Philips AVENT SCF293 Manual page 22

Problem
Why is there a burning
smell and burnt mark
on the base?
Coating is peeling
off from the heating
plate. Does it affect the
function?
Why does the steriliser
stop working?
The items are still wet
after drying�
You may not have poured out the remaining water from the
large basket drip tray regularly� Water accumulates on the
large basket drip tray after each sterilising cycle� Pour out any
remaining water from large basket after each use�
1
Detach the bottom plate from the large basket� Pour out
any remaining water from the large basket drip tray�
2
Clean the bottom plate and the large basket in hot water
with liquid dishwashing detergent�
The items may not have been cleaned thoroughly before
sterilizing�
Before you put the items to be sterilised in the steriliser, clean
them thoroughly in the dishwasher or by hand with hot water
and liquid dishwashing detergent�
It does not affect the function of the sterilizer.
Make sure you do not use any abrasive or aggressive cleaning
agents (e�g� bleach) or a scouring pad to clean the heating
plate�
The heating plate may be blocked by the limescale� The
steriliser should be descaled at least every 4 weeks�
See section "Descaling"�
The items may still be wet due to different reasons:
• Ambient temperature or humidity
• Loading of steriliser
• The items stack together too closely
Make sure hot air is able to circulate around the items to ensure
effective drying. You can run one more complete drying cycle if
necessary�
- English 20 -
Solution