Philips AJ3138 User Manual

Philips AJ3138 User Manual

Philips clock radio user manual
Hide thumbs Also See for AJ3138:

Advertisement

Register your product and get support at
AJ3138
User manual
EN

Advertisement

Table of Contents
loading

Summary of Contents for Philips AJ3138

  • Page 1 Register your product and get support at AJ3138 User manual...
  • Page 2 Important Safety Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  • Page 3 Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
  • Page 4 This product complies with the radio interference requirements of the European Community. Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
  • Page 5 Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
  • Page 6: Your Clock Radio

    Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten. For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet. Your clock radio Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this clock radio, you can: •...
  • Page 7: Overview Of The Main Unit

    Overview of the main unit volume • Adjust volume. • Built-in microphone. repeat alarm/brightness control • Repeat the alarm. • Adjust the display brightness. tuning • Tune to a radio station. Display panel radio • Turn on/off the radio.
  • Page 8 Battery compartment Antenna (Inside the battery compartment) DC IN jack set/scan • Set the clock. • Scan radio stations. • Program radio stations. • Tune to a radio station. • Select a preset radio station. • Adjust time. • Select time format. •...
  • Page 9: Get Started

    Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No.
  • Page 10: Connect Power

    • When the unit is powered by battery, the screen lights up for 5 seconds after any operation. Connect power Caution • Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the apparatus. •...
  • Page 11: Set Time And Date

    Set time and date In clock mode, press set/scan. The hour digits begin to blink. » Press +/- to set hour. Press set/scan to confirm. Repeat steps 2-3 to set the minute. Repeat steps 2-3 to select 12 hour or 24 hour format. Repeat steps 2-3 to set the year.
  • Page 12: Program Radio Stations Automatically

    Program radio stations automatically Note • You can program a maximum of 20 preset radio stations. Press radio repeatedly to turn on the radio. Press and hold set/scan for 2 seconds. All available stations are programmed in the order of waveband »...
  • Page 13: Select A Preset Radio Station

    • To overwrite a programmed station, program another station in its place. Select a preset radio station Press radio to turn on radio. Press +/- to select a radio station. Set the alarm timer You can set two separate alarms. For the alarm tone, you can select the buzz, the FM radio, or a piece of recorded sound.
  • Page 14: Turn On/Off The Alarm Timer

    • You can also press and hold • The gentle wake up function is designed for buzzer source only. Turn on/off the alarm timer Note • Ensure that you already set the alarms successfully. Press repeatedly to turn on or off the alarm timer. If the alarm timer is turned on, »...
  • Page 15: View The Alarm Settings

    Press Other features Set the sleep timer You can set the clock radio to turn off automatically after a certain period of time. Press sleeprepeatedly to select time (in minutes). The apparatus turns off automatically after the set period of time.
  • Page 16: Adjust The Volume Level

    Record a piece of sound Note • You can record for a maximum of 8 seconds. Press and hold rec/play during the whole process of recording. REC] is displayed. » When the sound is recorded, » • Keep the sound source close to •...
  • Page 17 To deactivate the backlight blinking function Press and hold repeat alarm/brightness control for 5 seconds again. Change the decorative ring and knobs Note • You can change the decorative ring and knobs with the supplied ring and knobs. To change the decorative ring Rotate the ring counter-clockwise.
  • Page 18 Rotate the ring clockwise. The ring is installed. » To change the knobs Pull the knobs directly out of the socket. Plug the knobs to be installed into the sockets.
  • Page 19: Product Information

    Note • Product information is subject to change without prior notice. Specifications Tuner (FM) Tuning Range Tuning grid Sensitivity - Mono, 26dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio 87.5 - 108MHz 50KHz <22 dBf >28dBf <3% >50dB...
  • Page 20: Troubleshooting

    If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/support). When you contact Philips, ensure that your apparatus is nearby and the model number and serial number are available. No power - AC: Model: AD39673 Input: 220 - 230V~ ,50Hz, 0.02A ,...
  • Page 21 • Ensure that the Mains cord is connected securely. • Ensure that there is power at the AC Mains. • Ensure that the batteries are inserted correctly. No sound • Adjust the volume. No response from the unit • Disconnect and reconnect the AC power plug, then turn on the unit again.
  • Page 22 En Chile Importado por : Philips Chilena S.A. Av. Sta. Maria, 0760 - Providencia - Santiago, RUT 90.761.000-4 © 2010 Koninklijke Philips Electronics N.V. All rights reserved. AJ3138_12_UM_V3.0...

This manual is also suitable for:

Aj3138/12

Table of Contents