Assembling Your Steam And Scrub Mop - Shark S7001ANZ Series Instructions Manual

1
Insert the mop handle into the steam
mop body until it clicks into place.
3 To open the water tank, pull the lid down.

ASSEMBLING YOUR STEAM AND SCRUB MOP

3
AU S s h a r kc l e a n . c o m . a u
1
2 To attach the Dirt Grip™ or Dusting pads,
place BOTH pads flat on the floor with
the plastic rings facing up. Align the
indentation on the rotating discs on the
bottom of the nozzle with the plastic
rings on the pads, then gently lower the
nozzle onto the pads, pressing until the
pads are secured.
4 Use the filling flask to pour distilled water
into the tank. Make sure to not exceed the
Max Fill line on the flask. When finished,
close the tank lid firmly.
NOTE: Max capacity of the water tank is 320ml
N Z s h a r kc l e a n . c o . n z
2
4
6