Table of Contents
Advertisement
Determination of Camera Installation Position (example)
•
Temporarily adhering the camera with the tape, locate a suitable installation position by adjusting
the camera angle so that the rear of the vehicle (bumper and other areas) is visible in the monitor.
•
Install the camera in a position that does not allow the illumination of a high-mount brake light to
reflect into the camera lens.
•
Make sure the camera does not contact or rub against the vehicle body when the rear door opens
or closes.
•
Removing and re-adhering the bracket will weaken the adhesion strength.
•
Position the camera so that it is not aimed directly at the headlights of rear-oncoming vehicles.
The recommended installation area is shown below:
Installing the camera outside of this area could result in reduced camera functionality and reduced
rear-view visibility.
Recommended
camera installation area
Center of vehicle
•
Installing the camera on the rear spoiler or liftgate. (example)
Need help? Call
1-800-421-5013
Note
• The camera can also be installed in the taillight/license plate area or on the rear window.
15.7
in
15.7
in
29.5
9.8
in
9.8
in
<Rear spoiler>
< Taillight/license plate area >
−11−
70.9
in
in
Camera
Camera
<Liftgate>
Camera
< Rear window >
Camera
Advertisement
Table of Contents
