Setting The Key Wipeout Timer - Centurion Smart GUARD Operating Instructions Manual

5
Sets the number of seconds for which keystrokes remain valid.
This ensures that if a partial code has been entered, it is wiped
out of the keypad buffer after a preset time, and must be re-
entered in its entirety. The clearing of the keypad buffer is
indicated by the keypad back light changing from bright (active)
to dim (standby). Default wipeout timer = 15 seconds.
Enter the following keystrokes:
1. Enter Program mode
2. Select Wipeout menu 5 #
3. Enter Wipeout time
4. Exit Program mode
Notes:
If the Wipeout time is set to 0, key wipeout will be disabled.
Compromise the security of the system.
Cause a code entry to be incorrectly recognised as a
WRONG CODE if an incomplete code was previously
entered.
If key wipeout is disabled, the keypad back light will remain
in bright mode.
14

Setting the key wipeout timer

IMPORTANT
Disabling the key wipeout timer will:
Master Code
Seconds #
#
INDICATOR LED's