Advertisement
4. MAINTENANCE
WARNING! Disconnect Stapler/Nailer from mains power supply before changing accessories, servicing or
performing maintenance. Replace or repair damaged parts. Use recommended parts only. Unauthorised
parts may be dangerous and will invalidate the warranty.
4.1
If the stapler jams, unplug from the power supply.
4.2
Take out the loading spring and empty out all remaining staples/nails
4.3
Slide the metal guard off of the nozzle of the stapler/nailer (fig 3).
4.4
Proceed to unclip the metal plate (fig 4) and free any obstructions.
4.5
Carefully reassemble in reverse order before plugging back into the power supply and
resuming the task.
If stapler requires cleaning, use a clean cloth to remove dirt.
DO NOT use solvents when cleaning plastic parts.
DO NOT oil or grease any part of this tool.
All other service, maintenance and repairs must be carried out by an authorised service agent.
fig 1
fig 2
fig 3
fig 4
Original Language Version
23/10/09
AK7063
Issue: 2 -
Advertisement
