Table of Contents
Advertisement
maintaining your appliance
Self-cleAninG
A self-cleaning oven uses high temperatures (well above cooking temperatures) to burn off leftover
grease and residue completely or reduce them to a finely powdered ash that you can wipe away
with a damp cloth.
•
During the self-cleaning cycle, the outside of the range can become very hot to touch.
Do not leave small children unattended near the appliance.
CAUTION
•
The health of some birds is extremely sensitive to the fumes given off during the self-
cleaning cycle of any range. Move birds to another well-ventilated room.
•
Do not
aluminum foil. Doing so will result in poor heat distribution, produce poor baking
results and cause permanent damage to the oven interior (aluminum foil will melt to
the interior surface of the oven).
•
Do not
system. Use care when opening the oven door after the self-cleaning cycle is
complete. Stand to the side of the oven when opening the door to allow hot air or
steam to escape. The oven may still be VERy HOT.
Before a self-cleaning cycle
Fig. 1
Fig. 2
32_ Maintaining your appliance
line the oven walls, racks, bottom or any other part of the range with
force the oven door open. This can damage the automatic door locking
•
We recommend venting your kitchen with an open window
or using a ventilation fan or hood during the self-cleaning
cycle.
•
Remove the wire rack, broil pan, broil pan insert, all
cookware and any aluminum foil from the oven.
•
Wipe up debris from the oven bottom. (Fig. 1)
•
The silver-colored oven racks can be self-cleaned, but they
will darken, lose their luster and become hard to slide.
•
Residue on the front frame of the range and outside the
gasket on the door will need to be cleaned by hand. Clean
these areas with hot water, soap-filled steel-wool pads or
Don't hand
cleansers such as Soft Scrub. Rinse well with clean water
clean the
and dry.
oven door
gasket.
•
Do not clean the gasket. The fiberglass material of the oven
door gasket cannot withstand abrasion. It is essential for
the gasket to remain intact. If you notice it becoming worn
or frayed, replace it. (Fig. 2)
•
Make sure the oven light bulb cover is in place and the
oven light is off.
You may
hand clean
the door.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DG68-00297A and is the answer not in the manual?
Questions and answers
When I press the timer it does not work. What **** I doing wrong?
The timer on the Samsung appliance with part number DG68-00297A may not work if the clock is not set to the correct time. The clock must be set properly for the timer functions to work. Ensure that the correct time is entered using the CLOCK pad and number pad, as described in the instructions.
This answer is automatically generated
i HAVE A DG68-0135A-00 MODEL AND I **** UNABLE TO USE THE OVEN BECAUSE THE DISPLAY CHOICES ARE BLACKED OUT
If the display goes blank on a Samsung oven, a fuse in your home may be blown, or the circuit breaker may have tripped. To fix this, replace the fuse or reset the circuit breaker.
This answer is automatically generated
Les 3 autre côté s’allume mais une ne s’allume pas ou est le problème s’il vous plait
The issue could be a blown fuse or a tripped circuit breaker. Check and replace the fuse or reset the circuit breaker if necessary. Additionally, ensure the electrical plug is properly inserted into a live, grounded outlet.
This answer is automatically generated