Table of Contents
Advertisement
„ Setting and operating procedures
Follow the steps to configure marking settings and perform marking.
A typical step by step example is given below.
1. Start Laser Marker NAVI smart
1) Start Laser Marker NAVI smart
2) Open a marking file to edit
2. Create a marking file (offline mode)
1) Create a marking object
2) Specify the layout of a marking object
3) Set laser parameters
3. Save marking data to your PC
4. Connect your PC and the laser marking system
5. Start the laser marking system
6. Establish an online connection
7. Transfer a marking file from your PC to the laser marking system
8. Start laser radiation for marking
1) Check the marking position using the guide laser
2) Turn laser pumping on
3) Perform test marking
9. Terminate the operation
20
ME-NAVIS2-QR-1
Advertisement
Table of Contents
