NEC 1000BASE-T Manual page 14

This section describes what you should not do when attaching/detaching this
product. Damages on N8403-012 adapter and/or the server (CPU blade and Blade
Server Assemble Unit) due to negligence of any of these are not covered by the
warranty.
To attach/detach N8403-012 adapter to/from the server, make sure to remove
the CPU blade that you intend to attach/detach it from the cabinet. Otherwise,
N8403-012 adapter and the server may be damaged.
To prevent any damage on components due to static electricity, make sure to
discharge static electricity from yourself before you touch N8403-012 adapter.
Never touch N8403-012 adapter's LAN port, terminals of components or
uncoated metal parts on adapter. Otherwise, taint, erosion or others may cause
loose connection. Do not touch this product with wet or dirty hands.
On some servers, you may not be able to smoothly insert N8403-012 adapter. If
so, be careful not to damage the server and/or the adapter itself by inserting
N8403-012 adapter.
When you insert N8403-012 adapter into expansion slot, be careful not to touch
the tip of bracket to other parts of server (such as other components or board).
Otherwise, they may be damaged.
If anything goes wrong with this product, contact your sales agent.
Use a cable compatible with this adapter's interface. Confirm the place you
should insert the cable. Otherwise, it may cause a failure.
When connecting the cable, insert the cable connector until you hear a click
sound.
Do not stress the cable mechanically by stepping on or placing a heavy object, or
do not heat the cable. When you unplug the cable, unlock it first, hold the
connector and pull it straight. Otherwise, it may be damaged.
If anything goes wrong with this product, contact your sales agent.
N8403-012
Caution Observe fully.
Caution Observe fully.
- x -
1000BASE-T 接続ボード(2ch)
1000BASE-T Adapter(2ch)