Characters on the controller are explained in this section.
Characters
* See the section "Operation mode ・function setting keys and characters" on page 15 for characters
of operation modes and functions.
3. Names and functions of parts
Identifier
Name
AStP
Auto stop setting
AStr
Auto start setting
End
Time up
cAL
Calibration offset setting
Lock
Key lock of settings
Power outage
Pon
compensation setting
Explanation of characters
Used for setting auto stop operation
Used for setting auto start operation
Displayed when timer operation has
ended.
See page 18 and 20.
Used for inputting a calibration offset
temperature.
See section "Using the calibration
offset function" on page 24.
Key locks settings to prevent their
alteration.
See section "Using the lock function"
on page 25.
Used for setting auto start operation.
See section "Using the power outage
compensation function" on page 26.
12
Application