Casio CTK-4000 User Manual page 52

Recording Your Keyboard Play
To record to Tracks 1 through 6
1.
Record the first part to Track 1.
To record to Track 1, perform steps 1 through 4 under
"Recording and Playing Back Keyboard Play" (page
E-48).
Lights
2.
4
Press .
This will enter record standby.
Flashes
3.
Press a button from
number of the next track to which you want to
record.
This will enter record standby for the track you selected.
Example: Track 2
Flashes
• If you want to use a different tone than the one you
used in Track 1, press
input the tone number.
4.
bl
Press .
This will start playback of what you recorded up to this
point in other tracks and record what you play on the
keyboard to the currently selected track. Play the notes
you want on the keyboard.
5.
To stop recording, press
• To play back what you have recorded, press
bl
Each press of starts and stops playback.
E-50
Lights
Flashes
bt cn
to to select the track
Flashes
bo br
and then use (10-key) to
bl
.
bl
6.
Repeat steps 2 through 5 to record the other
tracks.
7.
After you finish recording all of the tracks,
bl
press
• This will start playback of the recorded tracks. Press
to stop or restart playback.
• At this time you can turn off playback of specific tracks
using buttons
of each track on (track number displayed) or off (track
number not displayed).
• If you want to re-record a track, press
return to step 2 of the above procedure. Only the tracks
that are turned on (displayed) above will play as you
re-record.
Example: Tracks 2 and 3 selected
8.
4
Press
■ To delete a recorded track
After step 3 of the above procedure, do hold down
pressing any keyboard key) until the message "Tr.Del?"
appears on the display. Press [+] (YES) to delete the track, or
[–] (NO) to cancel the delete operation.
again.
.
bs cn
to . Pressing a key toggles playback
Disappears
twice to exit the recorder mode.
Disappears
bl
4
. This will
4
(without
B