Factory Reset - Philips 7000 Series User Manual

AV SYNC
Set the Audio Delay.
Video image processing, sometimes
longer than the time required to process
the audio signal. This is called "delayed."
Audio Delay feature is designed to
remedy this delay.
AV 00. AV 10 ... AV200
•
» By default, the audio delay is set
to 00.
CTR (Center)
Adjust the center channel volume
CTR-5 ... CTR+5
•
» By default, the center channel
volume is set to 0.
DISP (D
(no user action) for 3 seconds, and shall
be remembered and recalled at the next
power up.
ON
•
user action) for 3 seconds.
OFF
•
» By default, the display is set to ON.
BT PAIR
Enter the Bluetooth pairing mode.
•
If you want to connect your
soundbar with another Bluetooth
device, you can activation the pairing
in the menu (BT PAIR) to disconnect
all devices and enter the Bluetooth
pairing mode.
> select "BT PAIR" > Then
» Press
press
Bluetooth pairing mode.
Follow step 2-3 in "Play from
•
Bluetooth devices" above to pair
your Bluetooth device.
Note
•
The "BT PAIR" menu will only be displayed when
the current signal source is in "BT" mode
APD (Auto Standby)
The soundbar automatically turns to
Standby mode after about 15 minutes
if the TV or the external soundbar is
disconnected (or USB, BT function bit
playback pause), or switched off.
ON: Auto-Standby ON.
•
OFF: Auto-Standby OFF.
•
» By default, Auto-Standby is set
to ON.
DIM
Set display brightness.
HIGH, MID, LOW
•
» By default, the dimmer is set to
MID.

Factory reset

Reset device to default setting.
•
Turn on the soundbar, press and hold
the and
time for 8 seconds.
» Display shows "RESET" for 5
seconds.
» While system reboots, display
shows "REBOOT".
buttons at the same
EN 17