Wood-mizer BMS200 Safety, Operation, Maintenance & Parts Manual
  1. Manuals
  2. Brands
  3. Wood-mizer Manuals
  4. Power Tool
  5. BMS200
  6. Safety, operation, maintenance & parts manual

Wood-mizer BMS200 Safety, Operation, Maintenance & Parts Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

BMS200/250 SHARPENER
Safety, Operation, Maintenance
& Parts Manual
BMS200
BMS250
Safety is our #1 concern! Read and understand
!
all safety information and instructions before
operating, setting up or maintaining this machine.
This is the original language
for the manual.
rev. B.05
rev. B.05
Form #944_en

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BMS200 and is the answer not in the manual?

Questions and answers

Related Manuals for Wood-mizer BMS200

Summary of Contents for Wood-mizer BMS200

  • Page 1 BMS200/250 SHARPENER Safety, Operation, Maintenance & Parts Manual BMS200 rev. B.05 BMS250 rev. B.05 Safety is our #1 concern! Read and understand all safety information and instructions before operating, setting up or maintaining this machine. Form #944_en This is the original language...

  • Page 2: Table Of Contents

    Face Grind Adjustment....................2-9 Grind Depth Adjustment ..................2-12 Oil Flow Adjustment ....................2-12 Feed Rate Adjustment ..................... 2-13 2.10 Magnetic Shut-off (not in BMS200, BMS250 EC Version) ........2-13 2.11 Blade Rejection ....................... 2-13 2.12 Operation Overview ....................2-14 2.13...
  • Page 3 Grinder Asembly ....................... 7-3 Sharpener Mounting Plate ..................7-6 Blade Clamp Assembly ..................... 7-7 Oil Pump/Pan, Control Box, BMS250 ..............7-9 Oil Pump/Pan, Control Box, BMS200 ..............7-11 Cam Assembly......................7-13 Cover Assembly ...................... 7-15 7.10 Alignment tool&Blade ProfileTemplate ..............7-17...
  • Page 4 Take notice of all safety warnings throughout this manual and those posted on the equipment. Keep this manual with this equipment at all times, regardless of ownership. *Wood-Mizer is a registered trademark of Wood-Mizer Products, Inc. ® CBNdoc121616 Table of Contents...

  • Page 5: General Contact Information

    Getting Service Wood-Mizer is committed to providing you with the latest technology, best quality and strongest customer service available on the market today. We continually evaluate our customers’ needs to ensure we’re meeting current wood-processing demands. Your comments and suggestions are welcome.

  • Page 6: Branches & Authorized Sales Centerswood-Mizer Locations (North And South America)

    Branches & Authorized Sales CentersWood-Mizer Locations (North and South America) EUROPE UNITED STATES European Headquarters World Headquarters Wood-Mizer Industries Sp. z o.o. Wood-Mizer LLC Nagórna 114, 62-600 Koło, Poland 8180 West 10th Street Tel.: +48-63-26-26-000 Indianapolis,Indiana 46214-2400, Fax: +48-63-27-22-327 www.woodmizer.eu Tel.: +1-317-271-1542...
  • Page 7 CROATIA Krešimir Pregernik ITALY Pasquale Felice SERBIA Dragan Markov Pregimex d.o.o. Wood-Mizer Italia Srl Wood-Mizer Balkan d.o.o. S. Batušiæa 31, 10090 Zagreb Cda. Capoiaccio SN Svetosavska GA 3/3; P. Fah 25 Tel.:/Fax: +3851-38-94-668 86012 Cercemaggiore 23 300 Kikinda Krešimir Pregernik Campobasso Tel.:/Fax: +381-230-25-754...
  • Page 8 Brazil Headquarters Europe Headquarters Serving Brazil Serving Europe, Africa, West Asia Wood-Mizer do Brasil Wood-Mizer Industries Sp z o.o. Rua Dom Pedro 1, No: 205 Bairro: Sao Jose Nagorna 114 Ivoti/RS CEP:93.900-000 62-600 Kolo, Poland Tel: +55 51 9894-6461/ +55 21 8030-3338/ +55 51 Phone: +48.63.26.26.000...

  • Page 9: Safety & General Information

    Safety & General Information SECTION 1 SAFETY & GENERAL INFORMATION This symbol calls your attention to instructions concerning your personal safety. Be sure to observe and follow these instructions. This symbol accompanies a signal word. The word DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

  • Page 10: If You Need To Order Parts

    US Headquarters and Manufacturing Facility in Indianapolis, 8180 West 10th Street, USA at 1-800-525-8100. Please have the machine identification number and your customer number ready when you call. Wood-Mizer will accept these methods of payment: Visa, Mastercard, or Discover ...

  • Page 11: Electrical Safety

    Safety & General Information Electrical Safety Possible combinations: Model Version Voltage Standard Description code code Sharpener / economy /1x110V 60Hz/ UL Sharpener / economy /1x230V 50Hz/ Sharpener / economy /1x230V 60Hz/ UL Sharpener / personal /1x110V 60Hz/ UL Sharpener / personal /1x230V 60Hz/ UL Sharpener / personal /1x230V 50Hz/ CE Electrical Safety DANGER!
  • Page 12 Safety & General Information Machine Operation DANGER! Make sure all guards and covers are in place and secured before operating the sharpener. Failure to do so may result in serious injury. DANGER! Keep all persons away from moving parts when operating this machine (2 meters at least).

  • Page 13: Sharpener Components

    Safety & General Information Sharpener Components Sharpener Components The BMS250 sharpener is designed for sharpening only Wood-Mizer blades with 9.29, 10.30, 13.29, 7.34, 7.39 and 4.32 profiles. See Figure 1-1. The major components of the sharpener are shown below. Blade Support Arms...

  • Page 14: Overall Dimensions And Other Technical Data

    Safety & General Information Overall Dimensions and Other Technical Data Overall Dimensions and Other Technical Data See Table 1-2. The overall dimensions and the weight of the BMS250 sharpener (without the blade support arms) are listed below. Length Width Height Weight BMS250 627mm...

  • Page 15: Noise Level

    Safety & General Information Noise Level Noise Level See Table 1-3. The noise level produced by the BMS250 sharpener is given below Noise Level BMS250 61,3 dB (A) TABLE 1-3 1.10 Motor Specifications See Table 1-4. The grinder motor specifications are listed below. Motor Manufacturer Model...

  • Page 16: Control Panel Components

    Safety & General Information Control Panel Components 1.12 Control Panel Components See Figure 1-5. The BMS250 control panel components and their descriptions are shown below. S10364-P3 CBNSH35D Grinder Motor Coolant Pump Cam Motor Disconnect Emergency Feed Rate Dial Start/Stop Switch Start/Stop Switch Start/Stop Switch Stop...
  • Page 17 Safety & General Information Control Panel Components Feed Rate Dial  Controls cam speed. Rotate dial as necessary to increase or decrease cam speed. Grinder Motor Start/Stop Switch  Starts/Stops grinder motor. Cam Motor Start/Stop Button  Press the Cam Motor Start Switch to start the cam motor. NOTE: Place the Feed Rate Dial in the "0"...
  • Page 18 Safety & General Information Control Panel Components See Figure 1-7. The control panel components of the BMS200 version and their descriptions are shown below. Power ON/OFF Feed Rate Dial Grinder Motor and Button Coolant Pump Switch FIG. 1-8 Grinder Motor and Coolant Pump Start/Stop Switch ...

  • Page 19: Warning Decals Description

    Safety & General Information Warning Decals Description 1.13 Warning Decals Description See Table 1-6. The pictographic decals that warn and inform the user are shown and described below. TABLE 1-6 Decal View Decal No. Description S10364-P3 "Hazardous voltage". S10364-P3 086362 General warning symbol 086362 099220...
  • Page 20 Safety & General Information Warning Decals Description TABLE 1-6 095961 "Use ACP-1 oil." 095961 S12004G-1 CAUTION! Always wear safety goggles when operating the sharpener! S20097C 2800 RPM - Motor rotation direction P85070 CE safety certification 1-12 AS80doc121616 Safety & General Information...
  • Page 21 Safety & General Information Warning Decals Description TABLE 1-6 521825 Clean the sharpener every 12 hours 521825 Safety & General Information AS80doc121616 1-13...

  • Page 22: Setup & Operation

    SETUP & OPERATION Machine Start SECTION 2 SETUP & OPERATION Machine Start IMPORTANT! Before starting to use the machine you have to meet the following conditions: Fasten the sharpener to a table top using the mounting holes located in the foot ...

  • Page 23: Blade Support And Cover Bumper Installation

    SETUP & OPERATION Blade Support and Cover Bumper Installation Operator’s Position Have a qualified electrician make the power supply. The power supply must meet  the specifications given below. 2-Phase Fuse [A] Suggested Wire Size Volts 230 VAC 10 A 1.5 mm at least 16AWG at least...
  • Page 24 SETUP & OPERATION Blade Support and Cover Bumper Installation See Figure 2-1. To install the guides, join one guide assembly around the end of each blade support arm. Face the post outward as shown. Bolt from the hexed side of the guide assembly (these hex-shaped holes will keep the bolts from turning once in place).
  • Page 25 SETUP & OPERATION Blade Support and Cover Bumper Installation See Figure 2-2. FIG. 2-3 SETUP & OPERATION AS80doc121616...

  • Page 26: Blade Height Adjustment

    SETUP & OPERATION Blade Height Adjustment Blade Height Adjustment The BMS250 sharpener is equipped with a blade height adjustment assembly that allows smooth height adjustment of 1”, 1 1/4”, 1 1/2”, 1 3/4" and 2" wide blades. To install the blade, release the blade clamp by pushing the clamp handle down. See Figure 2-4.

  • Page 27: Grinding Wheel Installation

    SETUP & OPERATION Grinding Wheel Installation Grinding Wheel Installation Use a Wood-Mizer approved grinding wheel. To install: 1. Push the START button on the control box and turn the FEED RATE dial up to rotate the cam. 2. Rotate the cam until the sharpener head is at its highest setting. Turn the FEED RATE all the way down and push the STOP button.

  • Page 28: Blade Installation

    SETUP & OPERATION Blade Installation Blade Installation See Figure 2-6. Before installing a blade, push the cam motor START switch and turn the FEED RATE dial until the cam pivot bolt is at the 2 o'clock position. Cam pivot bolt at Cam Pivot bolt 2 o’clock at 2 o’clock...
  • Page 29 SETUP & OPERATION Blade Installation See Figure 2-8. Position the blade inside the left and rear blade support posts. FIG. 2-9 See Figure 2-10. Position the blade outside the right blade guide wheel. FIG. 2-11 Holding the blade with your left hand, lift the sharpener head. Then raise and hold the indexing arm up, loosen the blade clamping fixture and press the blade between the clamping plates.

  • Page 30: Face Grind Adjustment

    SETUP & OPERATION Face Grind Adjustment Bend the blade wiper on the left side of the sharpener so that it touches the blade. The wiper will wipe coolant from the blade into the oil pan so it does not drip on the floor. Face Grind Adjustment As you operate the sharpener, the cam will rotate causing the index arm to contact a tooth and push it to a position under the grinding wheel.
  • Page 31 SETUP & OPERATION Face Grind Adjustment CBNSH11 Face Grind Adjustment Face Grind Adjustment Knob Knob FIG. 2-13 SETUP & OPERATION AS80doc121616 2-10...
  • Page 32 SETUP & OPERATION Face Grind Adjustment See Figure 2-14. Proper position of the grinding wheel to blade during sharpening is shown on the picture below. CBNSH37B FIG. 2-15 2-11 AS80doc121616 SETUP & OPERATION...

  • Page 33: Grind Depth Adjustment

    Tooth height is determined by how much material is removed from the gullet of the blade. The Wood-Mizer sharpener is equipped with a grind depth adjustment bolt that controls how far the grinding head comes down and therefore controls the gullet grind. (See Figure 2-10.)

  • Page 34: Feed Rate Adjustment

    The Feed Rate Dial controls cam speed. During the sharpening cycle, adjust cam speed to have as fast of a feed rate as possible without "burning" the blade. 2.10 Magnetic Shut-off (not in BMS200, BMS250 EC Version) See Figure 2-17. The shut-off sensor is located to the right of the blade clamp assembly.

  • Page 35: Operation Overview

    6. After about ten teeth have been ground, mount the orange-painted magnet right behind the blade wiper. (See Section 2.11.) If you use the BMS200, BMS250 EC, mark the start of sharpening with a sticker or marker.

  • Page 36: 2" Blade Sharpening

    SETUP & OPERATION 2" Blade Sharpening 2.14 2" Blade Sharpening To sharpen 2" blades, it is necessary to mount the bushing supplied with the BMS200/250 sharpener. See Figure 2-19. Mount the bushing to the sharpener head bracket as shown below.

  • Page 37: Maintenance

    Oil Level Periodically check the oil level and refill with oil as necessary. The oil level should be kept between 4.5 and 5 litres. Use only Wood-Mizer approved grinding oil. Filter the oil to remove metal shavings before reusing. Maintenance...

  • Page 38: Bms200/Bms250 Maintenance & Troubleshooting

    BMS200/BMS250 Maintenance & Troubleshooting Sharpener Maintenance SECTION 4 BMS200/BMS250 MAINTENANCE & TROUBLESHOOTING Sharpener Maintenance Daily: Wipe the sharpener dry, remove the blade, lower the head, close the cover and  unplug the machine after each day's use. Keep clean of dirt, rust, and metal filings.

  • Page 39: Blade Sharpening Tips

    BMS200/BMS250 Maintenance & Troubleshooting Blade Sharpening Tips Blade Sharpening Tips This section covers some of the common problem areas of blade sharpening. Before removing from the saw, clean the blade by running the waterlube on the blade for 15 seconds. This will remove most of the sap buildup that would otherwise have to be scraped off when it dries.

  • Page 40: Alignment

    Alignment Sharpener Head Stop Alignment SECTION 5 ALIGNMENT Align the sharpener monthly to ensure quality performance. Also realign the sharpener as necessary (i.e., after the grinding wheel has been impacted by the index pawl). Sharpener Head Stop Alignment Adjust the distance between blade clamp and grinding wheel using the locking bolt, to avoid hitting the blade clamp with the sharpener head (when there is no blade in the clamp).

  • Page 41: Sharpener Alignment

    Alignment Sharpener Alignment Sharpener Alignment Use the provided BMS250 sharpener alignment tool as necessary to achieve accurate alignment between the blade clamp and the grinding wheel. IMPORTANT! Do not adjust the alignment tool bolts. They have been pre-calibrated at the factory to ensure accurate alignment results.
  • Page 42 Alignment Sharpener Alignment 6. Position the clamp assembly so the front clamp plate touches all three tool gauge points. Secure in position by tightening the clamp adjustment bolts. See Figure 5-4. Clamp Adjustment Bolts CBNSH09C FIG. 5-5 7. Remove the arbor nut and alignment tool. 8.

  • Page 43: Standard Operating Procedure

    LIGNMENT The Wood-Mizer CBN wheel grinders are designed to sharpen the saw blades by a full plunge grind. This means the grinding wheel is designed to have the same profile as the blade you are sharpening. A full plunge grind requires the blade to be properly aligned so the wheel lowers fully into the gullet of the blade.
  • Page 44 : BMS 250 TANDARD PERATING ROCEDURE HARPENING LIGNMENT 4. Raise/Lower blade and/or adjust push pawl with fine adjustment knob so there is a small gap between grinding wheel and blade. Fine Adjustment Knob Push Pawl 5. When sure that the grinding wheel is not touching the blade and is properly positioned, start the grinding wheel and the feed system slowly and raise blade so the grinding wheel just touches the blade.
  • Page 45 : BMS 250 TANDARD PERATING ROCEDURE HARPENING LIGNMENT 7. Raise the blade again so it touches the grinding wheel. The grinding wheel should have full contact through the gullet of the Blade. If there is still a gap, repeat steps 3 - 5 continuing to adjust the blade until full contact. Gullet NOTE: Do not allow the CBN wheel to start grinding the tip before the wheel is fully in the gullet.
  • Page 46 Properly sharpened teeth ROPERLY HARPENED EETH Importance: It is important to have a properly sharpened blade to allow the blade to cut wood as efficiently as possible. Poorly sharpened blades will result in less efficient cuts, resulting in blade friction that will cause the blade to heat up, lose tension, and result in wavy cuts.

  • Page 47: Properly Sharpened Teeth

    ROPERLY HARPENED EETH How this affects cutting performance During the cutting process, the cutting surfaces, both the face and the edge, become blunt and this means that the blade is “chewing” its way through the wood, instead of cutting, and this results in; Slower feed rates.

  • Page 48: Resharp Process

    This process gives you a sharp face and sharp edges. Washing: Cleaning and “de-burring” the blade has to be done manually or using a Wood-Mizer wash tank to ensure accurate grinding and setting.
  • Page 49 Set right The setting process creates the clearance needed for the body of the blade to be able to slide through the timber without dragging. Wood-Mizer has a range of Setters: Simple manual single tooth setters Simple manual dual tooth setters...
  • Page 50 HARP ROCESS Sharp Blade This is a sharp blade but the cutting performance will not be quite as good as a blade with a perpendicular face. Only 1/3 of cutting surface is perpendicular to the fibers. Blade will be more likely to “wander” in the cut. Perfectly Sharp Blade This is a perfectly sharpened and set blade.
  • Page 51 HARP ROCESS PTIONS ReSharp Installation - with Wash Tank Grind Wash This sequence is acceptable if the incoming blade is in good condition Wash Grind This sequence is acceptable if the incoming blade is in good condition Wash Grind Light Grind This sequence should be used if the incoming blade is in a very blunt, dull or damaged condition...
  • Page 52 HARP ROCESSES PTIONS ReSharp Installation - without Wash Tank Grind This sequence is acceptable if the incoming blade is in good condition Grind Light Grind Manual “Deburr” This sequence should be used if the incoming blade is in a very blunt, dull or damaged condition...

  • Page 53: Replacement Parts

    Poland at +48-63-2626000. From the continental U.S., call our toll-free Parts hotline at 1-800-448-7881. Have your customer number, vehicle identification number, and part numbers ready when you call. From other international locations, contact the Wood-Mizer distributor in your area  for parts.

  • Page 54: Blade Support Assembly

    REPLACEMENT PARTS Blade Support Assembly Blade Support Assembly CBNSH20 REF. DESCRIPTION ( Indicates Parts Available In Assemblies Only) PART # QTY. BLADE SUPPORT ASSEMBLY, COMPLETE 087518-1 GUIDE KIT, BLADE SUPPORT A10617 AS80doc121616 Replacement Parts...

  • Page 55: Grinder Asembly

    REPLACEMENT PARTS Grinder Asembly Grinder Asembly CBNSH22J CBNSH22H REF. DESCRIPTION ( Indicates Parts Available In Assemblies Only) PART # QTY. SHARPENER HEAD, BMS250 COMPLETE 097030 Arm, Sharpener Head Weldment 507795-1 Motor, SEKg 56-2C2/162A 230V 50Hz 089383 Motor, SEKg 56-2C2/162A 230V 60Hz UL 089383-UL Motor, SEKg 56-2C2/162A 110V 60Hz UL 093490-UL...
  • Page 56 REPLACEMENT PARTS Grinder Asembly Wheel, 9°/29° 7/8TS .220TH 5" BMS250 Grinding CBN Profile 030380 Wheel, 10°/30° 7/8" TS .250TH 5" BMS250 Grinding CBN Profile 030381 Wheel, 13°/29° 7/8TS .300TH 5" BMS250 Grinding CBN Profile 030389 Wheel, 12°/28° .656TS .200TH 5" BMS250 Grinding CBN Profile 030395 Wheel, 4°/32°...
  • Page 57 REPLACEMENT PARTS Grinder Asembly Nut, M10-8-B Nylon Hex Zinc Lock F81033-1 Bolt, M6x12-8.8 Hex Head Full Thread Zinc F81001-7 OIL GRINDING, CBN (5 liters) ACP-1E (European Market) 083559-1 OIL GRINDING, CBN (5 gallons) CE150S (US Market) 010740 Belongs to 088855 - BMS250 Decal Kit. Replacement Parts AS80doc121616...

  • Page 58: Sharpener Mounting Plate

    REPLACEMENT PARTS Sharpener Mounting Plate Sharpener Mounting Plate CESH29a REF. DESCRIPTION ( Indicates Parts Available In Assemblies Only) PART # QTY. PLATE, BMS250 AC SHARPENER MOUNTING 507777-1 ARM, BLADE MOUNTING PTD 093183-1 BOLT, M10X50MM, HEX HEAD FULL THREAD ZINC F81003-4 WASHER, 10.5 FLAT ZINC F81055-1 NUT, M10-8-B-FE...

  • Page 59: Blade Clamp Assembly

    REPLACEMENT PARTS Blade Clamp Assembly Washer, 6.4 Flat Zinc F81053-1 Nut, M6-8-B Hex Nylon Zinc Lock F81031-2 Nut, M6-8-B Hex Nylon Zinc Lock F81031-2 Plate, Sharpener Base 507782 Washer, M5, Flat Zinc f81052-1 Bolt, M5x16-8.8 Hex Head Full Thread Zinc F81000-20 Blade Clamp Assembly CESH30D...
  • Page 60 REPLACEMENT PARTS Blade Clamp Assembly REF. DESCRIPTION ( Indicates Parts Available In Assemblies Only) PART # QTY. BLADE CLAMP WITH BLADE HEIGHT ADJUSTMENT 098512 PLATE, FIXED CLAMP ZINC-PLATED 097025-1 PLATE, MOVING CLAMP ZINC-PLATED 097026-1  096864 ROLLER, 10x14 CYLINDRICAL SCREW, BLADE HEIGHT ADJUSTMENT ZINC-PLATED 096865-1 BLOCK, THREADED ZINC-PLATED 096866-1...

  • Page 61: Oil Pump/Pan, Control Box, Bms250

    REPLACEMENT PARTS Oil Pump/Pan, Control Box, BMS250 Oil Pump/Pan, Control Box, BMS250 CBNSH24D_1 REF. DESCRIPTION ( Indicates Parts Available In Assemblies Only) PART # QTY. PUMP, AUTO SHARPENER COOLANT P09836 PAN, SHARPENER OIL 088201 HANDLE, 4" W/BOLTS P08065 BOLT #8-32x3/8 F05018-5 MAGNET 50X30X15, OIL FILTER 516220...
  • Page 62 REPLACEMENT PARTS Oil Pump/Pan, Control Box, BMS250 SCREW, M6x20-10.9 Fe/Zn5 DIN-7991 F81001-17 WASHER, 6.5 FLAT ZINC F81053-11 NUT, M6-8-B HEX NYLON ZINC LOCK f81031-2 DECAL - ,,OIL" PICTOGRAM 095961 FITTING, 1/4 F.TH./1/4 F.TH.893-302-000-4 090808 STUD, WES 10/R 1/4 ELBOW 088379 DECAL, ELECTRIC POWER WARNING S10364-P3 MAGNET 100X30X15, OIL FILTER...

  • Page 63: Oil Pump/Pan, Control Box, Bms200

    REPLACEMENT PARTS Oil Pump/Pan, Control Box, BMS200 Oil Pump/Pan, Control Box, BMS200 REF. DESCRIPTION ( Indicates Parts Available In Assemblies Only) PART # QTY. PUMP, AUTO SHARPENER COOLANT P09836 PAN, SHARPENER OIL 088201 HANDLE, 4" W/BOLTS P08065 BOLT #8-32x3/8 F05018-5...
  • Page 64 REPLACEMENT PARTS Oil Pump/Pan, Control Box, BMS200 WASHER, 6.5 FLAT ZINC F81053-11 NUT, M6-8-B HEX NYLON ZINC LOCK f81031-2 FITTING, 1/4 F.TH./1/4 F.TH.893-302-000-4 090808 STUD, WES 10/R 1/4 ELBOW 088379 KIT, BMS200 DECALS 509256 DECAL, ELECTRIC POWER WARNING s10364-p3 DECAL, EYE WARNING, SMALL S12004G-1 DECAL, PICTOGRAM, "USE SAFETY GLOVES"...

  • Page 65: Cam Assembly

    REPLACEMENT PARTS Cam Assembly Cam Assembly CESH17E REF. DESCRIPTION ( Indicates Parts Available In Assemblies Only) PART # QTY. CAM & INDEX ARM DRIVE ASSEMBLY, COMPLETE 098520 HOUSING WDMT, INDEX CAM DRIVE SHAFT PTD 507790-1 BEARING, 6203-2RS 086114 SHAFT, CAM DRIVE 087366 MOTOR, 1/30HP 62RPM 12VDC 53:1 GEAR P09698-1...
  • Page 66 REPLACEMENT PARTS Cam Assembly Cam, Profile Index 5/8" - 7/8" Tooth Spacing 010741  Cam, Profile Index 1/2" - 3/4" Tooth Spacing 060091  WASHER, 8.4 FLAT ZINC F81054-1 NUT, M8-8-B HEX NYLON ZINC LOCK F81032-2 REPAIR KIT, SHARPENER INDEXER 097462 BEARING, 608-2RS ROLLER 086197...

  • Page 67: Cover Assembly

    5/8" - 7/8" tooth spacing and Cam 060093 for blades with 1/2" - 3/4" tooth spacing available separately. Cams for US market only. Cover Assembly CBNSH25B REF. DESCRIPTION ( Indicates Parts Available In Assemblies Only) PART # QTY. SHARPENER COVER, COMPLETE (not in BMS200 Version) 088302 Cover Weldment 088254-1 Replacement Parts AS80doc121616 7-15...
  • Page 68 REPLACEMENT PARTS Cover Assembly Handle w/Bolts P08065 Pipe, Fume Exhaust Connection 087974-1 Bolt, M6x16 8.8 Hex Head Full Thread Zinc F81001-15 Washer, 6.4 Flat Zinc F81053-1 Nut, M6 –8 Hex Zinc F81031-1 DECAL, GENERAL WARNING 086362 DECAL, EYE WARNING, SMALL S12004G-1 DECAL , CLOSE ALL GUARDS BEFORE OPERATING 099220...

  • Page 69: Alignment Tool&Blade Profiletemplate

    REPLACEMENT PARTS Alignment tool&Blade ProfileTemplate 7.10 Alignment Tool&Blade ProfileTemplate REF. DESCRIPTION ( Indicates Parts Available In Assemblies Only) PART # QTY. ALIGNMENT TOOL, SHARPENER 088382 TEMPLATE, BLADE PROFILE 514846-1 Replacement Parts AS80doc121616 7-17...
  • Page 70 EC declaration of conformity according to EC Machinery Directive 2006/42/EC, Annex II, 1.A We herewith declare, Wood-Mizer Industries sp. z o.o. 114 Nagórna street, 62-600 Ko o; Poland. That the following described machine in our delivered version complies with the appropriate basic safety and health requirements of the EC Machinery Directive 2006/42/EC based on its design and type, as brought into circulation by us.

This manual is also suitable for:

Bms250

Table of Contents