Table of Contents
Advertisement
1.4 DESCRIPTION of EQUIPMENT
1.4.1 NAMES AND OPERATION OF EACH COMPONENT
Panel Unit
Panel Unit
(1)
S (Speed) LED (Green)
(2)
L/A (Link/Act) LED (Orange)
(3)
Network port
(auto detects
10BASE-T/100BASE-TX)
DIP SW
SW 1
SW 2
SW 3
SW 4 (Reserve)
*1) When DHCP disabled, IP Address is 192.168.192.168.
PR-LN4 Software Guide
3
2
1
Function
Turns on when the connection is detected as 100BASE-TX.
Turns off when not connected or when the connection is detected as
10BASE-T.
Turns on when a link is established as 100BASE-TX or 10BASE-T.
Flashes when receiving a packet.
Connects to the network cable.
(Category 5 or higher for a 100BASE-TX network)
Function
OFF
DHCP Enabled
-
-
-
DIP SW
1 2 3 4
6 / 34
ON
(*1)
DHCP Disabled
Initialize the LAN card settings.
Print the list of present setting value.
-
Advertisement
Table of Contents
