Page 4
TS-3310UH 无线麦克风 功能示意 接收机正面板: ① 功能按键:用于通道选择、频率调整、对频、扫频等工作; ② 液晶显示:显示对频工作状态、频率、接收信号电平等信息; ③ IR红外对频窗口:配合“SET”键,将频率参数传至发射机; ④ 电源开关:控制机内电源供应。 ③ ① 6 .200 643.700 FREQUENCY FREQUENCY POWER ③ ① ② ④ 接收机背面板: ① 天线:A/B天线; ② 音频平衡输出:采用“XLR”型插座,提供各通道独立信号输出; ③ 混合音频输出:将两路的音频信号混合成一路输出; ④ 电源插座:连接DC 12V电源至输入插座;插座的中心电极连接正电压。 DC13-15V 450mA ANT-B MIC-B OUTPUT MIX OUTPUT...
Page 5
TS-3310UH 无线麦克风 LCD液晶屏幕显示: ① RF指示:显示接收信号强度; ② AF指示:显示声音信号强弱; ③ FREQUENCY:显示当前工作频率; ④ G:显示默认群组; ⑤ CH:显示默认频道。 ① ② ④ ⑤ 6 .200 643.700 FREQUENCY FREQUENCY ③ ① 手持发射器: ① 网头及音头模组:网头用以保护将声音转换成电信号的 音头模组,并能防止麦克风放置在台面时滚动; ② 显示屏:显示工作频率、电池电量等信息; ② ③ 电源开关:用于开启/关闭发射机电源; ③ POWER POWER ④ 麦克风管体:管端装配网头、音头模组、管体内装电池、 ⑤ 发射电路板、尾部内置发射天线;...
Page 6
TS-3310UH 无线麦克风 使用说明 1. 手动频率调节 在初始界面下,短按两下“SET”按键,待调整通道的显示屏闪烁选频,点按“ ”键与“▼”键 ▲ 可调节当前使用的频率,当已调整到需要使用的频率时,停止短按,频率跳动停止,频率调整 成功。打开发射机电源,将发射机上的红外接收窗口“IR”与接收机上的红外发射窗口“IR” 成直线相对(对频距离可选择在10cm-30cm之间),此时点按“SET”键,屏幕窗口显示如下 图对频界面后显示对频搜索信息,对频成功后,接收器和发射器频率显示一致。如果对频不成 功可重新点按“SET”键继续对频,直至对频成功。 2. 红外对频操作 在初始界面下选定使用频道后,打开发射设备电源,将发射设备上的红外接收窗口“IR”与接 收设备的红外发射窗口“IR”窗口成直线相对(对频距离可选择在10cm-30cm之间),此时短 按一下“SET”键,屏幕窗口显示如下图对频界面后显示对频搜索信息,对频成功后,接收器和 发射器频率显示一致。如果对频不成功,可重新短按“SET”键继续对频,直至对频成功。 6 .200 643.700 FREQUENCY FREQUENCY FREQUENCY 643.700 FREQUENCY POWER POWER 3. 频率编号调节 在初始界面状态下,点按“SET”按键三下,待频率编号显示闪烁,按“ ”键与“▼”键调节至 ▲ 所需频率编号(共“00~14”个频率编号数字可供调节),频率编号选定后按“SET”键确认。 4. 自动扫描操作 在初始界面状态下,点按“SET”按键四下,然后点按对应通道的“ ”或“▼”键,接收机的对 ▲...
Wireless Microphone Preface Dear Customer, Thank you for purchasing Takstar TS-3310UH Wireless Microphone. In order to better understand and use the product, please read this manual carefully. If you have any questions or suggestions, please contact our local dealer. Features High-performance UHF integrated circuit, multiple frequency channels selectable, •...
TS-3310UH Wireless Microphone Function Descriptions Receiver Front Panel ① Function Button: used to select channel, adjust/sync/scan frequency, etc. ② LCD Display: displays sync status, frequency, received signal level, etc. ③ IR Sync Window: sends frequency parameters to transmitter, used in conjunction with the [SET] button.
TS-3310UH Wireless Microphone LCD Display ① RF Indicator: displays the received signal strength. ② AF Indicator: displays the audio signal strength. ③ FREQUENCY: displays the operating frequency. ④ G: displays the default group. ⑤ CH: displays the default channel. ① ②...
Page 13
TS-3310UH Wireless Microphone Operation Instructions 1. Adjust Frequency Manually On home screen, short press [SET] button twice, then short press [ ] or [▼] of the corresponding ▲ channel to adjust its operating frequency to desired, and stop pressing until the frequency stops blinking.
TS-3310UH Wireless Microphone Safety Instructions To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk and injury or property loss due to improper use, please read and observe the following items before use: 1. Please check if the power of the connected equipment matches with that of this product before operation.
Need help?
Do you have a question about the TS-3310UH and is the answer not in the manual?
Questions and answers