Getting to know the settings
Note: Before you sterilise bottles and other items, clean them first.
Only place items in the steriliser which are suitable for sterilising� Do not sterilise items that
are filled with liquid, e.g. a teether with cooling fluid.
Sterilise
Before first use
When you use the appliance for the first time, we advise you to let it complete one
sterilisation process with empty baskets�
1
Use a clean baby bottle and pour exactly 130 ml water directly into the water
reservoir of the base�
Tip: This appliance has been designed to be used with tap water. In case you live in
an area with hard water, fast scale build-up may occur. Therefore, it is recommended
to use water without minerals such as distilled or purified water to prolong the
lifetime of your appliance. For more information on limescale, see section
"Descaling".
2
Place the large basket on the base�
• Sterilise mode is for sterilising baby items�
• A sterilising cycle takes approximately 10 minutes�
• Heating up takes approximately 4 minutes and
sterilising takes approximately 6 minutes�
• Make sure to pour exactly 130 ml water directly into
the water reservoir of the base �
- 8 -
130ml
130ml