Samsung BN68-02714E-02 Quick Setup Manual

Quick Setup Guide

Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.
1-800-SAMSUNG (1-800-726-7864)
STOP
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park, NJ 07660-2112
Please do not return this unit.
Samsung Electronics Canada Inc.
If you have problems operating your 55 Standish Court Mississauga, Ontario L5R 4B2
TV, call: Call Center hours of operation: Mon-Sun, 9:00 AM -12
AM EST.
1-800-SAMSUNG (1-800-726-7864)
To register this product, visit: www.samsung.com/
For web support please visit:
register.
www.samsung.com/support
Step 1
: Install the Batteries into the Remote
To install batteries into your remote control, follow these steps:
1. Lift the cover on the back of the remote
upward as shown in the figure to the
right.
2. Install two AAA batteries.
✎
Make sure to match the + and -
ends of the batteries to the diagram
in the battery compartment.
3. Replace the cover.
Step 2
: Connect Power and Antenna or Cable
VHF/UHF Antenna
Connect Ant In to
Antenna Cable
(Not Supplied)
• Wall cable jack
• VHF/UHF Antenna
or
• Cable or Satellite box
Ant or Cable Out
Use a 75 ohm (round) cable.
Step 3
: Run Plug & Play
When you turn on your TV for the first time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language, set
the clock mode, and launch the TV's channel memorizing process. It also displays
connection instructions similar to those in this guide.To navigate while Plug & Play
is running, press the Up, Down, Left or Right arrow buttons on your remote. To
make a selection, press the ENTERE button. To skip a screen, press the
button. To turn on your TV, press the POWER button on the remote or on the TV.
To run Plug & Play, follow these steps:
1
Using your remote control, select
Plug & Play
the language for the On Screen
Select Language of the OSD.
Display (OSD), and then press
ENTERE button.
Menu Language :
2
Select Home Use, and then press
the ENTERE button. If you
select Store Demo, the TV will reset your picture and audio settings every 30
minutes.
3
Select Antenna Source. If Antenna Source is Air, Cable or Auto, you must
select your cable system type. After selecting source, select Search; then
press the ENTERE button on your remote.
✎
Most cable systems are Standard(STD) systems, If you are not sure about
what kind of cable system you have, contact your cable company.
✎
If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After
Plug & Play is complete, set your TV to Channel 3 or 4, according to the
directions for your cable or satellite box.
4
The TV memorizes the available channels. This process can take up to 45
minutes.
Step 4
: Connect External Devices
Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)
Use one of the connections below to connect your TV to an external A/V device.
We recommend using HDMI for the highest picture quality.
✎
When connecting to AV IN 1 on the back of your TV, attach the video cable (yellow) to the green jack next to the
AV IN 1 label. The jack will not match the color of the video cable (yellow).
Lowest Quality Connection
Audio/Video connection (480i only)
Audio Cable (Not Supplied)
AUDIO OUT
Video Cable (Not Supplied)
VIDEO OUT
5
After the TV has memorized the channels, choose the Clock Mode. Select
Auto if you have a digital channel in your area. Select Manual if you don't, or
if you have a cable or satellite box. When done, press the ENTERE button.
✎
If you select Manual, the clock setting screen appears.
6
Select the daylight savings time setting: Off or On, and then press the
MENU
ENTERE button.
✎
This function is only available when the Clock Mode is set to Auto.
7
Select the time zone in which you live, and then press the ENTERE button.
8
English
After the time zone screen, The connection method for best HD screen
Español
quality is displayed. Press Right arrow button on your remote to view each
Français
screen in succession. Press the Blue button to skip this section.
U Move E Enter
9
The Enjoy your TV. screen appears. Then press the ENTERE button.
Setting the Clock
Before you can use your TV's On/Off Timer, you must set the clock. To set the
clock, follow these steps:
button on your remote, then select Setup →
1. Turn on your TV, press the MENU
Time.
2. Select Clock Mode, and then press the ENTERE button.
3. Choose Auto or Manual.
x
If you select Auto, the current time will be set automatically using the time
from a digital channel.
x
If you select Manual, you can set the Month, Day, Year, Hour, Minute
and am/pm directly by pressing up, down, left and right arrow button on
your remote.
4. Press the RETURN button on your remote when done.
HDMI Cable (Not Supplied)
HDMI to DVI Cable (Not Supplied)
Audio Cable (Not Supplied)
Using an Audio/Video Cable Component Cable (Not Supplied)
DVD, Blu-ray player, cable box,
STB satellite receiver, VCR
Audio Cable (Not Supplied)
Device
Changing the Screen Size
Your TV has several screen size options, each designed to work best with specific
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the
you press it, your TV displays the current setting. Thereafter, each time you press
the P.SIZE button, you change the size of the picture on the screen.
The following sizes are available:
16:9 Wide screen
Zoom 1
✎
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
Connecting an audio device (Home Theater, etc.)
Connect your TV to your Home Theater or other
audio device to enjoy enhanced Sound quality.
Best Connection
HD connection (up to 1080p)
Using an HDMI Cable
HDMI OUT DVD, Blu-ray player, HD cable box,
HD STB (Set-Top-Box) satellite
receiver
Device
Very Good Connection
HD connection (up to 1080p)
Connecting a PC
Using an HDMI to DVI Cable
Connect your TV to a PC to use it as a Monitor.
DVI OUT
Device
AUDIO OUT
Good Connection
Component connection (up to 1080p)
Using a Component Cable
DVD, Blu-ray player, cable box,
COMPONENT OUT
STB satellite receiver, VCR
Device D-Sub Cable (Not Supplied)
AUDIO OUT
Changing the Picture Mode
Your TV has four preset Picture Modes with factory adjusted settings, each
designed to give you an excellent picture under specific conditions.
The Picture Modes are listed and described in the table below:
P.SIZE button on your remote. The first time
Mode
Dynamic
Standard
Natural
Movie
To change the Picture Mode, follow these steps:
4:3 Standard screen Wide Fit
1. Turn on your TV, press the
appears.
2. Using the ▲ or ▼ on your remote, select Picture Mode.
3. On the Picture Mode menu, use the ◄ or ► on your remote to select the
Picture Mode you want.
Zoom 2 Screen Fit
4. Press the
Analog Audio connection
Using an Audio Cable
Amplifier / DVD home theater
AUDIO IN
Audio Cable (Not Supplied)
Digital Audio connection
Using an Optical Cable
Digital Audio System
Optical Cable (Not Supplied)
OPTICAL
HD connection
HDMI to DVI Cable
(Not Supplied)
Using an HDMI to DVI Cable
DVI OUT
AUDIO OUT
Audio Cable (Not Supplied)
Using a D-Sub Cable
Audio Cable (Not Supplied)
AUDIO OUT
PC OUT
Description
Brightens picture. For a vibrant, enhanced image in brightly lit or
sunny room.
For a bright, detailed picture in a normally lit room.
For a comfortable, easy-on-the-eyes picture in a normally lit room.
For a studio quality cinema picture in a dimly lit or dark room.
TOOLS button on your remote. The Tools menu
EXIT button to exit the menu.