Related Manuals for TOOLSTATION WESSEX ZD176PA-30L-1600W
Summary of Contents for TOOLSTATION WESSEX ZD176PA-30L-1600W
- Page 1 Original User’s Instructions 30L Wet & Dry Vacuum Cleaner With power take off SKU: 17353 READ BEFORE USE PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE...
-
Page 2: Table Of Contents
CONTENT WHAT’S IN THE BOX ---------------------------------------------------------- 3 TOOLS REQUIRED------------------------------------------------------- 4 SPECIFICATIONS -------------------------------------------------------------- 4 EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS ---------- 5 IMPORTANT SAFETY WARNINGS -------------------------------------------- 6 PRODUCT DESCRIPTION AND IDENTIFICATIONS ------------------------ 8 ASSEMBLY AND OPERATING INSTRUCTIONS -----------------------------9 CARE AND CLEANING ------------------------------------------------------- 17 TROUBLE SHOOTING -------------------------------------------------------- 18 DECLARATION OF CONFORMITY / PERFORMANCE -------------------- 21 ENVIRONMENTAL INFORMATION ------------------------------------------22... -
Page 3: What's In The Box
WHAT'S IN THE BOX Vacuum assembly Hose Hose adaptor Extension tubes x 3 Tube holder Hepa locking nut Cartridge filter (Hepa) Crevice nozzle Duel action floor brush Caster x 4 Foam filter Dust bag x 3 If you do not have all these items, please contact: www.coreservice.co.uk Hotline: +44 01904 947568 Email support@coreservice.co.uk... -
Page 4: Specifications
SPECIFICATION • 1600W • 230V~,50Hz • Max Vacuum Pressure : 23kPa Max Air • Flow : 42.8L/sec Stainless steel tank • Blower Function • 5m power cable • Power tool take off socket: 1500W max Power tool take off function (Applicable to (circular saw, drill, sanding ma-chine, etc...) Technical Data Model... -
Page 5: Explanations And Symbols, Cautions And Warnings
EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS Warning! Read the instructions Wear eye protection Wear a dust mask. Wear hearing protection. Wear protective gloves. Wear face protection. Wear tight-fitted protective clothes. Switch the product off and disconnect it from the power supply before assembly, cleaning, adjustments, maintenance, storage and transportation. -
Page 6: Important Safety Warnings
IMPORTANT SAFETY WARNINGS WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term 'power tool' in the warnings refers to your mains- operated (corded) power tool or battery operated (cordless) power tool. - Page 7 5. Never pull the plug out of the socket by pulling the cable. 6. Never leave the appliance unattended when ready for use. 7. Keep away from children and pets. 8. Take care to ensure that the power cable does not get damaged by being run over, crushed, pulled or similar.
-
Page 8: Product Description And Identifications
PRODUCT DESCRIPTION AND IDENTIFICATIONS Air flow adjustment Stainless steel deck Carry handle Caster Duel action floor brush Extension tube Power tool take off socket Water outlet cover Latch 10. Hose Not all the accessories illustrated or described are included in standard delivery. -
Page 9: Assembly And Operating Instructions
ASSEMBLY AND OPERATING INSTRUCTIONS Intended Use: The wet and dry vacuum cleaner is designed for wet and dry vacuuming using the appropriate filter. The appliance is not suitable for the vacuuming of combustible, explosive or harmful substances. The machine is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. - Page 10 Insert the casters into their sockets on the underside of the container and apply pressure until the casters snap into place. Attach filter (not required for blowing), see dry or wet operation for correct use of filter. Place the power head back onto the container, secure into place by clamping shut the latches.
- Page 11 10. Connect the extension tubes with hose Dry vacuum operation Ensure that the power cord is disconnected from the power outlet. Remove the power head from the container as shown in the assembly instructions. 3. Fit the HEPA to the underside of the power head. Unlock the latch and pull out machine head.
- Page 12 Firmly fit the dust bag over the suction hole until you hear a click ensuring the hole is completely covered. Warning! Assemble the dust bag incorrectly may causes dust leaking. Place the machine head back onto the vacuum body and lock the latch correctly. Connect the power cord to a suitable power outlet.
- Page 13 Wet vacuum operation Ensure that the power cord is disconnected from the power outlet. Unlock the latches Take out of the machine head Fit the foam filter to the underside of the power head; take care not to damage the filter.
- Page 14 Put the machine head back to the vacuum body and lock the latch correctly. The extension tubes need to be assembled Switch on the vacuum and proceed to clean. (I=ON) Switch off the vacuum before emptying. (O=OFF) When emptying the container take care as this may be heavier than you think. 10.
- Page 15 Cartridge Filter – For dry applications Use the cartridge filter in position over the lid cage for most general dry material pick up. With the tank cover in an upside down position, slide the cartridge filter down over the lid cage, pushing until the filter seals against the cover. Place filter retainer into the top of the cartridge filter, hold the tank cover with one hand, turn the handle on the filter locking nut clockwise to tighten, locking the filter into place.
- Page 16 IMPORTANT When vacuuming large volumes of liquid, do not immerse the nozzle completely in the liquid; leave a gap at the tip of the nozzle opening to allow for air inflow. The machine is fitted with a float valve that stops the suction when the container reaches its maximum capacity an increase in motor speed will be heard.
- Page 17 BLOWING OPERATION IMPORTANT! Before commencing please ensure you have read and understood all the safety instructions. Ensure that the power cord is disconnected from the power outlet. No filter is required for blowing operations. Ensure that the container is completely empty before commencing.
- Page 18 Connect the power cord to a suitable power outlet. Before switching on, make sure you have a firm hold of the hose end. Switch on the vacuum and proceed to clean. (I=ON) If blowing out dusty environments, always wear a suitable dust mask. Protect eyes with suitable safety goggles and ensure no one else is nearby when operating.
- Page 19 Power tool take off socket operation Input voltage rating 220-240 V ~ 50 Hz Max Wattage from Motor 1600W Max Wattage from power take off 1500W socket This vacuum cleaner has a power take off feature which permits the cleaner to be coupled with a power tool, providing dust extraction.
-
Page 20: Care And Cleaning
Do not oil the motor. Store in a dry place. Serviceable parts can be bought instore or online from Toolstation: www.toolstation.com SKU:48051 Wessex 30L Wet & Dry Vacuum Cleaner Dust bag 3 PACK SKU:88410 Wessex 30L Wet & Dry Vacuum Cleaner Cartridge filter (HEPA) -
Page 21: Trouble Shooting
TROUBLE SHOOTING Use this section to help you to try and solve any problems you may have: PROBLEM POSSIBLE CAUSES REMIDIES Product does Not connected to power supply Connect to power supply not start Power cord or plug is defective Check by a specialist electrician Other electrical defect to the Check by a specialist electrician product... - Page 22 PROBLEM POSSIBLE CAUSES REMIDIES Dust not being Worn dust bag / dust filter Replace with a new suitable part retained in the Dust bag / dust filter not Check and re-attach properly vacuum (dry properly attached vacuuming Defective attachment / Replace involved part with a configuration) extension tube / hose / handle /...
-
Page 23: Declaration Of Conformity / Performance
Product Description : Wessex 30L Wet & Dry Vacuum Cleaner Toolstation Limited, Express Park, Bristol Road, Bridgwater, Somerset TA6 4RN This declaration of conformity is issued under the sole responsibility of Toolstation Object of the declaration The object of the declaration described above is in conformity with the relevant... -
Page 24: Environmental Information
ENVIRONMENTAL INFORMATION The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. -
Page 25: Guarantee
All Toolstation products are individually tested before leaving the factory. If you are a consumer and you experience a problem with your Toolstation product, which is found to be defective due to faulty materials or workmanship within the Guarantee Period, this Toolstation Guarantee will cover repair or - at the discretion of Toolstation –...
Need help?
Do you have a question about the WESSEX ZD176PA-30L-1600W and is the answer not in the manual?
Questions and answers