Johnson Controls YORK YK MaxE Operation Manual page 55

Time Remaining
While the VGD is in the Stall Waiting State, displays the
time remaining in the "Probe Wait Time" interval (value
programmed as the Probe Wait Time Setpoint).
Diffuser gap Control Mode
Indicates whether the VGD is under manual or automatic
control.
prograMMaBLe
[VGD] Open (Manual)
This key puts the VGD in manual mode and sends an
open command to the VGD.
[VGD] Close (Manual)
This key puts the VGD in manual mode and sends a
close command to the VGD.
[VGD] Hold (Manual)
This key puts the VGD in manual mode and sends a
hold command to the VGD.
JOHNSON CONTROLS
NaVigatioN
Home
Access Level Required: VIEW
Causes an instant return to the Home Screen.
Compressor
Access Level Required: VIEW
Causes an instant return to the compressor Screen.
VgD Setpoints
Access Level Required: SERVICE
Move to the subscreen that allows programming of
the Variable Geometry Diffuser setpoints.
FORM 160.54-O1
2
55