Page 1
ISSUE 2.0 COIN AND CARD METER/TIMER MANUFACTURERS ESTABLISHED 1976 DUAL COIN OPERATED ELECTRONIC METER & TIMER MODEL TYPE: M-101 USER MANUAL FOR SPECIFICATION AND OPERATING SETTINGS TEL: 01803 697 600 WWW.RDLMETERS.COM SALES@RDLMETERS.COM MID APPROVED COIN METER | CERTIFICATE NO: 0120/SGS0260...
Page 2
Rate 1 and 2 ........10 4.9 Standing Charge per 24 hours .....10 If returning the meter, please contact RDL Meters Ltd to report the return and to arrange an RMA 4.10 Operation Mode Meter or Timer ..10 (Return Merchandise Authorisation) number. Make sure that the meter is carefully packed.
à Up to 2 tariff rates 3.1 Normal Operation Display à Switching capacity up to 100A During normal operation the display on the M-101 in METER MODE will be one of those shown à à No battery replacement required below.
Page 4
METER MODE METER MODE 3.6 Emergency Credit STEP DISPLAY REMARKS If the prepaid credit is below a given limit or the meter has gone into debt, an “Emergency **DISPLAY*TEST** Credit” facility may be invoked by pressing the RED button marked emergency credit. The meter Test all character positions on display operation whilst in emergency credit is explained in the following subsections.
Page 5
METER MODE METER MODE Example 3: Each press of the GREEN button will increment the value above the cursor. Each press of the RED button for less than 3 seconds will move the cursor one place through the programmable DISPLAY ACTION setting of the displayed parameter.
METER MODE METER MODE 4.2 Factory Defaults Reset WIRING DIAGRAM AND MOUNTING TEMPLATE DISPLAY REMARKS FACTORY DEFAULTS WIRING DIAGRAM If Factory Defaults are reset then the following parameters are changed: Factory a Current Credit Defaults £0.00 b Emergency Credit Left £1.00 No Yes c Current Debt...
à When a valid coin is inserted, time credit is copied to the timer During normal operation the display on the M-101 in TIMER MODE will be one of those shown below. à Multiple coins may be entered in one session à...
Page 8
TIMER MODE TIMER MODE 3.4 Disconnection 4. PRIVATE MODE PROGRAMMING 3.4.1 No Remaining Credit 4.1 Programming Method When the prepaid credit expires the timer main contactor will be open, thus disconnecting the After REMOVING THE CASH BOX and pressing either of the exposed recessed black private mode power.
Page 9
TIMER MODE TIMER MODE 4.3 Date and Time STEP ACTION DISPLAY The following date and time parameters are settable: Day, Month, Year, Hours, Minutes. Press either private mode switch button PROGRAMMING 4.4 Zero Time Credit Press and release the RED button for less than 3 Date and Time Manually reset credit to zero.
This Declaration of Conformity is issued under the sole responsibility of RDL Meters Ltd. The fulfilment of the essential requirements set out in Annex I and in the relevant instrument specific RDL Meters Ltd declares that the new Measuring Instrument described hereafter as M-101 Dual Annexes has been demonstrated.
Page 11
ESTABLISHED 1976 RDL METERS LTD. TEL: 01803 697 600 UNIT E2 WESTFIELD BUSINESS PARK LONG ROAD PAIGNTON WWW.RDLMETERS.COM DEVON SALES@RDLMETERS.COM TQ4 7AU...
Need help?
Do you have a question about the M-101 and is the answer not in the manual?
Questions and answers