Victor 70D Manual page 14

automatic range can such bottoms as "RANGE"."MAX/MIN"."HOLD" play their function controlling.
3． Touch the measuring point with the meter measuring pen and connect it in parallel to the circuit being
tested, and the polarity of the red meter pen wire and the tested voltage
value are spontaneously displayed on the display.
Caution:
a) Voltages over DC1000V 或 AC750V cannot be tested. The
manual range mode is as shown in the LCD.
"OL"， In case "OL" is displayed for manual range mode, it
indicated the range has been exceeded and it is necessary
to select higher range mode to complete this measurement.
b)At automatic identification and measurement, the AC threshold voltage is 0.5V; in case the voltage to be
measured is smaller than 0.5V;trigger the "SELECT" button to select automatic ACV measurement. In case the
AC mV mode is used, please select the "RANGE" button.
Range Accuracy Resolution
13/21
VICTOR70D Digital multimete
× Ô ¶ ¯ Ê ¶ ± ð ½ »
Ö ± Á ÷ µ ç Ñ ¹ ¼ ° µ ç
³ ¡ Ç ¿ È õ ° ´ ¼ ü