Table of Contents
Advertisement
Quick Links
AIR CONDITIONER (ACCESSORY)
Installation Manual
3DW Diffusor
Model name:
TCB-TDL0141SDY-E
TCB-TDL0181SDY-E
TCB-TDL0271SDY-E
TCB-TDL0141SDY-TR
TCB-TDL0181SDY-TR
TCB-TDL0271SDY-TR
For commercial use
Ticari kullanım için
English
Español
Français
Italiano
Deutsch
Português
Polski
Česky
Русский
Hrvatski
Magyar
Türkçe
Nederlands
Ελληνικα
Svenska
Suomi
Norsk
Dansk
Română
Български
Eesti
Latviski
Slovenčina
Slovenščina
Advertisement
Table of Contents
Related Manuals for Toshiba TCB-TDL0141SDY-E
Summary of Contents for Toshiba TCB-TDL0141SDY-E
- Page 1 Español AIR CONDITIONER (ACCESSORY) Français Installation Manual Italiano Deutsch Português For commercial use Polski 3DW Diffusor Česky Ticari kullanım için Model name: Русский Hrvatski TCB-TDL0141SDY-E Magyar TCB-TDL0181SDY-E Türkçe Nederlands TCB-TDL0271SDY-E Ελληνικα TCB-TDL0141SDY-TR Svenska Suomi TCB-TDL0181SDY-TR Norsk TCB-TDL0271SDY-TR Dansk Română Български...
-
Page 2: Table Of Contents
(in both high and low temperature), electric shock, fracture, poisoning, etc. • Thank you for purchasing TOSHIBA 3DW Diffusor. *2: Minor injuries refer to those injuries, scalds, electrocutions, etc. that do not require hospitalization or long-term follow-up •... -
Page 3: Packing List
Packing List Part Names Vertical louver (swing left and right) Please confirm that the following parts are included. Part Quantity Part Quantity Front panel assembly Heat insulation sponge * Upper and lower heat insulation for Panel mounting frame (652 × 25 × 15: 014 Type) (852 ×... -
Page 4: Location For Installation
– 3 – Location for Installation Space for Installation WARNING CAUTION • If the user inserts his finger or other object into the air outlet during the operation of the air conditioner, it may cause injury • If the distance D between the indoor unit and the wall is less than 91 mm or greater than 1000 mm, this product cannot be or electric shock. -
Page 5: Installation Of 3Dw Diffusor
Installation of 3DW Diffusor Sticking sponge on mounting frame • Please stick 2 pieces of sponge (5) and 2 pieces of sponge (6) that are attached with the machine to the fixed screws for mounting frame (3). • Please stick the attached sponge (7) onto the above sponges, the sponge (7) on the left and right sides can be directly WARNING stuck, and cut the remaining sponge (7) according to the actual length and stick it onto the top and bottom of the mounting frame. - Page 6 – 5 – Air duct connection: if 101 < D ≤ 1000 Drilling on the wall • Please install the indoor unit and connect the pipelines. Perform the heat insulation treatment on the refrigerant Install the air duct on the frame and stick the sponge. connecting pipe and drainage pipe.
-
Page 7: Installation For Front Panel Assembly
Fixing front panel assembly Installation for Front Panel Assembly • First thread the connecting wire of the front panel assembly (1) to the wall opening, and then push the front panel assembly (1) into the opening. Sticking the sponge onto the front panel assembly (direct connection (only if 91 <... -
Page 8: Wiring
– 7 – Installing horizontal louver Plug of PCB board • Please install in the reverse order of removal. • Plug the connector of the wire into the PCB board socket “CN510: white”. • To protect the PCB board from the external pressure , fix the connecting wire on a wire clip on the back of the side cover of the PCB board about 100 mm away from the plug with the binding belt (10). -
Page 9: Setting Parameter
Setting Parameter CAUTION • Please follow the wire as shown above to avoid condensation water flowing down the wire to the electronic components. • When routing wires, ensure that the connecting wires shall not be clamped by objects like the terminal block. CAUTION •... -
Page 10: Trial Operation And Inspection
– 9 – Trial Operation and Inspection Before trial operation • Ensure that the horizontal louver (two pieces) are firmly inserted into the axis on the right and that the clearance on the right side of the horizontal louver is even. Clearance The clearance on the right Inserte the horizontal... -
Page 11: Fan Characteristics
Fan Characteristics Pressure loss characteristic curve when the horizontal louver blowing downward Pressure loss characteristic curve when the horizontal louver blowing horizontally SSD P-Q characteristic curve 051 Type 071 Type 091 Type 012 Type Standard air volume : 450 (m Standard air volume : 540 (m Standard air volume : 570 (m Standard air volume : 600 (m... - Page 12 D0X7203601-00...