Connecting The Telephone Line Cord - Sharp AM-900 Online Manual

Installation

Connecting the telephone line cord

Insert one end of the line cord into the socket on the back of the machine
marked TEL. LINE. Insert the other end into a wall telephone socket.
Make sure that the line cord
is inserted into the TEL LINE
jack. Do not insert it into the
TEL. SET jack!
Setting the dial mode:
The machine is set for tone dialing. If you are on a pulse dial line, you must set
the machine for pulse dialing. Press the keys on the operation panel as
follows:
1
Make sure that the date and time
display of fax mode appears (if needed
FAX
press ) and then press
2
Press .
3
Press .
4
Select the dial mode:
TONE: PULSE:
5
Press repeatedly to exit.
14
Display:
FAX SETTING
MENU
.
1: DATE&TIME SET
1:TONE
The display briefly shows
your selection, then:
5: RINGER VOLUME