Mounting to the Video Camera
Mounting the Supplied RC Board
When the RC (aspect ratio converter) board supplied
with the OHB-730WS/730WSP/750WSA/750WSAP
is mounted in a BVP-900/950-series video camera, the
aspect ratio conversion function (from 16:9 to 4:3) can
be applied.
1
Open the side panel of a BVP-900/950-series video
camera, and pull the PR/DA boards out.
BVP-900/900P
PR/DA board
2
Remove the CN-1566 board attached to the DA
board by loosening the two screws.
PR/DA board
3
Mount the RC board to the DA board in place of
the CN-1566 board, and secure it with the original
two screws.
PR/DA board
4
Return the PR/DA board to its original position,
and close the side panel.
6(E)
BVP-950/950P
PR/DA board
CN-1566 board
RC board