Subscribe to Our Youtube Channel
Related Manuals for TriBrer TB-700
Summary of Contents for TriBrer TB-700
- Page 1 OTDR Testing Platform TB-700 User’s Manual 2020-10-01 THU 10:08 Mini OTDR Loss Test OLA SE Distance Test Sequence Test System Settings...
-
Page 2: Precautions For Use
WARNING Any undefined change or modification of this manual will deprive you of the right to operate t- he equipment. To reduce the risk of fire or electric shock, do not expose the equipment to rain or humidity. To prevent electric shock, please do not open the shell, and it must be repaired by qualified p- ersonnel. - Page 4 HOST OTDR/OLS LED light 3.5 inch LCD RJ-45 test Type-C Power Bank RJ-45 cable test module...
-
Page 5: Keys Introduction
KEYS INTRODUCTION SA VE S ET TIN G M A R KER FILE > 2s L ED SC A N EN TE R + E S C= FU L L ES C 1 —— Press to enter the corresponding measurement setting interface. 2 ——... - Page 6 Main Menu After booting, main menu shows in default. Press Navigation buttons to select the function module, then press “ EN TE R ” button to enter into the corresponding interface. Title Bar: Highlight when the function module is selected. 2020-10-01 THU 10:08 LED light...
- Page 7 Mini OTDR OTDR testing interface as following shows. 2020-10-01 21:25 201001.sor File name A 0.000km Waveform region Scale 0.200km/div 4.00dB/div Distance and A-B: 000.000km 0.000dB 0.000dB/km Attenuation Event List Dis. Loss Ref. dB/km C.Loss 0.000 0.00 -51.74 0.00 -.-- 0.940 0.08 -51.74 0.24...
- Page 8 Mini OTDR--Measurement Settings In OTDR interface, press “ ” button to enter into measurement setting S ET TIN G interface. Under OTDR or measurement setting interface, press “ ” button SC A N to start measurement. Press again to stop the testing during the measurement. If “Real time analyse”...
- Page 9 Mini OTDR--Waveform Analysis After testing or open the saved waveform, then event list shows, Max. 5 events listed, if more, press “ ”“ ” to view, and the cursor will be located in selected event, short press “ ” to choose the cursor, and M A R KER scale current waveform by pressing combined buttons.
- Page 10 PD_074#0002 Rev.210202...
- Page 11 Mini OTDR--File SA V After testing, press “ ” to save the result, and will pop up soft keyboard FILE to edit the name. If “Auto name” is ON in system setting, then file will be auto-named when saving. SA V EN TE R If no testing, press “...
- Page 12 OLA SE 1 —— Measurement overview 2 —— Details of selected event 3 —— Location of each event 4 —— Events and distance between events 5 —— Measurement Status 6 —— PASS/FAIL 2020-10-01 21:25 201001.tor Pass OLA SE EventList 1310nm 1550nm 9.464dB 9.464dB 120.20431km 10.0003km...
- Page 13 OLA SE--Settings In OLA SE interface, press “ ” button to enter into “Settings”, and S ET TIN G press “ ” and Navigation buttons to set the parameters. EN TE R In OLA SE or Setting interface, press “ ”button to start SC A N measurement.
- Page 14 OLA SE--Event List / File SA V Press “ ” button to check the event list, and press “ ” button to FILE save the data. SA V If no testing, press “ ” button to enter the file list, then press “ ”...
- Page 15 Connecting the fiber to the OPM port and press “ ”“ ”“ ”buttons to switch the wavelength 850/1300/1310/1490/1550/1625nm, set reference value, and check reference value. Press “ ” to the OPM setting interface. S ET TIN G Auto λ: If ON, then OPM can identify the current wavelength in fiber automatically.
- Page 16 Connecting the fiber to OLS port, and press “ ”“ ” buttons to select the wavelength 1310/1550nm and modulation among continuous signal: 270Hz, 1kHz, 2kHz, 1kHz+Blink, 2kHz+Blink. 2020-10-01 21:25 Wavelength：1310nm Modulation:CW MAXIMUM OUTPUT<1mW WAVELENGTH 800-1700nm CLASS II LASER PRODUCT Change Switching wavelength modulation...
- Page 17 Loss Test Loss test refers to testing the fiber loss of the passive network. Inserting the standard fiber to OLS port and OPM port, turn on the OLS and set the reference value, then connecting the under-test fiber and check its loss value.
- Page 18 RJ-45 Net Cable Testing Connecting the host and remote cable module with a RJ45 cable, and start the measurement as prompts in the bottom. Distance test: Support to test the length of common CAT5/6 cable Sequence test: To check the connection quality of RJ45 terminations whether in right sequence order or abnormal situations such as poor/wrong connection, disconnection and so on.
- Page 19 System Settings Set each parameter by Navigation and ENTER buttons. · Auto Power Off： Set the time for power-off or cancel the auto power-off function · Auto Name： Auto-name the file when saving, can be OFF · Auto backlight off： Set the LCD standby time: close or 15s~10min ·...
Need help?
Do you have a question about the TB-700 and is the answer not in the manual?
Questions and answers
how do you download the fiber test results on my pc