Table of Contents
Advertisement
Troubleshooting
Make sure that your Monty is connected to the mains power.
To use the features in the Menu button, your radio needs to be turned on
by pressing the
button.
Make sure that you have connected the cable to the correct power
socket on the rear of your Monty. The power socket is on the right next
to the USB socket.
If using away from mains – has the Monty battery run out of battery
power? Try recharging.
If you experience a fault with the radio, you may be advised to complete
a factory reset, this will clear the memory of the radio and restart the
product.
28
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Monty and is the answer not in the manual?
Questions and answers
How to pre set and store radio stations
To preset and store radio stations on the MyVQ Monty:
1. Tune to the desired station.
2. Press and hold the MENU button.
3. Use the < and > buttons to select an available preset slot.
4. Press the OK button to confirm and save the station.
You can save up to 60 presets, separately for DAB and FM radio. You can save over an existing preset if needed.
This answer is automatically generated