Different Play Modes: Shuffle And Repeat; Programming Track Numbers; Reviewing The Programme; Erasing The Programme - Philips MCM148 User Manual

CD/MP3 Operation
Press TUNING 4 ¢ (on the remote
3
control ¡ / ™ ) to select a desired track.
Press 2; to start playback.
4
●
During playback, press CLOCK/DISPLAY on the
remote control to show the title name, album
name, ID3 information and clock time.
Supported MP3 disc formats:
– ISO9660, Joliet, UDF 1.5
– Maximum title number: 999 (depending on
filename length)
– Maximum album number: 99
– Supported sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
– Supported Bit-rates: 32~256 (kbps), variable
bitrates
Different play modes: SHUFFLE and
REPEAT
You can select and change the various
play modes before or during playback. The
play modes can also be combined with
PROGRAMME.
SHUF .....................tracks of the entire disc are
played in random order
REP ALL ...............repeats the entire disc/
programme
REP .........................plays the current track
continuously
REP ALB ............. repeats all tracks in the current
(for MP3/WMA only) album
To select your play mode, press MODE on the
1
set or press REP, REP ALL or SHUF on the
remote control before or during playback until
the display shows the desired function.
Press 2; to start playback if in the STOP
2
position.
If you have selected SHUFFLE, playback starts
➜
automatically.
To return to normal playback, press MODE on
3
the system or press REP, REP ALL or SHUF on
the remote control until the various SHUFFLE/
REPEAT modes are no longer displayed.
●
You can also press 9 to cancel your play mode.
Note:
– The SHUFFLE and REPEAT functions cannot be
used simultaneously.
14

Programming track numbers

Programme in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
40 tracks can be stored in the memory.
In the stop position, use the TUNING 4 ¢
1
(on the remote control ¡ / ™ ) to select your
desired track number.
●
For MP3/WMA, you may press ALBUM/
PRESET + / - to select a desired album, then
press TUNING 4 ¢ (on the remote
control
¡ / ™ ) to select your desired track.
Press PROG. to store.
2
Display: flashes, and -- PR 01 is
➜
prog
displayed briefly, then the selected track
number (and the selected album number for
MP3).
Repeat steps 1-2 to select and store all desired
3
tracks.
To start playback of your disc programme, press
4
2; .

Reviewing the programme

●
Stop playback and press PROG repeatedly.
●
To exit review mode, press Ç .

Erasing the programme

You can erase the programme by:
●
pressing 9 once in the STOP mode;
●
pressing 9 twice during playback;
●
opening the CD compartment;
disappears from the display.
➜
prog