Introduction - Keysight Technologies N5991ST3A SATA User Manual

3 Using the Software

Introduction

24
Once the DUT has been configured, click OK in the Configure DUT panel.
All calibration and test procedures are included in the respective groups in
a way similar to how they are organized in the UTD.
Figure 10 SATA N5991 ValiFrame main window
The parameter grid on the right-hand side of the window shows the
parameters that are related to the selected procedures. The log list at the
bottom of the window shows calibration and test status messages (regular
progress updates as well as warnings and error messages).
To start one or more procedures, check the corresponding box to select
them. Then the Start button is enabled and turns green (highlighted in
Figure 10). Clicking on the Start button runs the procedure.
Keysight N5991 SATA Test Automation Software Platform User Guide