Regulatory Notices Safety and Operational Informaton WELCOmE Thank you for choosing the Plantronics .Audio the most from your new headset solution, we recommend that you take the following steps: Read this User Guide, including all the safety information at the end of this guide, before you use your headset.
PACkAgE CONTENT ANd FEA TurES Call control button Wind screen Adjustable ear loop Ear tip Charging jack Noise canceling microphone Headset USB Charging Cable PerSonoCall Pairing/Connect Button Indicator Light Please refer to the separate Safety Instructions for important product safety information prior to installation or use of the product.
POWEriNg Powering uSB Bluetooth Adapter The USB Bluetooth adapter is automatically powered on upon inserting into the USB port of the computer. If your USB port on the computer is hard to access, you can use a USB extension cable (not included). NOTE: The USB Bluetooth adapter is automatically active with the current paired headset upon powering on.
USB port. iNSTALLiNg PErSONOCALL Plantronics PerSonoCall and the internet calling application on your computer. PerSonoCall software provides the ability to remotely detect and answer/end a call from your internet calling application via the headset call control button.
PrOPEr FiT Lift the ear loop. Swivel the ear loop to the right to wear it on your left ear, or swivel it to the left to wear it on your right ear. Place the ear loop behind your ear. Rotate the headset so that the speaker rests comfortably in your ear.
For internet calling applications Not Compatible with PerSonoCall Check the PerSonoCall compatibility list at www.plantronics.com/personocall for the most current information on internet calling application compatibility. If your internet calling application is not currently supported by PerSonoCall, remote detection and answer/end via the headset does not function.
TiPOiNT Plantronics Audio .920 supports multipoint technology, which allows you to switch between two different Bluetooth audio devices. This enables you to use one headset between two different phones. Pair another Bluetooth device Repeat the pairing steps with the new device.
The USB Bluetooth adapter is not set as the default audio device. Use the Audio settings in Windows® under Sounds and Audio De- vices to select “Plantronics BT Adapter” as the audio device. Listening volume is too low. Press the volume up button on the headset.
3. Connect the equipment into an outlet on another circuit. 4. Consult the dealer or an experienced radio/TV technician for help. NOTE: Modifications not expressly approved by Plantronics, Inc. could void the user’s authority to operate the equipment. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. Independent studies have shown that the internal wireless radio is safe for use by consumers. Visit www.plantronics.com for more information. industry Canada radio Equipment The term “IC:”...
Need help?
Do you have a question about the 920 and is the answer not in the manual?
Questions and answers