Advertisement
Quick Links
Problem
Cause
Restart/speed
Regulator is not bypassed
variation
Blades have wrong sweep
MAINTENANCE
Periodic cleaning of your ceiling fan is the only maintenance needed.
When cleaning, use only a soft lint-free cloth or a brush to avoid scratching the smooth
paint finish. You can use a moist cloth to remove stains if required. However, do not use
water directly. Abrasive cleaning agents are not required and should be avoided to prevent
damage to the outer finishing.
WARNING
• Do not use water when cleaning your ceiling fan. It could damage the motor by
causing a short-circuit and create the possibility of an electrical shock.
• Do not bend the blades while cleaning. A bend in the blade may result in unstable fixing
and affect air delivery.
Atomberg Technologies Pvt Ltd
Rupa Solitaire, Office No. 1205, Millenium Business Park, Mahape, Navi Mumbai 400 710.
Maharashtra, India W: www.atomberg.com
Plot No D-130 B, TTC Industrial Area, Shirawane, Navi Mumbai 400 706.
Solution
Make sure the regulator is
eliminated from the connection
Check the sweep of the blades
with the fan sweep before
assembling
Corporate office:
Manufacturing unit
CEILING FAN
+
RENESA SMART
App
Works with
IOT enabled
works with
Ok Google
Google is a trademark of Google LLC.
INSTRUCTION
MANUAL
IMPORTANT NOTE:
Read this manual carefully before installing or operating your
new Atomberg RENESA SMART+ Ceiling Fan. Ensure you save
this manual for future reference.
Advertisement
Related Manuals for Atomberg RENESA SMART +
Summary of Contents for Atomberg RENESA SMART +
- Page 1 Rupa Solitaire, Office No. 1205, Millenium Business Park, Mahape, Navi Mumbai 400 710. Read this manual carefully before installing or operating your Maharashtra, India W: www.atomberg.com new Atomberg RENESA SMART+ Ceiling Fan. Ensure you save Manufacturing unit this manual for future reference.
- Page 2 • Observe the following to reduce the risk of fire, electric shock or injury: Only use this unit the shackle to the hanger or ceiling hook using the in the manner intended by Atomberg. If you have any questions regarding the product, screws provided with the package. Fasten the nut, please contact Atomberg.
- Page 3 Step 3. Align the holes on the blade shank with the motor WARNING holes. Securely fasten the blades with the screws and washer provided. • Any connection to wires must be securely sealed using electrical insulation tape to prevent WARNING electric shocks or fire hazard.
- Page 4 Renesa Smart+ is a loT enabled smart fan that works with Amazon Alexa App/Echo and Google Home App/Assistant it can also be controlled by Atomberg Application.The fan's main switch can be used to control Shackle kit rattling Make sure that the screws and its speed.
Need help?
Do you have a question about the RENESA SMART + and is the answer not in the manual?
Questions and answers