Digi SM-100 Service Manual page 97

All manuals and user guides at all-guides.com
SM100
9. SM100 ERROR MESSAGE
ERROR MESSAGE
The machine beeps and following error messages appear on display, if incorrect
operation is performed.
No. Error Message
1 PAPER END
2 FEED PAPER FIRST
3 PEEL LABEL
4 CHANGE PAPER
6 NON PRINT
7 UNIT PRICE OVERFLOW
9 NON LABEL
12 MEMO NOT INITIALIZED
14 HEAD IS NOT CLOSED
16 FILE MEMORY FULL
18 PLEASE REMOVE WEIGHT
19 PLU NOT EXIST
20 TOTAL PRICE IS 0
24 WEIGHT OF
26 TOTAL PRICE OVERFLOW
29 PLEASE SET TARE VALUE
39 PLEASE PRESS PLU KEY
44 KEY ALREADY ASSIGNED
48 PLU DATA INVALID
49 QTY OF
54 BELOW MIN WEIGHT
57 PRICE ACC OF
59 PLEASE SEE LABEL QTY
61 GRAND TOTAL OF
71 PRINT INHIBITED
74 SELF SERVICE MODE
95 CAL00 ERROR
96 CALSP ERROR
97 FORMAT ERROR
98 NO DATA IN REPORT
99 EXCEED WEIGHT QUOTA
Causes
Label sensor sense no label. No more labels. Replace
label roll
Label miss feed, press FEED key to align label.
Peel sensor activated, remove label away from sensor.
Change paper mode between label and receipt.
No manual printing.
Please check unit price.
No free format is programs. Set a free format or use
standard format.
Memory problem. Please clear the memory.
Thermal head no closed. Please close thermal head.
Not enough memory. Expand memory or delete
unnecessary data.
Fixed price item, please remove weigh.
No such PLU data or number exists.
No total price for item. Unit price, weight or quantity is
0.
Weight over maximum capacity when print.
Total price over the limit to display or print.
When force tare is enable, a tare weight must be entered.
Press PLU(#) key. To save data in some procedure.
Preset key already been assigned with function or PLU.
U1 only. Quantity setting incorrect when using FOR.
Quantity data over the limit.
Weight is below min weight set when printing.
Accumulated quantity over the limit.
Set print label quantity when the function is use.
Grand total price over the limit.
Cannot print weigh item at Prepack mode.
Can only use Self-service procedure only.
Zero point calibration error.
Full scale point Calibration error.
No free format is program.
There is no data in report when printing report.
CN only. Please reset weight quota.
ERROR MESSAGE