Usb Connection; Music Control - Harman JBL PARTYBOX 710 Owner's Manual

To reconnect the Bluetooth enabled device:
• When you turn on this speaker next time, it tries to reconnect
the last connected device automatically.
• If not, manually select "JBL PartyBox 710" on your Bluetooth
device to connect.

6.2 USB Connection

Plug a USB storage device that contains playable audio contents
into the USB port of the speaker.
J The speaker switches to the USB source automatically.
J Audio playback will start automatically.
Tip:
– The speaker plays audio files on the USB storage device from the
root folder to the last level of subfolders in alphabetical sequence.
Up to 8 levels of subfolders are supported.
Supported audio formats
Extension Codec Sample rate
WAVE PCM 44.1KHz ~ 192KHz
LPCM 44.1KHz ~ 192KHz
IMA_ 44.1KHz ~ 192KHz
ADPCM
MPEG 44.1KHz ~ 192KHz
MULAW 44.1KHz ~ 192KHz
MP3 MPEG1 32KHz ~ 48KHz
layer1/2/3
MPEG2 16KHz ~ 24KHz
layer1/2/3
MPEG2.5 8KHz ~12KHz
layer3
WMA ≤ 320Kbps

6.3 Music Control

• Press
• Press
• Press
• Rotate the volume knob clockwise or counterclockwise to
increase or decrease main volume.
• Press BASS BOOST to enhance the bass level: level 1, level
2, or off.
Note:
– The skip operation is unavailable in AUX mode.
Bitrate
< 5Mbps
< 5Mbps
< 5Mbps
< 5Mbps
< 5Mbps
32Kbps ~
320Kbps
8Kbps ~
160Kbps
8Kbps ~
160Kbps
8Kbps ~
48Kbps
once to pause or resume playback.
twice to skip to the next track.
three times to skip to the previous track.
x 1
x 2
x 3
9 9
www.jbl.com