Panasonic EH-SA31 Service Manual page 5

4.2. CAUTION ASSEMBLY
1. Allocate two ferrite cores to A and B positions.
2. Insert the boiler block into housing.
Note :
Allocate the power switch to OFF position.
Store the lead wires into the hooks.
4.3. CHECKING AFTER REPAIR
• Pour water into the water supply tank full and turn on the switch. Check if the ionized steam comes out in approximately 30 sec-
onds.
• Check if the ion steam comes out for approximately 12 minutes and beads of hot water are not released.
• No leakage.
• No scratches.
3. Set the power switch button after insert the boiler block
into housing.
5