Table of Contents
Advertisement
18.1 Emergency release
unlock door
Required: The drain pump is empty.
→ Page 39
1. ATTENTION! Running water can
lead to material damage.
▶
Do not open the door if water can
be seen behind the glass.
Pull down and release the
emergency release with the aid of a
tool.
a The door lock is unlocked.
Place the service door and click it into
2.
place.
Close the service door.
3.
19 Transport, on-
hit and drain
Here you will find an explanation of
how to prepare the device for
transport and storage. We also
explain how to dispose of old
appliances.
19.1 Dismantling the device
Remark: Detailed instructions for use
can be found at www.siemens-
home.bsh-group.com or by scanning
the QR code on the title page of these
operating instructions.
Transport, storage and disposal NL
Close the tap.
1.
Empty the water inlet hose.
2.
Turn off the device.
3.
Unplug the appliance from the
4.
mains.
Let the suds drain.
5.
→ "clean drain pump",
Page 39
Disassemble the hoses.
6.
19.2 Installing transport locks
Secure the device before transport
with the transport locks to avoid
damage.
Remove the 4 cover caps using a
1.
screwdriver.
Keep the cover caps.
Install the 4 transport locks. When
2.
doing so, observe the description
Removing transport locks and
proceed in reverse order.
19.3 Restarting the device
For more information, see
▶
→ "Set up and connect"
Page 13 and
→ "For the first use",
Page 21 .
53
Advertisement
Table of Contents
