Hytera DMR Application Note
  1. Manuals
  2. Brands
  3. Hytera Manuals
  4. Repeater
  5. DMR
  6. Application note
Hytera DMR Application Note

Hytera DMR Application Note

Hide thumbs Also See for DMR:
Table of Contents

Advertisement

Quick Links

Download this manual
DMR Conventional Repeater
Repeater Backup
Application Notes

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DMR and is the answer not in the manual?

Questions and answers

Related Manuals for Hytera DMR

Summary of Contents for Hytera DMR

  • Page 1 DMR Conventional Repeater Repeater Backup Application Notes...
  • Page 2 Copyright Information Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company) in the People's Republic of China (PRC) and/or other countries or areas. The Company retains the ownership of its trademarks and product names. All other trademarks and/or product names that may be used in this manual are properties of their respective owners.

  • Page 3: Table Of Contents

    Repeater Backup Application Notes Contents Contents Documentation Information ........................1 1. Overview ............................. 2 1.1 Definition ............................2 1.2 Applicable Repeater ........................2 1.3 Principle ............................2 1.4 Restriction ............................3 1.5 Version ............................3 2. Reference ............................4 3. Requirements ............................. 5 4.

  • Page 4: Documentation Information

    Repeater Backup Application Notes Documentation Information Documentation Information This section describes the conventions and revision history of this document. Conventions Icon Conventions Icon Description Indicates information that can help you make better use of your product. Note Indicates references that can further describe the related topics. Caution Indicates situations that could cause data loss or equipment damage.

  • Page 5: Overview

    (Work Repeater) fails, the other available repeater in backup state (Backup Repeater) will automatically take over the repeating function. Applicable Repeater This feature is available for DMR digital repeater and XPT repeater, including RD62X, RD96X, RD98X, and RD98XS. Principle The work repeater and backup repeater are connected using a backup cable, as shown below.

  • Page 6: Restriction

    Repeater Backup Application Notes Overview At this time, the backup repeater with LCD display (RD98X or RD98XS) shows an information box indicating the repeater backup status, and the backup repeater without LCD display (RD96X or RD62X) does not give any indications. ...

  • Page 7: Reference

    Reference Repeater Backup Application Notes 2. Reference  Applicable CPS help  Applicable application notes...

  • Page 8: Requirements

    Repeater Backup Application Notes Requirements 3. Requirements  Repeaters (such as RD98X, etc.) For information about repeaters, refer to the product catalog provided by us or contact your supplier.  Backup cable. This document takes RD98XS as an example to describe how to configure and connect the repeater.

  • Page 9: Connection And Configuration

    Repeater Backup Application Notes 4. Connection and Configuration Configuration Tools DMR CPS V8.0 (V8.00.09.007) or later must be prepared properly. Configuring the Repeater This section describes the configurations which must be made on both the work repeater and backup repeater.
  • Page 10 Repeater Backup Application Notes Connection and Configuration The following table lists the configurable parameters: Parameter Description This parameter allows you to set whether to enable the Repeater Backup repeater backup feature. This parameter allows you to set whether the work repeater is automatically disabled and whether the backup repeater shifts to be the work repeater in case of the work repeater Network...

  • Page 11: Connecting The Repeater

    Step 2 Connect the work repeater to the backup repeater using the backup cable. Connect one end of the backup cable marked by "Hytera" to the pin of the work repeater, and the other end of the cable to the pin of the backup repeater.
  • Page 12 Repeater Backup Application Notes Connection and Configuration The repeater connected to the end of the cable marked by "Hytera" automatically serves as the work repeater, and the other repeater as the backup repeater. The IP address confrontation alert will disappear after these two repeaters are connected through the backup cable.

  • Page 13: A Abbreviations

    Abbreviations Repeater Backup Application Notes A Abbreviations Abbreviation Full Name Customer Programming Software Digital Mobile Radio Internet Protocol OTAP Over the Air Programming RDAC Repeater Diagnostics and Control XNMS Extended Network Management System...
  • Page 14 Hytera Communications Corporation Limited. 2016 Hytera Communications Corporation Limited.

Table of Contents