Troubleshooting; Reset - Philips GOGEAR SA1MXX02P User Manual

10 Troubleshooting

If the GoGear Mix is not working properly or
the display freezes, you can reset it without
losing data:
How do I reset the GoGear Mix?
• Insert a pen tip or other object into the
reset hole located at the bottom of the
GoGear Mix. Hold until the player shuts
down.
•
If the reset option is unsuccessful, follow
the steps how to recover the GoGear
Mix with the Philips Device Manager:
1
On your computer, select Start >
Programs > Philips Digital Audio Player
> GoGear Mix Device Manager > Philips
Device Manager to launch the Philips
Device Manager.
2
Turn off the GoGear Mix before you
continue.
3
Press and hold the volume button
while you connect the GoGear Mix to
your computer.
4
Keep holding the key until the Philips
Device Manager acknowledges the
GoGear Mix and enters the recovery
mode.
5
On the computer, click the Repair
button and follow the instructions of the
Philips Device Manager to complete the
recovery process.
6
When the recovery is completed,
disconnect the GoGear Mix from your
computer.
7
Restart the GoGear Mix.
EN
19