Starting The Calibration Programme - Miele WWH 860 Operating Instructions Manual

5. Starting the calibration
programme
For optimum water and energy
consumption and excellent wash
results, the washing machine must be
calibrated.
To do this, the Cottons programme
must be run without laundry and
without detergent.
No other programmes can be started
until calibration has been carried out.
The following message appears in the
display:
Turn on  and run "Cottons 90°C" without
laundry.
 Touch the  sensor until the
OK sensor lights up and confirm with
OK.
 
90° 1400
 
 Turn on the tap.
 Touch the Start/Add laundry sensor.
The calibration programme will start. It
will take approximately 2 hours.
At the end of the programme the
following message will appear in the
display:

Set up completed
Before using for the first time
 Take hold of the door and pull it
Useful tip: For safety reasons, close the
door when the machine is not in use.
Otherwise there is a danger of objects
being placed inadvertently in the drum.
If these remain unnoticed and were
washed in the next load, they could
damage the laundry. An open door is
also a danger to pets and children.
 Turn the programme selector to the
1:55
OK
open.
 position.
23