Junkers Ceraclass midi ZS 24-2 DH AE 23 Installation And Operation Manual page 15

Machine Translated by Google
B Remove the plugs from the gas and water connections.
Removing the control panel and jacket
For electrical safety reasons, the jacket and
control panel are secured against unauthorized
removal with two screws.
The jacket and control panel are always fastened with
these screws.
B Loosen the safety screws on the power panel
control.
FIG. 9 Safety screws
B Fold the control panel up and then fold it down.
FIG. 10 Service position for access to water and electricity systems
6 720 608 487
B To remove the control panel completely, when it is positioned as in
Fig. 10, get up and pull forward.
FIG. 11 Removing the control panel
B Loosen the jacket retaining bolts.
B Remove the bottom of the jacket and slide it into
their.
FIG. 12 Remove the jacket
Fixing the boiler
B Attach the gaskets to the double socket of the
mounting fittings.
B Lift the boiler and attach it to the mounting bracket
on the wall.
B Place the boiler on the connections of the prepared pipes
In this regard.
Installing
15