Basics; Making Calls - Sony SPP-S9101 Operating Instructions Manual

Basics

Making calls

(REDIAL)
(*TONE)
Additional tasks
To
Adjust the handset volume
Switch to tone dialing temporarily Press (*TONE) after you're connected.
Notes
• When you increase the sound volume, in some cases the background noise
may be increased as well. You should adjust the volume accordingly.
• If the handset beeps every second during conversation and "OUT OF
RANGE" appears on the display, move closer to the base unit; otherwise, the
call will be disconnected after one minute.
1
2
VOL switch
3
4
Do this
Set the VOL switch to H (high), M (middle)
or L (low).
The line will remain in tone dialing until
disconnected.
Pick up the handset from the
base unit.
Press (TALK) and wait until
"TALK" appears on the display.
The display also shows the
operation duration in hours,
minutes and seconds.
The dialing keys light up.
You then hear a dial tone. If you
hear five short error beeps and
"OUT OF RANGE" appears on
the display, move closer to the
base unit.
Dial the phone number.
When you're done talking, press
(OFF) or replace the handset on
the base unit.
The display goes off.
continued
17 US
Basics