Fault Codes - Hyster H8.0-12.0XM-6 Manual

2200 SRM 1481
The following table provides fault descriptions and
corrective actions for hydraulic fault codes.
Fixed Alternating-
PT/(E) CH PT Function
Joystick Joystick Lift
Lift Lever Lever
Joystick Joystick Tilt
Tilt Lever Lever

Fault Codes

Table 5. Fault Codes
Pin No. Fault
Code
23 h0101
h0102
h0116
h0117
h0118
24 h0201
h0202
h0216
https://www.besttruckmanuals.com/
Fault Fault Description
Input too The joystick input is
low less than 0.25. volts
for less than 0.5 sec.
(Intermittent failure).
Input too The joystick input
high higher than 4.75. volts
for less than 0.5 sec.
(Intermittent failure).
Not Not all to be
calibrated calibrated values are
stored in the
controller correctly.
Not The joystick input is
calibrated, less than 0.25. volts
Input too for more than 0.5 sec.
low.
Not The joystick input
calibrated, higher than 4.75. volts
Input too for more than 0.5 sec.
high.
Input too The joystick input is
low less than 0.25. volts
for less than 0.5 sec.
(Intermittent failure).
Input too The joystick input
high higher than 4.75. volts
for less than 0.5 sec.
(Intermittent failure).
Not Not all values to be
calibrated calibrated are stored
in the controller
correctly.
Calibration
Corrective Action
Check input wire
harness, short to
ground. Check
joystick/lever.
Check input wire
harness, Loose
contact. Check
joystick/lever.
Recalibrate joystick/
lever. See
Calibration.
Check input wire
harness, short to
ground. Check
joystick/lever.
Recalibrate joystick/
lever. See
Calibration.
Check input wire
harness, Loose
contact. Check
joystick/lever.
Recalibrate joystick/
lever. See
Calibration.
Check input wire
harness, short to
ground. Check
joystick/lever.
Check input wire
harness, Loose
contact. Check
joystick/lever.
Recalibrate joystick/
lever. See
Calibration.
37