Installing The Brocade Silkworm 12000/24000 Director; Figure 4-5 Removing The Front Door Of The Director - Sun Microsystems Brocade SilkWorm 3200 Rack Mounting Manual

Installing the Brocade SilkWorm 12000/24000
Director
Removing the Front Door of the Director
FIGURE 4-5
1. To remove the 12000 or 24000 director door, perform the following steps:
a. Open the door and locate the spring hinge pins on the left side.
b. Press down on the lower spring hinge pin to release it and press up on the
upper spring hinge pin to release it.
It might be helpful to use a screwdriver to pry the hinge pins.
c. Pull the door out to remove it.
28 Brocade Silkworm 3200, 3250, 3800, 3850, 3900, 12000, and 24000 Switches Rackmounting Guide • October 2004