Pc Adjustment - Sanyo POA-PN01A Owner's Manual

PC Adjustment

This function is to adjust the signal from the computer connected to the
projector to obtain the proper picture image on the screen. The available
parameters and operation are listed below.
Adjustment Items Operation
Auto PC adjustment Press the Start button to start automatic adjustment.
Fine sync Press the - or + button repeatedly to adjust the fine sync.
Total dots Press the - or + button repeatedly to adjust the number of total dots in
the horizontal period.
Position Press the Up, Down, Left or Right button repeatedly to adjust the pic-
ture position.
Comment Type the comment in the text area and then press the
These parameters will appear only when the analog computer input mode is selected.
Control the projector
Save
button.
PJ-Net Organizer
OWNER'S MANUAL
37