Advertisement
3. SPECIFICATION
Model No: ......................................................................CP20VPHT
Battery: ................................... CP20VBP2, CP20VBP4, CP20VBP6
Blade length .......................................................................... 450mm
No load speed .....................................................................1300rpm
Running time approx: .......................... 2Ah - 50mins; 4Ah -100mins
Teeth distance ......................................................................... 15mm
Voltage ........................................................................................20V
Sound pressure level, L
PA
Sound power level, L
........................................................91dB(A)
WA
Vibration value .................................................................. 1.843m/s²
Uncertainty ............................................................................ 1.5m/s²
4. ATTACHMENT TO POLE
4.1.
ATTACHMENT TO THE TELESCOPIC POLE
WARNING! Before fitting trimmer head to pole switch off and remove the battery.
‰
4.1.1.
Turn the attachment locking nut (fig.3) at the end of the telescopic pole Model
No.CP20VTP (sold separately) so that the Hedge Trimmer head can be inserted.
Push the Trimmer head home (fig.4) making sure the electrical contacts at the end
of both components are aligned correctly (telescopic pole contact (fig.1), trimmer
head contact (fig.2)).
4.1.2.
Tighten the attachment locking nut to secure both components together (fig.3).
4.1.3.
To separate again reverse sections 4.1.1 and 4.1.2
fig.3
Attachment locking nut
5. OPERATION
WARNING! Ensure all Safety Instructions in Section 1 are read
‰
and understood and carried out before use. Save the instructions
and warnings for future reference
5.1.
SWIVEL HEAD ADJUSTMENT
WARNING! Before making swivel head adjustments switch off
‰
and remove the battery.
5.1.1.
The hedge trimmer is fitted with a head that can be adjusted
through 6 different positions to a total of 112.5°.
5.1.2.
To adjust the position, unlock the head by pressing both of
the two large adjustment buttons either side of the cutter head
(fig.5).
5.1.3.
Rotate the head to the desired position and then release the
buttons to lock the head in place.
5.2.
SHOULDER HARNESS
5.2.1.
Securely fasten the buckle (fig.6) and hook the harness clasp
onto the telescopic poles hook fixing bracket (fig.7).
5.2.2.
Place the harness over your right shoulder only (fig.8).
5.3.
USING THE TRIMMER HEAD
5.3.1.
Stand on a stable surface, and hold the tool away from the
branches so that the angle of the tool is at 60° or less against
the horizontal ground (fig.9).
5.3.2.
Start the tool, and then press the shear blades onto the branch
lightly. When cutting long and thin branches, in order to control
the drop position of cut branches, divide the branch in sections
and cut the branch from the tip.
WARNING! Pay attention to the falling branches since they may
‰
bounce in the direction of the operator after hitting the ground.
5.4.
CARRYING THE CORDLESS TRIMMER
5.4.1.
Prior to carrying the cordless trimmer remove the battery and fit
the blade guard (fig 10).
© Jack Sealey Limited
....................................................78dB(A)
Original Language Version
fig.1
fig.4
Trimmer tube
fig.5
Adjustment buttons
fig.6
fig.8
fig.10
fig.2
Telescopic pole
fig.7
fig.9
60°
CP20VPHT Issue 1 22/10/21
Advertisement
