Kenwood KDC-CMP59FM Instruction Manual page 21

Troubleshooting guide
MP3 source
?
Cannot play an MP3.67
Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo.
Use a medium conforming to ISO 9660 Level 1/2, Joliet, and
Romeo.
The MP3 has no or invalid track name
Add the ".MP3" extension to the MP3 track name.
The media is scratched or dirty.69
Clean the media, referring to the section on <CD cleaning> (page
8).
?
Noise or no sound generated when an MP3 is
The track has the MP3 track name extension while it is not an MP3.
Do not use the ".MP3" extension in non-MP3.
?
Takes time before the unit starts playing
The medium contains many albums, tracks, and hierarchical levels.
The unit checks all tracks on the loaded medium first. If the
medium has many tracks recorded, it may take a long time for the
unit before it starts playing MP3.
?
Fails to play MP3 in the intended
The MP3 tracks were not written by the CD writer in the order in
which you wanted them to be played.
Depending on the CD writer, you may be able to set the order in
which MP3 tracks are to be played by writing them onto a medium
with their track names beginning with play sequence numbers
such as "01" to "99".
?
The sound skips when an MP3 is being
The media is scratched or dirty.
Clean the media, referring to the section on <CD cleaning> (page
8).
The recording condition is bad.73-2
Record the media again or use another media.
?
Can't enter Folder Search mode.76
There's no folder recorded in the MP3 media.
Use a media with levels.
extension.68
played.70
MP3.71
order.72
played.73-1
?
The songs in the selected folder aren't played in Folder Search
mode.77
There are no MP3 in the selected folder.
Make sure there's recorded content in the MP3 media.
?
The MP3 track search takes
Many tracks are recorded on the media.
When the media directory is complex, the track search can take
time.
— 21 — — 21 —
time.78