The illustrations used in the manual are to illustrate the operation method and structure of the product. Where there is a small difference between the physical item and the illustrations, please take the physical as the standard. ABOUT THE PRODUCT: Cook smarter, live lighter.
SAFETY INSTRUCTIONS: NOTICE! The plate is hot after cooking. Please don’t touch with your hand! This appliance is for household use only. It is not suitable for commercial use. It must only be used for its intended purpose. This appliance is for indoor use only, it is not suitable for outdoor use. This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a...
Page 4
from the mains power. Wait for it to cool down completely. Then re-connect it to mains power and push the ON/OFF button to turn it on again. Do not insert anything into the vents of the appliance. This can cause an electric shock. Never attempt to lift or move the appliance during use.
INTRODUCTION TO INDUCTION COOKING: Induction cooking is a cooking method which a cooking vessel (pot or pan) is heated by magnetic induction rather than thermal conduction from a flame of electrical heating element on a traditional stove top. A magnetic field is generated from the coils under the surface of the cook top and heat is transferred directly into the pots and pans.
Page 6
UN-SUITABLE POTS/PANS FOR USE WITH THE INDUCTION COOKER Ceramic pot Anti-heating glass pan/pot Pot with curved base Pot with legs Diameter less than 12cm Alloy with low iron content **Aluminium cookware is also unsuitable. The induction cooker has an automatic pot checking feature which will not allow the appliance to operate if the pot or pan being used is not compatible.
FUNCTION DETAILS: FRY: Press “-” or “+” button to select temperature from 80 to 270 . There are 8 levels of temperature are selectable:80/100/130/160/180/210/240/270 left and right burner BOIL: Press “-” or “+” button to select power from 200 to 2000 watts. There are 8 levels of watt are selectable:200/600/800/1000/1300/1600/1800/2000 WATTS for left burner.
The device will come back to standby mode immediately after you input the time. The countdown timer will begin to countdown. After the set time has elapsed, the device will start to work under the function you selected (STEW/HEAT-UP). You may change the previous timer at any time. The other settings will remain.
TROUBLESHOOTING: PROBLEM CHECK POINTS REMEDY After connecting the Has the electricity supply Use after resuming the power and pressing been suspended? electricity. the ON/OFF button, the appliance has no Is the plug connected firmly? Check the root causes carefully. response. If the problem can’t be fixed, please contact service centre for Is the fuse broken down?
ERROR MESSAGES: Error codes occur E0 Without cookware or When showing error signal E0 or Incompatible cookware used E6 please check whether the cookware is not suitable, or Error Codes occur E1 Short circuit switch the appliance on again Error Codes occur E2 Overheat protection, internal after it is cooled down naturally.
Need help?
Do you have a question about the IC800 and is the answer not in the manual?
Questions and answers