Float
valve
32
SAVE THESE INSTRUCTIONS- FOR HOUSEHOLD USE ONLY
2022 Pressure Cooker .indd 32
Care & Cleaning (cont...)
Cleaning the float valve: Clean
the float valve using a pin to ensure
there is no debris trapped inside or
around it.
Check the valve can be raised
and will drop back down without
sticking.
Cleaning the thimble cover and
valve: The thimble cover is on the
inside of the lid and is only visible
when the inner lid is removed. Pull
the thimble cover off the valve
Use a pin or brush to remove any
blockages inside or around the valve
and cover. Replace thimble cover
by pushing back over the valve.
Pushdown until it locks in place.
Removing the gasket: Pull the
rubber gasket from the sides of the
inner lid.
Wash the gasket in warm soapy
water.
Refit the gasket around the edge of
the inner lid.
Slot the rubber ring back over the
post in the middle of the inner lid.
11/01/2022 09:21
Need help?
Do you have a question about the PRESSURE KING PRO and is the answer not in the manual?
Questions and answers