9-Troubleshoot ing
of a problem please check all shown possibilit ies and follow below inst ruct ions before you
cont act an after sales service. See CUSTOMER SERVICE.
WARNING!
▶
Before maintenance, deact ivate t he appliance and disconnect t he mains plug from
t he mains socket .
▶
improper repairs can cause considerable consequent ial damages.
▶
A damaged power cable should only be replaced by t he manufacturer, it s service
9.1 Informat ion codes
Following codes are displayed only for informat ion referring to t he washing cycle. No
measures must be performed.
Code
Message
The remaining wash cycle time will be 1 hour and 25 minutes.
1 : 25
The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 min-
6 : 30
utes.
P- - 1 / 2 / 3
1/ 2/ 3 addit ional rinses are choosen (see FUNCTION BUTTONS "Ext ra rinse").
End
Funct ion child lock is act ivated.
c Lr d
Door is closed because of high water level, high water temperature or spinning cy-
Loc
1-
cle.
The buzzer is deact ivated.
bEEP OFF
The buzzer is act ivated.
bEEP ON
Funct ion "Speed up" is act ivat ed.
SPEEd
up
9.2 Troubleshoot ing wit h display code
Problem
Cause
•
Drainage error
CLR FLTR
•
E2
Lock error.
•
E4
Water level not reached.
•
Drain hose is self- syphoning.
•
E8
Water protective level error.
22
.
Solut ion
•
•
Check drain hose inst allat ion.
•
Shut the door properly.
•
Make sure that tap is fully opened and water
pressure is normal.
•
Check drain hose installation.
•
Contact the After sales service.
GB