Advertisement
Quick Links
UltraChange
™ Lawn Care Cartridge Range for
Stirling 43 and Stirling 51 Cylinder Lawnmowers
OPERATOR AND PARTS MANUAL
Original instructions: English version
Allett Limited, Regal House, Airfield Industrial Estate, Hixon, Stafford, ST18 0PF, United Kingdom
Tel: +44 (0) 1889 271503
sales@allett.co.uk
www.allett.co.uk
For Allett spare parts tel: +44 (0) 1889 27209
F016J13758-A ISSUE 28-01-22 SE
1
Advertisement
Related Manuals for Allett UltraChange Series
Summary of Contents for Allett UltraChange Series
- Page 1 ™ Lawn Care Cartridge Range for Stirling 43 and Stirling 51 Cylinder Lawnmowers OPERATOR AND PARTS MANUAL Original instructions: English version Allett Limited, Regal House, Airfield Industrial Estate, Hixon, Stafford, ST18 0PF, United Kingdom Tel: +44 (0) 1889 271503 sales@allett.co.uk www.allett.co.uk...
- Page 2 READ THIS MANUAL BEFORE USING AN ALLETT STIRLING 43 OR 51 CYLINDER MOWER YOUR SAFETY IS INVOLVED IT IS ESSENTIAL THAT OPERATORS STUDY THIS DOCUMENT FOR THEIR OWN SAFETY F016J13758-A ISSUE 28-01-22 SE...
- Page 3 AERATOR CARTRIDGE LAWN BRUSH CARTRIDGE DETHATCHER CARTRIDGE VERTICUTTER CARTRIDGE SCARIFIER CARTRIDGE F016J13758-A ISSUE 28-01-22 SE...
- Page 4 F016J13758-A ISSUE 28-01-22 SE...
-
Page 5: Delivered Items
For best results, the lawn care cartridges need precise control of the working depth. It is recommended that you only use your cartridge in an Allett Stirling mower fitted with a HiteRite™ height of cut control. See A-1. Using any of the cartridges covered in this manual in a dial adjustment model with 5 pre-set heights will invalidate the mowers guarantee. -
Page 6: Safety Decals
SAFETY DECALS Cartridge securing lever lock Height of cut / depth of cultivation Beware of thrown or flying objects Keep bystanders at a safe distance from machine General hazard safety alert Sharp blade(s). Beware of severing toes or fingers. Sharp blade(s). Beware of severing toes or fingers. Stay clear of rotating parts F016J13758-A ISSUE 28-01-22 SE... - Page 7 CHANGING A UC LAWN CARE CARTRIDGE To remove a cartridge: Remove the grass bag and battery Pivot the two cartridge clamps (C1) upwards away from the machine Press the release lever on the cartridge securing lever (B1), then pivot it towards the rear of the machine until the latch pin locates in upper slot.
- Page 8 When engaging drive to each lawn care cartridge, tilt the mower back slightly so the blades are just clear of the ground. This will reduce wear on the belts and sprockets. When tilting the mower back stand in the operating position at the rear of the machine and hold the handlebars with both hands.
- Page 9 Regular (up to weekly) and shallow in-season verticutting will prevent excessive thatch build up. Scarifier Cartridge The Scarifier cartridge is Allett’s most popular cultivation cartridge and is designed to remove thatch, surface debris and dead moss. This cartridge also helps lift lateral growth upright before mowing.
-
Page 10: Lawn Care Calendar
LAWN CARE CALENDAR Aerator Lawn Brush Dethatcher Verticutter Scarifier January Remove leaves Remove thatch Aerate to improve layer before Break up and February surface drainage increasing plant disperse worm casts and Oxygen uptake density with new lawn seed Remove thatch Remove leaves and Aerate to improve layer before... - Page 11 UC CUTTING CYLINDER / REEL – WEARING PARTS DIAGRAM NOTE: CARTRIDGE PULLEY CONTAINS A LEFT-HANDED THREAD ITEM NO. 43 CYL PART NUMBER 51 CYL PART NUMBER DESCRIPTION F016A58820 F016A58821 CYLINDER / REEL F016J11745 F016J11750 BOTTOM BLADE / BED KNIFE ASSEMBLY F016A58741 F016A58741 BALL BEARING...
- Page 12 UC ACCESSORY CARTRIDGE PARTS DIAGRAM – WEARING PARTS ITEM NO. PART NUMBER DESCRIPTION QTY PER 43 UC CART QTY PER 51 UC CART F016J10246 AERATOR BLADE F016J10245 DETHATCHER BLADE F016J10243 VERTICUTTER BLADE F016T47920 SPRING TINE F016J13758-A ISSUE 28-01-22 SE...
- Page 13 2006/42/EC and have been designed and manufactured to the following standards and their annexes: BS EN 60335-2-77:2010, BS EN ISO 5395-1:2013+A2:2018 and BS EN ISO 5395-2:2013+A2:2017 Technical file compiler: Allett Ltd, Regal House, ST18 0PF I hereby declare that the equipment named above has been tested and found to comply with the relevant sections of the above referenced specifications.
- Page 14 You must contact the place of purchase and report the problem to them. You need to have your proof of purchase and guarantee. If the dealer cannot assist in finding a solution to the problem reported, please contact Allett to report any unresolved issues.
Need help?
Do you have a question about the UltraChange Series and is the answer not in the manual?
Questions and answers