Page 1: Digital Camera
Digital Camera EX-S880 User’s Guide Thank you for purchasing this CASIO product. • Before using it, be sure to read the precautions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future reference. • For the most up-to-date information about this product, visit the official EXILIM Website at http://www.exilim.com/...
Page 2: Unpacking
UNPACKING As you unpack your camera, check to make sure that all items shown below are included. If anything is missing, contact your original retailer. Digital Camera Special AC Adaptor (AD-C52G)/AC Power Cord * USB Cable Rechargeable Lithium Ion Battery...
Page 3: Table Of Contents
CONTENTS UNPACKING QUICK START BASICS First, charge the battery ..... . 9 Configuring Display Language, Date, and Time Settings ......11 Using a Memory Card .
Page 4 SHOOTING A SNAPSHOT Holding the Camera Correctly ....62 Shooting a Snapshot......63 ■...
Page 5 ADVANCED SETTINGS Changing the Focus Mode ....121 ■ Using Auto Focus ■ Using Macro Focus ■ Using Fixed Focus (Pan Focus) ■ Using Infinity Focus ■...
Page 6 EDITING IMAGES Resizing a Snapshot ..... . . 169 Cropping a Snapshot ..... . 170 Keystone Correction .
Page 7 OTHER SETTINGS Configuring Camera Sound Settings ..198 Turning the Startup Screen On or Off ..200 Specifying the File Name Serial Number Generation Rule .
Page 8 TRANSFERRING DOCUMENTS TO YOUR CAMERA (DATA STORAGE) 257 Transferring Documents to the Camera ..257 ■ Transferring documents from a computer running Windows ■ Transferring documents from a Macintosh Viewing a Transferred Document on the Camera .
Page 9: Quick Start Basics
QUICK START BASICS First, charge the battery ■ Loading the Battery into the Camera Open the battery co ver. While pressing lightly on the cover, slide it in the direction indicated by the arrow to open. Load the battery into the camera. Close the battery cover.
Page 10 ■ Using the USB Cradle to Charge Plug the USB cradle into a household power outlet. AC adaptor AC power cord Place the camera onto the USB cradle. [CHARGE] lamp Red: Charging Green: Charged (Full) • It takes about two hours to achieve a full charge.
Page 11: Configuring Display Language, Date, And Time Settings
Configuring Display Language, Date, and Time Settings [ON/OFF] (Power) [BS] The settings on this page are required the first time you turn on the camera after purchasing it. • If you make a mistake when configuring the language, date, and time settings, you can change the settings (pages 202, 206).
Page 12 Use [ ] and [ ] to select the date format and then press [SET]. Example: December 19, 2007 To display the date like this: 07/12/19 19/12/07 12/19/07 Set the date and the time. Use [ ] and [ ] to select the setting you want (year, month, day, hour, minute) and then use [ ] and [ ] to change the setting. To switch between 12-hour and 24-hour format, press [BS].
Page 13: Using A Memory Card
Using a Memory Card ■ Loading a Memory Card into the Camera When a memory card is loaded, the camera stores images you shoot on the card. NOTE • Though the camera has built-in memory, using a memory card provides additional capacity you can use to store more images, high-quality and large-size images, and longer movies.
Page 14 ■ Formatting a Memory Card Before you can use a memory card with your camera, you must format it. IMPORTANT! • Formatting a memory card that already has snapshots or other files on it, will delete its contents. Normally you do not need to format a memory card again.
Page 15: Shooting A Snapshot
Shooting a Snapshot Auto icon Operation Lamp Focus Frame Monitor Screen Press [ This enters the REC mode and displays “ on the monitor screen. Point the camera at the subject. ] (REC) While taking care to keep the camera still, half- press the shutter button.
Page 16 Snapshot Image Size and Image Quality Your camera lets you select from among various image size and quality settings. Note that image size and quality settings affect how many images can be stored in memory. • You can change the image size and quality settings as required to shoot a smaller or lower-resolution image for attachment to an e-mail message, for publishing on a website, etc.
Page 17: Viewing Snapshots
■ Fully pressing the shutter button without waiting for Auto Focus Fully pressing the shutter button without waiting for Auto Focus to operate will record using Quick Shutter (page 128). Quick Shutter lets you capture exactly the moment you want. •...
Page 18: Shooting A Movie
Shooting a Movie Movie Icon Remaining Recording Time Recording Time Movie Recording Screen Press [ ] to enter the REC mode. Press [ ] to start shooting the movie. “ ” (movie icon) remains on the monitor screen while movie recording is in progress. •...
Page 19: Viewing A Movie
Viewing a Movie The film-like frame that appears on the monitor screen indicates that this is an image from a movie. “ ” Movie icon [ ] [ ] Press [ Use [ ] and [ ] to select the movie you want to play.
Page 20: Deleting A File
Deleting a File You can use the following procedure to delete files you have transferred to your computer’s hard disk, images you have printed, or files you simply no longer need. This frees up memory for recording more images. ] (PLAY) [ ] [ ] [ ] ( Press [...
Page 21: Introduction
INTRODUCTION Features ■ BEST SHOT for beautiful shots simply by selecting a sample image built into the camera Simply select the scene that is Example: Select for beautiful similar to what you want to shoot (Night Scene Portrait, Flower, etc.), for instant camera setups. A dedicated [BS] button gives you direct access to the BEST SHOT library of sample scenes.
Page 22: Read This First
(website data, maps, etc.) to your camera. • Bundled CASIO DATA TRANSPORT software lets you transfer documents from your computer to the camera and take it along with you (page 257).
Page 23 Note that CASIO COMPUTER CO., LTD. shall not be held liable for any use of this product that infringes on the copyrights of others or that violates copyright laws.
Page 24 • Photo Loader with HOT ALBUM was developed based on HOT ALBUM, which is copyrighted by HOTALBUMcom, Inc., and Photo Loader, which is copyrighted by CASIO COMPUTER CO., LTD. All copyrights and other rights revert to original copyright holders. • All other company or product names mentioned herein are registered trademarks or trademarks of their respective companies.
Page 25 CASIO COMPUTER CO., LTD. is forbidden under copyright laws. • CASIO COMPUTER CO., LTD. shall not be held liable for any damages or loss suffered by you or any third party due to the use or malfunction of this product.
Page 26: Precautions During Use
Precautions during Use ■ Take test shots before shooting the final shot. • Before shooting your final image, shoot a test shot to ensure that the camera is recording correctly. ■ Avoid Use While In Motion • Never use the camera to record or play back images while operating an automobile or other vehicle, or while walking.
Page 27: Display Panel
Immediately perform the following steps whenever any of the above symptoms are present. 1. Turn off the camera. 2. Remove the battery from the camera, taking care to protect yourself against burn injury. 3. Contact your dealer or nearest CASIO authorized service center. INTRODUCTION...
Page 28 1. Turn off the camera. 2. Remove the battery from the camera. 3. Contact your dealer or nearest CASIO authorized service center. ■ Dropping and Rough Treatment •...
Page 29: Memory Protection
• Never try to take the camera apart or modify it in any way. Doing so creates the risk of electric shock, burn injury, and other personal injury. Be sure to leave all internal inspection, maintenance, and repair up to your dealer or nearest CASIO authorized service center. ■...
Page 30: Rechargeable Battery
Doing so can damage the battery, and cause deterioration of its performance and loss of service life. • This battery is intended for use with a CASIO Digital Camera only. Use with any other device creates the risk of the battery damage, or deterioration of battery performance and service life.
Page 31 – Do not twist or pull on the power cord. – Should the power cord or plug ever become damaged, contact your dealer or nearest CASIO authorized service center. • Never touch the AC adaptor while your hands are wet. Doing so creates the risk of electric shock.
Page 32 • Misuse of the AC adaptor creates the risk of fire and electric shock. Make sure you observe the following precautions when using the AC adaptor. – Never locate the power cord near a stove or other heating device. – When unplugging from the wall outlet, grasp the plug on the AC adaptor power cord.
Page 33: Data Error Precautions
■ Data Error Precautions • Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in camera memory. – While the camera is performing an operation, removing the...
Page 34: Operating Environment
■ Operating Environment • The operating temperature range of the camera is 0°C to 40°C (32°F to 104°F). • Do not place the camera in any of the following locations. – In an area exposed to direct sunlight, or large amounts of moisture or dust –...
Page 35: Caring For Your Camera
■ Caring for your camera • Fingerprints, dirt, and other foreign matter on the lens surface can interfere with proper operation of the camera. Avoid touching the lens surface. To clean the lens surface, use a blower to blow off dust or foreign matter and then wipe with a soft, dry cloth.
Page 36: Getting Ready
GETTING READY Charging the Battery Your camera is powered by a rechargeable lithium ion battery (NP-20). IMPORTANT! • Use of any type of battery other than NP-20 is not supported. To load the battery Open the battery cover. While pressing the battery cover, slide it in the direction indicated by the arrow.
Page 37: To Charge The Battery
Close the battery cover. Swing the battery cover closed, and then slide it securely into place as you press it against the camera. The battery is not fully charged when you use the camera for the first time after purchasing it. Use the following procedure to charge it.
Page 38 With the camera positioned so the monitor screen is facing towards you as shown in the illustration, place it onto the USB cradle. The [CHARGE] lamp lights red and charging starts. • It takes about two hours to achieve a full charge. Actual charging time depends on current battery capacity, remaining power, and charging conditions.
Page 39 If an error still continues to occur after you perform the above steps, it could mean that the battery is faulty. Contact your nearest CASIO authorized service center. IMPORTANT! • Use only the bundled USB cradle or the separately available special charger unit (BC-11L) to charge the special rechargeable lithium ion battery (NP-20).
Page 40 ■ Battery Life and Number of Images between Charges See page 291 for details. ■ Battery Power Conservation Tips • When you do not need to use the flash, select “ for the flash setting (page 75). • Enable the Auto Power Off and the Sleep features to protect against wasting battery power when you forget to turn off the camera (page 45).
Page 41: Replacing The Battery
IMPORTANT! • Due to differences in the power requirements of each mode, the battery indicator may show a lower level in the PLAY mode than what it shows in a REC mode. This is normal, and does not indicate malfunction. •...
Page 42: Battery Precautions
Battery Precautions ■ Precautions during Use • Operation provided by a battery under cold conditions is always less than operation under normal temperatures. This is due to the characteristics of the battery, not the camera. • Charge the battery in an area where the temperature is within the range of 10°C to 35°C (50°F to 95°F).
Page 43: Using The Camera In Another Country
Using the Camera in another Country Note the following precautions. • The bundled AC adaptor is designed for operation with any power supply in the range of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the power cord plug depends on each country or geographic area.
Page 44: Turning Power Off
IMPORTANT! • Pressing [ON/OFF] or [ ] (REC) to turn on power also causes the lens to extend. Take care there is nothing pressing against or hitting the lens. Holding the lens with your hand so it cannot extend creates the risk of malfunction.
Page 45 ■ Battery Power Conservation Features This camera is equipped with a sleep function and auto power off function to conserve battery power. You can configure these settings in the REC mode as described below. Feature Description Name The monitor screen turns off (goes into a sleep state) if no operation is performed for a preset amount of Sleep...
Page 46: Using A Memory Card
NOTE • When both sleep and Auto Power Off have the same time settings, Auto Power Off takes priority. • Sleep and Auto Power Off are disabled under the following conditions. – When there is a connection between the camera and computer or other device via the USB cradle –...
Page 47: Supported Memory Cards
Supported Memory Cards Your camera supports use of the following types of memory cards. SD Memory Card SDHC Memory Card MMC (MultiMediaCard) MMCplus (MultiMediaCardplus) • For information about memory card capacity, see page 287. Memory Used for Storage Images recorded while a memory card is loaded are saved to the memory card.
Page 48: Loading A Memory Card Into The Camera
• Electrostatic charge, electrical noise, and other phenomena can cause data to become corrupted or even lost. Make sure that you always back up important data on other media (CD-R, CD-RW, MO disk, hard disk, etc.). Loading a Memory Card into the Camera IMPORTANT! •...
Page 49: Replacing The Memory Card
Load a memory card into the camera. Positioning the memory card so its front is facing upwards (towards the monitor screen side of the camera), slide it into the card slot all the way in until you hear it click securely into place.
Page 50: Formatting A Memory Card
• Should water or any foreign object ever get into the card slot, immediately turn off the camera, remove the battery, and contact your retailer or nearest CASIO authorized service center. • Never remove a card from the camera while the operation lamp is flashing green.
Page 51: Memory Card Precautions
Load the memory card you want to format into the camera. Turn on the camera and press [MENU]. On the “Set Up” tab, select “Format” and then press [ ]. Use [ ] and [ ] to select “Format” and then press [SET] to start formatting.
Page 52: Using On-Screen Menus
Using On-screen Menus The following are menu operations you will need to use to configure camera settings. Take a few moments to become familiar with them. • See “Menu Reference” on page 273 for information about menu contents. • You also can use the Operation Panel (page 55) to configure some of the settings that appear on the menu screen.
Page 53: Configuring Monitor Screen Settings
Use [ ] and [ ] to select the setting you want. Apply the setting. • Pressing [SET] applies the selected setting and exits the menu screen. • Pressing [ ] instead of [SET] applies the selected setting and returns to the menu screen. You can then continue configuring other settings, if you want.
Page 54: Selecting A Screen Layout (Layout)
The following is the procedure for menu operations in the REC mode. In the REC mode, press [DISP]. This will display the display menu screen. Use [ ] and [ ] to select the setting you want. Use [ ] and [ ] to select the setting you want. •...
Page 55 Layout Type Description With this option, the image being composed completely fills the monitor Panel: Off screen. This setting is best when you want to display the subject on a large 16:9 aspect ratio monitor screen (page 67). Icons are superimposed on the displayed image.
Page 56 *1 Image quality cannot be changed using Panel (Operation Panel). *2 You can select date or time display. *3 You can use the “Date Style” to select either month/day or day/month for date display (page 203). The time display format is always 24 hours, regardless of the current settings of the camera’s “Adjust”...
Page 57: Turning Display Information On And Off (Info.)
■ PLAY Mode Screen Layout The PLAY mode screen layout settings let you select how display images are shown on the monitor screen. Layout Description Type With this setting, 100% of the display image is always visible. With some aspect ratios, black bands may appear above and below, or to the left and right of the image.
Page 58: Adjusting Monitor Screen Brightness (Brightness)
Display Information Description Setting Turns off display of all information. Hide Adjusting Monitor Screen Brightness (Brightness) You can use the “Brightness” setting to adjust the brightness of the monitor screen. This setting is the same in the REC mode and PLAY mode. Brightness Description Setting...
Page 59: Adjusting Monitor Screen Image Quality (Type)
Brightness Description Setting Normal monitor screen brightness for indoor use, etc. Low monitor screen brightness for nighttime use, –1 indoor use under dark conditions, etc. Adjusting Monitor Screen Image Quality (Type) You can use the “Type” setting to adjust the quality of the monitor screen image.
Page 60: If You Lose Your Way
Quality Setting Description This setting provides a clearer screen image when shooting under dark conditions, and Night comes in handy when recording at night with a tripod. Consumes slightly less power than the other settings, and extends battery life. Note that Power Saving power saving is disabled when “Auto”...
Page 61 PLAY mode To return to the normal playback Current Screen screen Menu screen [MENU] or [ Display Menu screen [DISP] or [ REC mode screen Press [ Press [ ]. You could also select Delete screen “Cancel” and then press [SET]. GETTING READY...
Page 62: Shooting A Snapshot
SHOOTING A SNAPSHOT Holding the Camera Correctly Holding the camera with one hand can result in accidental hand movement. Hold the camera securely with both hands when shooting snapshots. • To protect against accidentally dropping the camera, attach the wrist strap and make sure it is around your fingers or wrist while you are operating the camera.
Page 63: Shooting A Snapshot
NOTE • Good-looking images are impossible if you move the camera when you press the shutter button or while the Auto Focus operation is being performed. Holding the camera correctly, carefully press the shutter button and take care that you do not move the camera as the shutter releases.
Page 64 Focus the image. While the focus frame is aligned with the subject, half-press the shutter button. Auto Focus will focus the image automatically, and the focus frame and operation lamp will turn green. The aperture, shutter speed, and ISO sensitivity also will be set automatically.
Page 65 NOTE • The aperture value indicates the size of the opening that lets light into the camera. A larger aperture value indicates a smaller opening. The camera adjusts this setting automatically. • Shutter speed indicates the amount of time that light is allowed into the camera.
Page 66: Specifying Image Size
Specifying Image Size A digital camera image is a collection of small dots (pixels). The size of an image indicates how many pixels it contains, and is expressed as horizontal pixels × vertical pixels. The initial factory default image size setting is 8M (3264 ×...
Page 67 NOTE • The following information changes on the display during the image size selection operation. – Image size in pixels (1600 × 1200, etc.) – Optimum print paper size – Remaining snapshot memory capacity Image Size (Pixels) Print Paper Size 3264 ×...
Page 68: Specifying Image Quality
Specifying Image Quality Your camera lets you select “Fine” (maximum image quality), “Normal”, or “Economy” (maximum memory economy) for the image quality setting. The initial setting is “Normal”. Select “Fine” if you want to give priority to image quality, or “Economy” to give priority to the number of images you can store in memory.
Page 69: Turning Off The Af Assist Lamp
Turning Off the AF Assist Lamp The AF assist lamp emits light that helps the camera focus when you half-press the shutter button under dark lighting conditions. The AF assist lamp does not light when lighting is bright. The initial factory default AF Assist/Self-timer Lamp setting is AF assist lamp on.
Page 70: Snapshot Shooting Precautions
Snapshot Shooting Precautions ■ Operation • While the operation lamp is flashing green, never open the battery cover or place the camera onto or remove it from the USB cradle. Doing so can result in incorrect storage of the image you just shot, damage to other images stored in memory, malfunction of the camera, etc.
Page 71: Auto Focus Restrictions
Auto Focus Restrictions • Proper focus may not be possible when shooting the following types of subjects. – Solid color wall or other very low contrast subject – Strongly back lit subject – Very shiny subject – Blinds or other subject with a repeating horizontal pattern –...
Page 72 Press the zoom button to change the zoom factor. Press this side of the To do this: zoom button: Enlarge the subject and narrow the range Reduce the size of the subject and broaden the range – For more information, see “Optical Zoom and Digital Zoom Switch Point”...
Page 73: Optical Zoom And Digital Zoom Switch Point
■ Optical Zoom and Digital Zoom Switch Point If you hold down the [ ] side of the zoom button in step 2 of the above procedure, the zoom operation will stop when the optical zoom factor reaches its maximum. Momentarily releasing the zoom button and then holding down its [ to digital zoom, which you can use to set an even higher zoom factor.
Page 74: In The Rec Mode, Press [Menu]
• The image deterioration point depends on the image size (page 66). The smaller the image size, the higher the zoom factor you can use before reaching the image deterioration point. • Though digital zoom generally causes a deterioration of image quality, some digital zoom without image deterioration is possible with image sizes of “6M (2816 ×...
Page 75: Using Flash
Using Flash Perform the following steps to select the flash mode you want to use. Flash Setting Description Auto Flash Flash fires automatically in accordance with exposure (amount of light and brightness) conditions. • Initial factory default setting. Flash Off Flash does not fire.
Page 76 NOTE • When operation panel setting is turned off (page 54), you can cycle through the flash modes by pressing [ ] IMPORTANT! • When using flash, take Flash care that the flash window is not blocked by your fingers or the camera strap.
Page 77 ■ Checking the Flash Mode The current flash mode is indicated on the monitor screen and by the operation lamp when you half-press the shutter button. Operation Lamp Flashes orange while the flash is charging. “ ” indicates flash will fire. •...
Page 78: Using Flash Assist
■ Using Flash Assist The subject in an image will look too dark if flash intensity is not enough to reach a subject that is too far away. When this happens, you can use flash assist to supplement the brightness of the subject so it appears as if flash illumination was sufficient.
Page 79: Flash Precautions
■ Flash Precautions • The desired effect may not be obtained when the subject is too far away or too close. • Flash charging time depends on operating conditions (battery condition, ambient temperature, etc.) With a fully charged battery, it takes anywhere from a few seconds to 7 seconds. •...
Page 80 In the REC mode, press [SET]. Use [ ] and [ ] to select the third option from the top in the operation panel (Self-timer). Use [ ] and [ ] to select the self-timer type and then press [SET]. This causes an indicator identifying the selected self- timer type to appear on the...
Page 81: Using Continuous Shutter
NOTE • The indicator “1sec” appears on the monitor screen between Triple Self-timer shots. How long it takes for the camera to get ready to shoot again after it shoots an image depends on the image size and quality settings, whether or not a memory card is loaded in the camera, and the flash charge condition.
Page 82: Selecting The Continuous Shutter Mode
Continuous Description Shutter Mode Zoom Cont. In this mode, you select an area on the (Zoom Continuous monitor screen with a selection Shutter) boundary. Then when you press the shutter button, the camera records the monitor screen image and the area enclosed in the selection boundary, digitally zoomed to twice its normal size.
Page 83: Recording With Zoom Continuous Shutter
Recording with Zoom Continuous Shutter Use [ ], [ ], [ ], and [ ] to move the selection boundary around the image of the subject on the left side of the monitor screen until it is located at the part you want to enlarge, and then press [SET].
Page 84: Continuous Shutter Precautions
Continuous Shutter Precautions • Starting a continuous shutter operation causes the exposure and focus settings to be fixed at the levels for the first image. The same settings are applied to all subsequent images. • Continuous shutter cannot be used in combination with any of the following features.
Page 85: Adding Audio To A Snapshot
Adding Audio to a Snapshot You can add an audio recording to snapshots, if you want. Use this feature to add a verbal explanation or a description of the mood to a snapshot, or to capture the sounds of the people in the snapshot.
Page 86 Playing Back Snapshot Audio Audio snapshots in the PLAY mode are indicated by the “ icon. Press [SET] while an audio snapshot is displayed to play back its audio. • For information about the playback operation, see page 152. IMPORTANT! •...
Page 87: Face Recognition
Face Recognition The face recognition feature gives priority to the human faces in an image for focus and brightness settings. The following describes to two available face recognition modes. Face Recognition Description Mode Detects human faces and adjusts focus and brightness accordingly.
Page 88: Using The Family First Mode To Give Priority To Particular Faces
Point the camera at the subjects. The camera will detect the faces of any people in the image. The detected faces all will be bounded by frames after detection is complete. Half-press the shutter button. The focus frame of the face that is focused becomes green. When you are ready to shoot, press the shutter button the rest of the way.
Page 89 When the message “Face recognition successful!” appears, use [ ] and [ ] to select “Save” and then press [SET]. This will record the face data and return to the recording screen. • To re-record the face data, select “Cancel”. NOTE •...
Page 90 Use [ ] and [ ] to select a name, and then press [ ]. • You can select any one of 12 preset names to face data. Use [ ] and [ ] to select the priority level you want and then press [SET].
Page 91 ■ Shooting a Snapshot using Recorded and Edited Face Data After you record and edit face data, you can use it to shoot photographs. The camera will record images in accordance with the priority levels you configured for each set of face data. Enter a REC mode.
Page 92: Use And To Select The Setting You Want
Selecting the Face Detection Method (Priority) Use the following procedure to specify whether you want to give priority to faster speed or a higher number of faces during face detection. Enter a REC mode. Press [ ] ( ) once. Use [ ] and [ ] to select “...
Page 93 • Face recognition in the Family First mode may be slower than in the Normal mode because the camera needs time to determine whether the faces in the image are the same as the recorded faces. Also, compared with the Normal mode, the Family First mode will not be able to recognize faces that are far away and small.
Page 94: Shooting A Movie
SHOOTING A MOVIE Movie Image Quality Before shooting a movie, you should specify a movie image quality setting. Movie image quality is a standard that determines the detail, smoothness, and clarity of a movie during playback. Shooting with the high-quality (HQ) setting will result in better image quality, but it also shortens the amount of time you can shoot.
Page 95: Shooting A Movie
Movie File Formats Movies are recorded using H.264/AVC MOV format. Movies you shoot with your camera can be played back on a computer using QuickTime 7. Movie Size The following shows the approximate movie file size for a one- minute movie. Image Quality Approximate Size 43.3 MB...
Page 96: Movie Recording Precautions
IMPORTANT! • Spending a long time using movie recording will cause the camera to become slightly warm to the touch. This is normal and does not indicate malfunction. Shooting with BEST SHOT With BEST SHOT (page 104), you select the preset scene that is closest to the one you want to shoot, and the camera sets up for it automatically.
Page 97: Using Short Movie
• You can perform digital zoom while shooting a movie by pressing [ ]. Optical zoom is not available while shooting a movie. To use optical zoom for a movie, use [ required first and then press [ • The effects of camera movement in an image become more pronounced when you shoot close up or a large zoom factor.
Page 98 ■ Getting Ready to Shoot with Short Movie In the REC mode, press [BS]. Use [ ], [ ], [ ], and [ ] to select the “Short Movie” scene and then press [SET]. This causes “ ” to appear on the monitor screen.
Page 99 Use [ ] and [ ] to select the MOTION PRINT setting you want and then press [SET]. To do this: Select this setting: Create a snapshot with nine 9 frames movie frames, with the one recorded when [ ] is pressed in the center Create a snapshot of the 1 frame...
Page 100: Using Past Movie
To return to the REC mode After Short Movie recording is complete, the camera stands by for shooting of another Short Movie. To exit Short Movie recording, press [BS], select something other than “Short Movie” and then press [SET]. If you want to set the camera up for normal snapshot shooting, for example, select “Auto”...
Page 101 ■ Getting Ready to Shoot with Past Movie In the REC mode, press [BS]. Use [ ], [ ], [ ], and [ ] to select the “Past Movie” scene and then press [SET]. This causes “ ” to appear on the monitor screen, which indicates that Past Movie is enabled.
Page 102: Shooting A Snapshot While Shooting A Movie (Snapshot-In-Movie)
To return to the REC mode After Past Movie recording is complete, the camera stands by for shooting of another Past Movie. To exit Past Movie recording, press [BS], select something other than “Past Movie” and then press [SET]. If you want to set the camera up for normal snapshot shooting, for example, select “Auto”...
Page 103 IMPORTANT! • Shooting a snapshot while shooting a movie is not supported while any one of the following BEST SHOT scenes is selected. Short Movie, Past Movie, Business cards and documents, White board, etc., For YouTube, Voice Recording. NOTE • You can use [ ] ( ) while shooting a movie to change the flash mode.
Page 104: Using Best Shot
USING BEST SHOT With BEST SHOT, you simply select the sample scene that is like the one you are trying to shoot, and the camera sets up automatically. Even difficult backlight scenes (which result in the main subject being too dark if set up improperly) come out looking great! ■...
Page 105 Use [ ], [ ], [ ], and [ ] to move the boundary to select the scene you want to select. • Pressing [ ] or [ ] while the boundary is at the edge of the screen will scroll to the next screen of BEST SHOT scenes.
Page 106 BEST SHOT Scene Limitations • Business cards and documents, White board, etc., Old Photo, Layout, and Auto Framing. These scenes cannot be used to shoot a movie. • Short Movie, Past Movie, For YouTube These scenes cannot be used to shoot a snapshot. •...
Page 107 Displaying Detailed Information about a BEST SHOT Scene To find out more about a scene, select it with the boundary on the scene selection screen and then press the zoom button. The following are the different operations you can perform while the scene description screen is on the display.
Page 108 ■ Creating Your Own BEST SHOT Scenes You can use the procedure below to save the setups of snapshots or movies that you shot as BEST SHOT scenes. After that, you can recall a setup whenever you want to use it. In the REC mode, press [BS].
Page 109 • The following are the settings that are included in a user movie scene: Focus, EV Shift, White Balance, Color Filter, Sharpness, Saturation, Contrast • You can store up to 999 BEST SHOT user scenes. • User BEST SHOT scenes are stored in built-in memory (page 253) in the SCENE folder (snapshots) or MSCENE folder (movies).
Page 110: Reducing The Effects Of Hand And Subject Movement
Reducing the Effects of Hand and Subject Movement You can turn on the camera’s Anti Shake feature to reduce image blur due to subject movement or hand movement when shooting a moving subject using telephoto, when shooting a fast-moving subject, or when shooting under dim lighting conditions.
Page 111: Taking Bright Images Without Flash
IMPORTANT! • Anti Shake will not work unless the ISO sensitivity setting (page 135) is set to “Auto”. • Though “ ” (Anti Shake) is displayed on the monitor screen following an automatic flash operation using the “Auto Flash” or “Red Eye Reduction” setting, or while the flash setting is “Flash On”...
Page 112: Shooting Images Of Business Cards And Documents (Business Shot)
IMPORTANT! • High Sensitivity is disabled following an automatic flash operation using the “Auto Flash” or “Red Eye Reduction” setting, or while the flash setting is “Flash On” or “Soft Flash”. • Shooting with High Sensitivity can cause an image to appear somewhat coarser than normal and can cause slight deterioration of image resolution.
Page 113 BEST SHOT has two Business Shot scenes from which to choose. • Business cards and • White board, etc. documents ■ Selecting a Business Shot Scene In the REC mode, press [BS]. Use [ ], [ ], [ ], and [ ] to select the “Business cards and documents”...
Page 114 Use [ ] and [ ] to select the candidate you want to use for correction. Use [ ] and [ ] to select “Correct” and then press [SET]. This will correct the image and store the resulting (corrected) image. •...
Page 115: Restoring An Old Photograph
Restoring an Old Photograph With Old Photo, you can record the image of an old, faded photograph and then use the camera’s built-in advanced digital camera technology to restore it. ■ Before Recording with Old Photo • Make sure the entire photograph you are trying to record is enclosed within the monitor screen.
Page 116 ■ Recording an Image with Old Photo Press the shutter button to shoot the image. • This displays a photograph contour confirmation screen and then saves the original recorded image. An error message will appear (page 285), without displaying the photograph contour confirmation screen, if the camera is unable to find the contour of the photograph.
Page 117: Recording Snapshots Into A Multi-Image Layout (Layout Shots)
IMPORTANT! • Digital zoom is disabled while recording with Old Photo. However, you can use optical zoom. • When recording the image of a photograph, the camera will not be able to recognize the shape of the photograph in the following cases.
Page 118 In the REC mode, press [BS]. Use [ ], [ ], [ ], and [ ] to select “Layout”, and then press [SET]. Use [ ] and [ ] to select a background color. Press the shutter button to record the first image.
Page 119: Auto Tracking A Moving Subject (Auto Framing)
IMPORTANT! • Only the final multi-snapshot image is saved in camera memory. The individual snapshots are not saved. • The size of the multi-snapshot image for this operation is fixed automatically at 7M (3072 × 2304 pixels). • While Layout Shot is being used, the setup of the camera is changed automatically as shown below.
Page 120 Press the shutter button all the way to record the image. • This will record the area enclosed within the cropping boundary. IMPORTANT! • Only the part of the image within the cropping boundary will be recorded. • The image size for this operation is fixed automatically at 3M (2048 ×...
Page 121: Advanced Settings
ADVANCED SETTINGS Changing the Focus Mode Your camera provides you with the five focus modes described below. The initial factory default focus mode is Auto Focus. Focus Mode Description Auto Automatic focus when the shutter button is half-pressed. Focus Auto Focus becomes fixed focus while shooting a movie. Macro Used for close-up shooting.
Page 122: Using Auto Focus
Perform the following steps to change the focus mode. In the REC mode, press [MENU]. On the “REC” tab, select “Focus” and then press [ ]. Use [ ] and [ ] to Focus Mode Icon select the focus mode setting you want and then press [SET].
Page 123: Using Macro Focus
When the image is focused, press the shutter button the rest of the way to shoot. IMPORTANT! • Auto Focus becomes fixed focus while shooting a movie. NOTE • When proper focusing is not possible because the subject is closer than the Auto Focus range, the camera will switch to the Macro Focus range automatically (Auto Macro).
Page 124 NOTE • When Macro Focus cannot focus properly because the subject is too far away, the camera will switch to the Auto Focus range automatically (Auto Macro). • Whenever you perform an optical zoom operation while shooting with Macro Focus, values will appear on the monitor screen as shown below to tell you the focus range.
Page 125 Auto Focus and Macro Focus Shooting Tips Changing the Auto Focus Area Use the following procedure to change the metering area used for Auto Focus (AF). In the REC mode, press [MENU]. On the “REC” tab, select “AF Area” and then press [ ].
Page 126 NOTE • When you select “ Multi” as the focus area, nine focus frames appear on the monitor screen. The camera will automatically determine the optimum focus frame(s), which will change to green on the monitor screen. Spot / Tracking Focus Frame •...
Page 127 Using Focus Lock “Focus lock” is the name of a technique you can use when you want to shoot an image in which the subject to be focused on is not within the focus frame in the center of the screen. •...
Page 128: Quick Shutter
Quick Shutter If you press the shutter button all the way without waiting for Auto Focus while Quick Shutter is turned on, the camera will record the image using a high-speed focus operation that is much faster than normal Auto Focus. This helps to avoid missing a special moment while you wait for the camera to Auto Focus.
Page 129: Using Fixed Focus (Pan Focus)
Using Fixed Focus (Pan Focus) Pan Focus (PF) fixes focus for a relatively wide focus range, which means you can shoot without waiting for the Auto Focus operation to finish. When you are ready to shoot, press the shutter button all the way, without pausing. Using Infinity Focus As its name suggests, Infinity Focus fixes focus at infinity ( Use this mode when shooting scenery and other faraway...
Page 130 Use [ ] and [ ] to focus the image, as you view the results on the monitor screen. At this time the image that is within the boundary will enlarge and fill the monitor screen, which aids in focusing. For this: Press this button: Closer focus...
Page 131: Correcting Image Brightness (Ev Shift)
Correcting Image Brightness (EV Shift) You can manually adjust an image’s exposure value (EV value) before shooting it. This feature helps to achieve better results when shooting a backlit subject, a strongly lit subject indoors, or a subject that is against a dark background. Exposure Compensation Value: –2.0EV to +2.0EV Unit: 1/3EV In the REC mode, press [SET].
Page 132: Controlling White Balance
After the EV value is the way you want, press [SET] to apply it. The exposure compensation value you set remains in effect until you change it. IMPORTANT! • When shooting under very dark or very bright conditions, you may not be able to obtain satisfactory results even after performing exposure compensation.
Page 133 To do this: Let the camera adjust white balance automatically Shoot outdoors on a clear day Shoot outdoors on an overcast rainy day, in the shade, etc. Shoot in the shadow of a building, in the shade of trees, etc. on a clear day Suppress color cast when shooting under white or day white fluorescent lighting Suppress color cast when shooting under...
Page 134: Configuring The White Balance Setting Manually
■ Configuring the White Balance Setting Manually Under complex lighting conditions, the preset white balance settings may not be able to produce natural looking colors. When this happens, you can configure the white balance setting manually for particular lighting conditions. Note that you will need to have a plain white sheet of paper on hand when performing the following procedure.
Page 135: Specifying Iso Sensitivity
Specifying ISO Sensitivity ISO sensitivity is a value that expresses sensitivity to light. A larger value indicates higher sensitivity, which is better for shooting when available lighting is dim. If you want to use faster shutter speeds, you should use a higher ISO sensitivity value. Under certain conditions, a fast shutter speed in combination with a high ISO sensitivity setting can cause digital noise, which makes an image appear rough.
Page 136: Specifying The Metering Mode
IMPORTANT! • Using flash with high ISO sensitivity can cause problems with subjects that close to the camera. • “Auto” ISO sensitivity always is used for movies, regardless of the current ISO sensitivity setting. • You can use the key customization feature to configure the [ ] and [ ] buttons so they control the ISO sensitivity setting (page 145).
Page 137 Center Weighted Center weighted metering concentrates on the center of the focus area to measure light. Use this metering method when you want to exert some control over exposure, without leaving settings totally up to the camera. Spot Spot metering takes readings at a very small area.
Page 138: Reducing The Effects Of Overexposure And Underexposure
Reducing the Effects of Overexposure and Underexposure You can use the procedure below to expand the dynamic range, which makes it possible to capture the bright areas of an image while reducing the chance of overexposure and underexposure. When shooting a subject that is back lit, for example, an expanded dynamic range minimizes overexposure and underexposure.
Page 139: Enhancing Human Skin Textures
Enhancing Human Skin Textures You can use the procedure below to reduce digital noise from human skin in the recorded image and enhance its texture. In the REC mode, press [MENU]. On the “Quality” tab, select “Portrait Refiner” and then press [ ]. Use [ ] and [ ] to select the setting you want and then press [SET].
Page 140: Controlling Image Sharpness
Controlling Image Sharpness Use the following procedure to adjust the sharpness of subject outlines in your images. In the REC mode, press [MENU]. On the “Quality” tab, select “Sharpness” and then press [ ]. Use [ ] and [ ] to select the setting you want and then press [SET].
Page 141: Adjusting Image Contrast
Adjusting Image Contrast Use the following procedure to adjust the contrast of your images. In the REC mode, press [MENU]. On the “Quality” tab, select “Contrast” and then press [ ]. Use [ ] and [ ] to select the setting you want and then press [SET].
Page 142: Using The On-Screen Histogram To Check Exposure
IMPORTANT! • Even if you do not stamp the date and/or time with Timestamp, you can do so later using the DPOF function and the printing software function (page 218). • Once date and time information is stamped in a print, it cannot be edited or deleted.
Page 143: How To Use The Histogram
NOTE • You can use key customization to configure the [ ] and [ ] buttons so they control the EV shift setting. Then you can perform EV shift while viewing the results on the on-screen histogram (page 145). ■ How to Use the Histogram A histogram is a graph that represents the lightness of an image in terms of the number of pixels.
Page 144: Other Useful Recording Functions
An overall well-balanced histogram results when the overall image is at optimal lightness. IMPORTANT! • A centered histogram does not necessarily guarantee optimum exposure. If you intentionally want to over expose or under expose the image, you may not want a centered histogram.
Page 145: Using Key Customize To Assign Functions [ ] And [ ]
Using Key Customize to Assign Functions [ ] and [ ] Key Customize lets you assign any one of the five functions listed below to the [ ] and [ ] keys. Once you do, you will be able to use the assigned functions while shooting snapshots or movies, without going through the menus.
Page 146: Displaying An On-Screen Grid
Displaying an On-screen Grid The on-screen grid can be displayed on the REC mode monitor screen for easy alignment when composing images. In the REC mode, press [MENU]. On the “REC” tab, select “Grid” and then press [ ]. Use [ ] and [ ] to select the setting you want and then press [SET].
Page 147: Using Icon Help
Using Icon Help Icon help displays guidance text about an icon when you select it on the monitor screen while in the REC mode. • Icon help text is displayed for the following functions: Recording mode, metering, flash mode, white balance, self- timer, EV shift.
Page 148: Using Mode Memory To Configure Power On Default Settings
Using Mode Memory to Configure Power On Default Settings You can configure the camera so it saves certain settings in “mode memory” whenever it is turned off, and restores the settings the next time you turn the camera back on. This keeps you from having to configure the camera each time you turn it off and on.
Page 149 Mode Setting Memory On Exits BEST SHOT BEST SHOT when camera is turned off. Flash Auto Focus Auto White Balance Auto Auto AF Area Spot Setting at power off Metering Multi Self-timer Flash Intensity Digital Zoom Focus mode before MF Position manual focus was selected.
Page 150: Resetting The Camera To Its Initial Factory Defaults
Resetting the Camera to Its Initial Factory Defaults Use the following procedure when you want to return to the camera to its initial factory default settings, which are the ones that are configured when you first purchase the camera. See “Menu Reference”...
Page 151: Viewing Snapshots And Movies
VIEWING SNAPSHOTS AND MOVIES Viewing a Snapshot Use the following procedure to view snapshots on the camera’s monitor screen. Press [ ] to enter the PLAY mode. • This will display one of the snapshots in memory, along with some information about the settings used to shoot it (page 272).
Page 152: Listening To The Audio Of An Audio Snapshot
Note that if you copy an image from another type of digital camera, only a rough image may be shown on the monitor screen.
Page 153: Viewing A Movie
Audio Playback Controls To do this: Do this: Fast forward or fast reverse Hold down [ ] or [ ]. playback Pause or restart playback Press [SET]. Adjust volume Use [ ] and [ ]. Change on-screen indicators Press [DISP]. Stop playback Press [MENU].
Page 154 To switch to the REC mode Press [ Movie Playback Controls To do this: Fast forward or fast reverse playback. • Each press of either button increases the speed of the fast forward or fast reverse operation up to three steps. Return from fast forward/fast reverse to normal playback Pause or restart playback...
Page 155: Playing Back A Movie With Anti Shake
Playing Back a Movie with Anti Shake Use the following procedure when you want to play back a movie with Anti Shake. Anti Shake is particularly useful when you have the camera connected to a TV for viewing, since the effects of camera movement are more evident on a big screen.
Page 156: Playing A Slideshow On The Camera
Playing a Slideshow on the Camera The slideshow feature lets you play the files stored in memory in sequence, automatically. You can configure the slideshow so it plays the files the way you want. In the PLAY mode, press [MENU]. On the “PLAY”...
Page 157 Effect (Select Use [ ] and [ ] to select the effect you a special want. • Pattern 1, 2, 3, 4, 5: Plays background effect.) music and applies an image change effect. – Pattern 1 through 4 use the same special effects but each use different background music.
Page 158: Changing The Background Music
“Time” setting. • In image copied from a computer or an image recorded with a different type of digital camera may remain on the screen longer than the time specified by “Interval”. ■...
Page 159: Connect The Camera To Your Computer
Transferring Background Music to the Camera You can select background music after its file has been saved to the memory card or the camera’s built in memory. Connect the camera to your computer (pages 226, 245). • If you save a background music file to a memory card, load the card into the camera.
Page 160 IMPORTANT! • The background music files will be loop played in sequence. • If both the memory card loaded in the camera and the camera’s built-in memory contain background music files, the files on the memory card are played. • See the user documentation that comes with your computer for information about moving, copying, and deleting files.
Page 161 Press the USB cradle’s [PHOTO] button to start the slideshow. The slideshow is performed in accordance with the settings you configured with the procedure on page 156. The camera will turn off automatically after the time you specified with the “Time” setting elapses.
Page 162: Viewing Camera Images On A Tv
Viewing Camera Images on a TV Use the procedure below to view snapshots and movies on a TV screen. Connect the USB cradle to a TV. VIDEO IN Jack (Yellow) AUDIO IN Jacks (White) Audio Video Yellow White AV Cable [AV OUT] (AV output port) Turn off the camera and place it onto the USB cradle.
Page 163 IMPORTANT! • When connecting to a TV to display images, be sure to configure the camera’s [ ] (REC) and [ buttons for “Power On” or “Power On/Off” (page 208). • All icons and indicators that appear on the monitor screen also appear on the TV screen.
Page 164: Selecting The Screen Aspect Ratio And Video Output System
■ Selecting the Screen Aspect Ratio and Video Output System You can use the procedure in this section to select either NTSC or PAL as the video output system. You can also specify an aspect ratio of 4:3 or 16:9. Press [MENU].
Page 165: Zooming The Displayed Image
Zooming the Displayed Image Perform the following procedure to zoom the image currently on the monitor screen up to eight times its normal size. In the PLAY mode, use [ ] and [ ] to display the snapshot you want to zoom. Press the zoom button Each press of this button zooms the image more.
Page 166: Using The 12-Image Screen
Using the 12-image Screen You can use the procedure below to display a screen that shows 12 images. Press the zoom button This displays the 12-image screen with a selection boundary around the last image that was on the monitor screen. Select the image you want.
Page 167 Use [ ], [ ], [ ], and [ ] to move the selection boundary to the date whose image you want to view and then press [SET]. This will display the first image recorded on that date. NOTE • The year and month on the calendar is displayed using the same format as you selected for the “Date Style”...
Page 168: Using Image Roulette
Using Image Roulette Image Roulette scrolls through images on the monitor screen, finally stopping randomly at a final image. It puts some fun into image viewing that you can use for game playing, to award prices, for fortunetelling, and just about anything else you can imagine.
Page 169: Editing Images
EDITING IMAGES Resizing a Snapshot You can reduce the size of a snapshot and save the result as a separate snapshot. The original snapshot is also retained. You can resize a snapshot to any one of the following sizes. Image Size (Pixels) Print Size 6M* 2816 ×...
Page 170: Cropping A Snapshot
IMPORTANT! • You cannot resize a VGA (640 × 480 pixels) size image. • Resizing a snapshot shot with an aspect ratio of 16:9 or 3:2 will cause the left and right sides of the image to be cut off. The aspect ratio of the resulting image will be 4:3.
Page 171: Keystone Correction
Use the zoom button to zoom, and [ ], [ ], [ ], and [ ] to move around the zoomed image to display the part you want to extract. Press [SET] to extract the displayed part and save it as a separate file. •...
Page 172: Using Color Restoration To Correct The Color Of An Old Photograph
Color of an Old Photograph Color restoration let you correct the old color of a photograph shot with a digital camera. This function is useful for correcting existing old photographs, posters, etc. • Performing color restoration on an image causes a new (restored) 2M (1600 ×...
Page 173 Press the zoom button to zoom the cropping boundary. Use [ ], [ ], [ ], and [ ] to move the selection boundary to the desired location and then press [SET]. The camera will correct color automatically and save the corrected image.
Page 174: Editing The Date And Time Of An Image
Editing the Date and Time of an Image Use the procedure in this section to change the date and time of a previously recorded image. In the PLAY mode, use [ ] and [ ] to display the image whose date and time you want to edit.
Page 175: Rotating An Image
Rotating an Image Perform the following procedure to rotate the image (snapshot or movie) currently on the monitor screen. This feature comes in handy with a snapshot that you shot using portrait (vertical) orientation. After rotating a snapshot, you can return it to its original orientation, if you want.
Page 176: Combining Multiple Snapshots Into A Single Image (Layout Print)
Combining Multiple Snapshots into a Single Image (Layout Print) You can use the following procedure to insert snapshots into the frames of a layout and produce a new image that contains multiple snapshots. • Layout pattern • Layout pattern (Two Images) (Three Images) In the PLAY mode, use [ ] and [ ] to select the first snapshot you want to include in the...
Page 177: Adjusting White Balance Of A Recorded Image
Use [ ] and [ ] to select the snapshot for the layout and then press [SET]. Repeat steps 6 and 7 for all of the other frames in the layout. The final layout image will be saved after you insert the final snapshot into it.
Page 178: Adjusting Image Brightness
In a location where color temperature is very high, like in the shade of a building, etc. Under white or daylight white fluorescent lighting, without suppressing color cast Under daylight fluorescent lighting, while suppressing color cast Under incandescent lighting, while suppressing color cast Cancel white balance adjustment •...
Page 179: Reducing The Effects Of Underexposure
Use [ ] and [ ] to select the setting you want, and then press [SET]. To get this: Select this setting: Brighter –1 Darker –2 • To cancel the brightness adjustment operation, press [ ] or [MENU]. IMPORTANT! • Adjusting the brightness of an image creates a new image with the new brightness level.
Page 180: Editing A Movie On The Camera
IMPORTANT! • Performing Dynamic Range correction on an image causes the new (corrected) version to be stored as a separate file. • When you display a corrected image on the camera’s monitor screen, the date and time indicates when the image was originally recorded, not when the image was corrected.
Page 181 Press [ ]. • You could also perform the following steps in place of steps 1 through 3 above. In the PLAY mode, select the movie you want to edit and then press [MENU]. On the “PLAY” tab, select “Movie Editing” and then press [ ].
Page 182: Creating A Snapshot Of A Movie Frame (Motion Print)
Press [ ] to perform the required cut operation(s). For this type of cut Do this: operation: Select the point up to which you (To-Point Cut) want to cut and then press [ ]. Select the point from which you (From-Point Cut) want to cut and then press [ ].
Page 183 In the PLAY mode, use [ ] and [ ] to scroll through images and display the movie that contains the frame you want to use. Press [MENU]. On the “PLAY” tab, select “MOTION PRINT”, and then press [ ]. Use [ ] and [ ] to select either “9 frames”...
Page 184: Using Audio
USING AUDIO Adding Audio to a Snapshot The dubbing feature of your camera lets you add audio to a snapshot after you shoot it. A snapshot that includes audio (regardless of whether the audio was recorded on the spot or added later) is indicated by the “...
Page 185 ■ Re-recording Snapshot Audio IMPORTANT! • Note that you cannot restore the original audio once you delete or re-record the audio of a snapshot. In the PLAY mode, use [ ] and [ ] to scroll through images and display the snapshot whose audio you want to re-record.
Page 186: Recording Audio Only (Voice Recording)
Recording Audio Only (Voice Recording) Voice Recording lets you record audio only, without a snapshot or movie. Using built-in memory only, you get up to about 33 minutes, 43 seconds of Voice Recording. In the REC mode, press [BS]. Use [ ], [ ], [ ], and [ ] to select “Voice Recording”...
Page 187 NOTE • You can also play back Voice Recording data on your computer using QuickTime. • Your camera supports the following audio data formats. – Audio Data: WAVE/ADPCM (.WAV extension) – Approximate Audio File Size: 165 KB (30-second recording at 5.5 KB per second) •...
Page 188 Voice Recording Playback Controls To do this: Fast forward or fast reverse playback. Pause or restart playback Jump to a marker in the audio data while playback is paused. Adjust volume • You can adjust volume only while playback is in progress or paused. Toggle on-screen indicators on or off Stop playback Do this:...
Page 189: Managing Your Files
MANAGING YOUR FILES Files and Folders Your camera treats each snapshot, movie, and Voice Recording, as a separate file. You can delete, protect, and copy files as required. Files are grouped in folders that are created automatically by the camera. Files and folders have their own unique names, which are assigned automatically by the camera.
Page 190: Protecting A File Against Deletion
NOTE • You can view folder and file names on your computer. For details about how file names are displayed on the camera’s monitor screen, see page 272. • The total number of folders and files that is allowed depends on the image size and quality, and capacity of the memory card being used for storage.
Page 191 Use [ ] and [ ] to select “On” and then press [SET]. An image that is protected is indicated by the “ ” icon. Now you can repeat steps 3 and 4 to protect another image or exit this procedure by pressing [MENU].
Page 192: Using The Favorite Folder
Using the FAVORITE Folder The FAVORITE folder is located in the camera’s built-in memory, and you can use it to store personal snapshots that you do not want displayed during normal PLAY mode operations. FAVORITE folder snapshots remain in camera memory, even if you change to a different memory card.
Page 193 ■ Viewing Snapshots in the FAVORITE Folder In the PLAY mode, press [MENU]. On the “PLAY” tab, select “Favorites” and then press [ ]. Use [ ] and [ ] to select “Show” and then press [SET]. Use [ ] and [ ] to scroll through the snapshots in the FAVORITE folder.
Page 194: Copying Files
Copying Files Files can be copied from the camera’s built-in memory to a memory card, or from a memory card to built-in memory. This makes it possible, for example, to perform the following steps and copy a file from your memory card to another person’s memory card.
Page 195 ■ Copying a Single File from a Memory Card to Built-in Memory With this procedure, files must be copied one-by-one. Load the memory card that contains the file you want to copy into the camera. Turn on the camera, enter the PLAY mode and then press [MENU].
Page 196: Deleting Files
DELETING FILES You can delete files you no longer need, or after you transfer them to your computer’s hard disk or print them. This frees up memory for new files. You can delete one specific file, or you can delete all files currently in memory.
Page 197: Deleting All Files
Deleting All Files In the PLAY mode, press [ ] ( Use [ ] and [ ] to select “All Files Delete” and then press [SET]. In response to the confirmation message that appears, use [ ] and [ ] to select “Yes”. •...
Page 198: Other Settings
OTHER SETTINGS Configuring Camera Sound Settings Your camera lets you configure the following sound settings. • Type of sound and volume for shutter release and other operations • Volume level for movie and Voice Recording playback ■ Selecting the Operation Sound Press [MENU].
Page 199 ■ Setting the Operation Tone Volume Level Press [MENU]. On the “Set Up” tab, select “Sounds” and then press [ ]. Use [ ] and [ ] to select “ Use [ ] and [ ] to specify the playback volume setting you want and then press [SET].
Page 200: Turning The Startup Screen On Or Off
Turning the Startup Screen On or Off You can configure the camera to display a startup screen of an image you recorded, whenever you turn it on. • Even if you configure startup screen settings in the PLAY mode, the startup screen does not appear when turn on the camera by pressing [ ] (PLAY).
Page 201: Specifying The File Name Serial Number Generation Rule
Specifying the File Name Serial Number Generation Rule Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 189). Press [MENU]. On the “Set Up” tab, select “File No.” and then press [ ].
Page 202: Changing The Camera Date And Time Setting
Changing the Camera Date and Time Setting When changing the date and time setting, be sure to do so for your Home City (the location where you normally use the camera). If you already have your Home City setting configured correctly, you can use the procedure under “Setting the Date and Time for Your Home City”...
Page 203: Changing The Date Format
■ Setting the Date and Time for Your Home City Press [MENU]. On the “Set Up” tab, select “Adjust” and then press [ ]. Set the date and the time. To do this: Move the cursor between settings Change the setting at the cursor location Toggle between 12-hour and 24-hour format...
Page 204: Using World Time
NOTE • This setting also affects the Operation Panel date format as shown below (page 55). When this date format setting The Operation Panel is selected: date appears as: YY/MM/DD or MM/DD/YY MM/DD DD/MM/YY DD/MM Using World Time You can use the World Time screen to view the current time in zone that is different from your Home City when you go on a trip, etc.
Page 205 Use [ ] and [ ] to select “City” and then press [ ]. • To configure the summer time setting, use [ ] and [ ] to select “DST” and then select “On”. • Summer time is used in some areas to advance the current time setting by one hour during the summer months.
Page 206: Changing The Display Language
Changing the Display Language You can use the procedure below to select a display text language. • The number and types of languages depend on the geographic area where the camera was marketed. Press [MENU]. On the “Set Up” tab, select “Language” and then press [ ].
Page 207: Changing The Usb Port Protocol
Changing the USB Port Protocol You can use the procedure below to change the USB communication protocol that is used when exchanging data with a computer, printer, or other external device. Select the protocol that suits the device to which you are connecting. Press [MENU].
Page 208: ] (Rec) And [ ] (Play) Button Settings
] (REC) and [ ] (PLAY) Button Settings You configure the camera so it does not turn on when you press the [ ] (REC) or [ ] (PLAY) button, or to turn off when you press the [ ] (REC) or [ ] (PLAY) button.
Page 209: Formatting Built-In Memory
Formatting Built-in Memory Formatting built-in memory deletes any data stored in it. IMPORTANT! • Note that data deleted by a format operation cannot be recovered. Check to make sure you do not need any of the data in built-in memory before you format it. •...
Page 210: Printing
PRINTING Types of Printing There are three different methods you can use for printing images. Professional Print Service (page 211) Printing at Printing on a Printer (page 212) Home Printing with a Computer Take the memory card that contains the images you want to print to a professional print service.
Page 211: Printing Precautions
■ Printing Precautions • See the documentation that comes with your printer for information about print quality and paper settings. • Contact the manufacturer of your printer to find out if it supports PictBridge or USB DIRECT-PRINT, for new printer versions, etc.
Page 212: Using Your Printer To Print Images
Using Your Printer to Print Images If your printer is either of the types described below, you can use it to print without going through a computer. – Printer equipped with a card slot for the type of memory card you are using –...
Page 213 Connect the USB cable that comes bundled with the camera to the USB cradle and your printer’s USB port. USB Cable (Bundled) USB Port Connector A • Also, connect the AC adaptor to the cradle and plug the adaptor into an electrical outlet. •...
Page 214 Use [ ] and [ ] to select “Paper Size” and then press [ ]. Use [ ] and [ ] to select a paper size and then press [SET]. • The following are the available paper sizes. 3.5" × 5", 5" × 7", 4" × 6", A4, 8.5" × 11", By Printer •...
Page 215: Using Dpof To Specify Images To Be Printed And The Number Of Copies
Use [ ] and [ ] to select “Print” and then press [SET]. Printing will start and the message “Busy... Please wait...” will appear on the monitor screen. The message will disappear after a short while, even though printing is still being performed.
Page 216 ■ Configuring DPOF Settings Individually for Each Image In the PLAY mode, press [MENU]. On the “PLAY” tab, select “DPOF Printing” and then press [ ]. Use [ ] and [ ] to select “Select images” and then press [ ]. Use [ ] and [ ] to scroll through the images until the one you want to print is on the monitor screen.
Page 217 ■ Configuring the Same DPOF Settings for All the Images In the PLAY mode, press [MENU]. On the “PLAY” tab, select “DPOF Printing” and then press [ ]. Use [ ] and [ ] to select “All images” and then press [ ]. Use [ ] and [ ] to specify the number of copies.
Page 218: Date Stamping
Date Stamping You can use any one of the following three methods to include the recording date in the printout of an image. • Configure DPOF settings on the camera to specify date stamping (page 215) – If an image already has the date or time stamped into it using the camera’s Date Stamping feature, turning on DPOF date stamping will cause the two dates to be stamped in the same location.
Page 219: Supported Protocols
Supported Protocols Your camera supports the protocols described below. ■ PictBridge and USB DIRECT-PRINT • PictBridge Camera and Imaging Products Association (CIPA) • USB DIRECT-PRINT Seiko Epson Corporation ■ PRINT Image Matching III Using image editing software and printing on a printer that also supports PRINT Image Matching III makes it possible to use information about shooting conditions that is recorded with the...
Page 220: Using The Camera With Acomputer
USING THE CAMERA WITH A COMPUTER What you can do Connecting the camera to a computer with the bundled USB cable provides you with the capabilities described below. View and You can use your computer to view camera store images* images and for long-term storage of images.
Page 221: Using The Camera With A Windows Computer
The procedures you need to perform when using the camera with your computer and when using the bundled software are different for Windows and the Macintosh. • Windows users should refer to “Using the Camera with a Windows Computer” on page 221. •...
Page 222 DirectX, Microsoft 2000 Windows Media Player, QuickTime 7, and Flash Player separately. VideoStudio 10 Plus for CASIO (Trial Version) • This is the Trial Version of the software, whose Edit movies use is limited to 30 days XP/2000 following installation.
Page 223: Computer System Requirements For Bundled Software
Windows Media Player 9 or higher QuickTime 7 or higher DirectX 9.0c HD : 65MB for installation (18MB on hard disk) YouTube Uploader for CASIO • Sufficient memory to run the operating system • Computer configuration that enables playback of movies on the YouTube site •...
Page 224 CD-ROM that comes bundled with the camera. ■ Precautions for Windows Vista Users • Photo Transport and CASIO DATA TRANSPORT will not run under Windows Vista 64bit Version. • Photo Transport and CASIO DATA TRANSPORT can be used only by users logged in with Administrator privileges.
Page 225: Viewing And Storing Images On A Computer
Viewing and Storing Images on a Computer You can view and store images (snapshot and movie files) on your computer by connecting to the camera via its USB cradle. You can connect the camera to your computer to view and store images (snapshot and movie files).
Page 226 ■ Connecting the Camera to Your Computer the First Time IMPORTANT! • If you are not using the AC adaptor to power the camera, the battery may go low and cause the camera to turn off while it is in the middle of exchanging files with your computer.
Page 227 Press the camera’s [ON/OFF] button to turn it on and then press [MENU]. • Do not place the camera on the USB cradle yet. On the “Set Up” tab, select “USB” and then press [ ]. Use [ ] and [ ] to select “Mass Storage” and then press [SET].
Page 228 Camera-Computer Connection Pressing the cradle’s [USB] button puts it into the USB mode, which is indicated by the USB lamp lighting green. In this mode, your computer recognizes the memory card loaded in the camera (or the camera’s built-in memory if it does not have a memory card loaded) as a removable disk.
Page 229 ■ Connecting the Camera to Your Computer after the First Time Since you need to configure menu settings only the first time you connect the camera to your computer, later connections are much simpler. Press the camera’s [ON/OFF] button to turn it off and then place the camera on the USB cradle.
Page 230 Double-click the file that contains the image you want to view. This displays the image. • For information about file names, see “Memory Folder Structure” on page 253. NOTE • An image that was rotated on the camera will be displayed on your computer screen in its original (unrotated) orientation.
Page 231 On the shortcut menu that appears, click “Copy”. Windows XP users: Click “Start” and then “My Documents”. Windows Vista users: Click “Start” and then “Documents”. Windows 2000/Me/98SE/98 users: Double- click “My Documents” to open it. • If you already have a “DCIM” folder in “My Documents”, the next step will overwrite it.
Page 232: Transfer Of Images From The Camera And Management Of Images On The Computer
■ Removing the Camera from the USB Cradle Windows Vista/XP/98SE/98 Users Press the USB cradle [USB] button. After making sure that the cradle’s USB lamp is not lit, remove the camera from the cradle. Windows 2000/Me Users Click card services in the task tray on your computer screen, and disable the drive number assigned to the camera.
Page 233 Click “Photo Loader with HOT ALBUM 3.1” to select it and then click “Read me”. • “Read me” files contain important information about installation, including installation conditions and computer system requirements. Click “Install” for Photo Loader with HOT ALBUM. Follow the instructions that appear on your computer screen to install Photo Loader with HOT ALBUM.
Page 234: Playing Movies
Playing Movies You can play back movies on a computer that has QuickTime 7 or higher installed. To play back a movie, first copy it to your computer and then double-click the movie file. Start up your computer, and place the bundled CD-ROM into its CD-ROM drive.
Page 235: Uploading Movie Files To Youtube
To simplify uploading of movie files you recorded with the “For YouTube” BEST SHOT scene, install YouTube Uploader for CASIO from the CD-ROM that comes with the camera. What is YouTube? YouTube is a site managed by YouTube, LLC. At YouTube, you can upload movies you recorded and view movies that have been uploaded by others.
Page 236 ■ Uploading a movie file to YouTube IMPORTANT! • Before you can use YouTube Uploader for CASIO, you need to go to the YouTube website (http://www.youtube.com/) and register as a user there. • Do not upload any video that is copyrighted (including...
Page 237 Press the USB cradle’s [USB] button. • YouTube Uploader for CASIO will start up automatically. • The first time you start up YouTube Uploader, a dialog box will appear and ask you to enter your YouTube user ID and your password, and to configure network environment settings.
Page 238: Editing A Movie
Follow the instructions that appear on your computer screen to install Movie Wizard 3.2 SE VCD. For more powerful editing capabilities, install the trial version of VideoStudio 10 Plus for CASIO, which is a 30-day trial version. USING THE CAMERA WITH A COMPUTER...
Page 239: Transferring Images To The Camera
First, connect the camera to your computer. • See page 226 for information about connecting the camera to your computer. On your computer, click “Start”, “All Programs”, “Casio” and then “Photo Transport”. This starts up Photo Transport. USING THE CAMERA WITH A COMPUTER...
Page 240 Drop the image data you want to transfer to the camera onto the Photo Transport Transfer button. Move your mouse pointer to the image file you want to transfer, and then hold down your mouse button. Keeping your mouse button depressed, drag the mouse pointer and the image file along with it to the Photo Transport Transfer button, and then release the mouse button.
Page 241 First, connect the camera to your computer. • See page 226 for information about connecting the camera to your computer. On your computer, click “Start”, “All Programs”, “Casio” and then “Photo Transport”. This starts up Photo Transport. Display the screen whose screen capture you want to transfer.
Page 242: Viewing User Documentation (Pdf Files)
Follow the instructions that appear on the display to transfer a capture of the selected area to the camera. • The image transfer method and detailed image settings used depend on the Photo Transport settings. For details, see Photo Transport help (page 242). IMPORTANT! •...
Page 243: User Registration
IMPORTANT! • You must have Adobe Reader or Adobe Acrobat Reader installed on your computer in order to view the contents of a PDF file. If you do not already have Adobe Reader or Adobe Acrobat Reader installed, install Adobe Reader from the bundled CD-ROM that has “Adobe Reader”...
Page 244: System Requirements
Actual requirements are greater, depending on the number of images and the sizes of the images being handled. CASIO DATA TRANSPORT 1.0 : OS X 10.2.8 or greater Other: Sufficient memory to run the operating system IMPORTANT! •...
Page 245: Viewing And Storing Images On A Macintosh
Viewing and Storing Images on a Macintosh You can view and store images (snapshot and movie files) on your Macintosh by connecting to the camera. IMPORTANT! • Connection is not supported to a Macintosh running Mac OS 8.6 or lower, or Mac OS X 10.0. Connection is supported to a Macintosh running Mac OS 9 or OS X (10.1, 10.2, 10.3, 10.4) only.
Page 246 Connect the USB cable that comes bundled with the camera to the USB cradle and the USB port of your Macintosh. USB Cable (Bundled) USB Port Connector A • Orient the USB plug so it correctly matches the shape of the USB port when you connect them.
Page 247 Press the USB cradle’s [USB] button. [USB] Camera-Macintosh Connection Pressing the cradle’s [USB] button puts it into the USB mode, which is indicated by the USB lamp lighting green. In this mode, your Macintosh recognizes the memory card loaded in the camera (or the camera’s built-in memory if it does not have a memory card loaded) as a drive.
Page 248 ■ Connecting the Camera to Your Macintosh after the First Time Since you need to configure menu settings only the first time you connect the camera to your Macintosh, later connections are much simpler. Press the camera’s [ON/OFF] button to turn it off and then place the camera on the USB cradle.
Page 249 ■ Saving an Image on Your Macintosh In order to work on an image to put it into an album, you must first save it to your Macintosh. To save a camera image to your Macintosh, you must first establish a connection between them via the camera’s USB cradle.
Page 250: Transfer Of Images From The Camera And Management Of Images On Your Macintosh
■ Removing the Camera from the USB C On your Macintosh screen, drag the camera drive to Trash. Press the USB cradle [USB] button. After making sure that the cradle’s USB lamp is not lit, remove the camera from the cradle. Transfer of Images from the Camera and radle Management of Images on Your...
Page 251: Playing Movies
Open the file named “camera_xx.pdf”. • “xx” is the language code (Example: camera_e.pdf is for English.) Registering as a User Internet registration only is supported. Visit the following CASIO website to register: http://world.casio.com/qv/register/ USING THE CAMERA WITH A COMPUTER...
Page 252: Reading Files Directly From A Memory Card
Reading Files Directly from a Memory Card The method you should use to read files from a memory card depends on the type of computer you have. Some typical examples are shown below. After you connect, use the same procedures as those that you use when the camera is connected to your computer via the USB cradle.
Page 253: Memory Card Data
DCF is a system that defines both image file formats and the structure of the folders that store data. This makes it possible for a digital camera, printer, or other DCF-compliant device to display or print image data from another DCF device.
Page 254 • • • (Background Music Folder) SSBGM (Background Music File) SSBGM001.WAV (Background Music File) SSBGM002.WAV • • • (Startup Screen File) STARTING.JPG* *1 Other folders are created when the following BEST SHOT scenes are used for recording: “For eBay” or “Auction” (scene name depends on camera model), or “For YouTube”.
Page 255: Supported Image Files
• DPOF File Folder Folder that contains DPOF files, etc. • Snapshot BEST SHOT Folder Folder that contains snapshot BEST SHOT user setup files • Snapshot User Setup File File of a snapshot BEST SHOT user setup • Movie BEST SHOT Folder Folder that contains Movie BEST SHOT user setup files •...
Page 256: Handling Precautions
■ Built-in Memory and Memory Card Data Handling Precautions • When saving camera data to a computer hard disk, MO disk, or other medium, be sure to transfer the entire DCIM folder and its contents. Changing the name of the DCIM to a date or something similar after you copy it to your computer is a good way to keep track of multiple DCIM folders.
Page 257: Transferring Documents To Your Camera (Data Storage)
Transferring documents from a computer running Windows To transfer documents on your computer to the camera so you can view it on the monitor screen, you need to install CASIO DATA TRANSPORT from the CD-ROM that comes with the camera.
Page 258: Transferring Documents
On the menu screen, click the tab for the language you want. • Regardless of the language you select, the English version of CASIO DATA TRANSPORT is installed. Click the DATA TRANSPORT “Read me” file and read its contents. • “Read me” files contain important information about installation, including installation conditions and computer system requirements.
Page 259: Transferring Documents From A Macintosh
“Orientation” setting, and then click the [OK] button. Transferring documents from a Macintosh To transfer documents on your computer to the camera so you can view it on the monitor screen, you need to install CASIO DATA TRANSPORT from the CD-ROM that comes with the camera. ■...
Page 260 On the menu bar, click “File” and then “Print”. Click the PDF button at the bottom of the dialog box and then select “CASIO DATA TRANSPORT” from the menu that appears. This will display a dialog box for customizing document file properties (date, file name, icon).
Page 261: Viewing A Transferred Document On The Camera
Viewing a Transferred Document on the Camera On the camera, select either the REC mode or the PLAY mode. Press [DATA]. This enters the data mode and displays a menu of documents currently in camera memory. • The currently selected document is the one with the red boundary around it.
Page 262: Rotating A Document Page
NOTE • Pressing [SET] or the zoom button toggles between the document menu and the document page screens. • Pressing [DISP] while the document page screen is on the display will display a menu screen for configuring screen settings. You can use the menu to turn display information on or off.
Page 263 Specifying the Initial Data Mode Screen You can use the following procedure to configure the camera so either the document data list or the last document page you were viewing appears first whenever you press [DATA] to enter the data mode. Press [MENU].
Page 264: Managing Document Data On The Camera
Managing Document Data on the Camera Protecting Document Data You can protect a specific document or all documents against deletion (memory protect). ■ To protect a specific document Press [DATA]. Press [MENU]. On the “DATA” tab, select “Protect”, and then press [ ].
Page 265: Deleting Document Data
■ To protect all documents Press [DATA]. Press [MENU]. On the “DATA” tab, select “Protect”, and then press [ ]. Use [ ] and [ ] to select “All Files : On” and then press [SET]. Press [MENU]. To unprotect all documents Perform the procedure under “To protect all documents”, but in step 4 select “All Files : Off”...
Page 266: Deleting Documents
To delete all the pages in a document page Display a page in the document whose pages you want to delete and then press [ ] ( Use [ ] and [ ] to select “All pages” and then press [SET]. Use [ ] and [ ] to select “Yes”.
Page 267 To delete all documents While the document menu is displayed, press [MENU]. Use [ ] and [ ] to select “All docs” and then press [SET]. Use [ ] and [ ] to select “Yes”. • To cancel the delete operation, select “No” instead of “Yes”.
Page 268: Appendix
APPENDIX General Guide The numbers in parentheses indicate the pages where each part is explained. ■ Camera Front Shutter (page 64) [ON/OFF] (Power) (page 43) Flash (page 75) AF Assist/Self-timer Lamp (pages 62, 69, 79, 277) Lens Microphone (pages 86, 96) Back bkbl Operation Lamp...
Page 269: Usb Cradle
Bottom Battery/Memory Card Slots (pages 36, 48) Cradle Contact (page 38) Tripod Hole Use this hole when attaching to a tripod. Speaker (page 152) ■ USB Cradle Front Back Camera Contact (page 38) USB Lamp (pages 227, 247, 279) [USB] Button (pages 215, 227, 247) [PHOTO] Button (pages 161, 162)
Page 270: Monitor Screen Contents
Monitor Screen Contents The monitor screen uses various indicators, icons, and values to keep you informed of the camera’s status. • The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the monitor screen in various modes.
Page 271: Movie Recording Mode
■ Movie Recording Mode Panel : On Panel : Off Focus Mode (page 121) Recording Mode Remaining Movie Memory Capacity (page 95) Movie Recording Time (page 95) Anti Shake Indicator (page 110) White Balance Setting (page 132) Exposure Compensation (page 131) Battery Level Indicator (page 40) Histogram (page 142) APPENDIX...
Page 272 ■ Snapshot Playback Mode blbk File Type (page 151) Recording Mode Protect Indicator (page 190) Battery Level Indicator Folder Name/File Name (page 40) (page 189) Histogram (page 142) Snapshot Image Quality Exposure Compensation (page 68) (page 131) Snapshot Image Size (page 66) ISO Sensitivity (page 135) Aperture Value (page 65)
Page 273: Menu Reference
Menu Reference The tables in this section show the items that appears on the menus that appear on the monitor screen when you press [MENU]. The items included on the menus depend on whether the camera is in the REC mode or PLAY mode. •...
Page 274 Quality Tab Menu Size 8M (3264 × 2448)* / 3:2 (3264 × 2176) / 16:9 (3264 × 1840) / 6M (2816 × 2112) / 4M (2304 × 1728) / 2M (1600 × 1200) / VGA (640 × 480) Quality Fine / Normal* / Economy (Snapshots) Quality UHQ / UHQ Wide / HQ* / HQ Wide / Normal /...
Page 275 Set Up Tab Menu Sounds Startup* / Half Shutter / Shutter / Operation / Operation / Startup On (Selectable image) / Off* File No. Continue* / Reset Language Changes the screen text language. • The number and types of languages depend on the geographic area where the camera was marketed.
Page 276: Play Mode
■ PLAY Mode PLAY Tab Menu Slideshow Start* / Images / Time / Interval / Effect / Cancel Layout Print – MOTION PRINT 9 frames* / 1 frame / Cancel Anti Shake On / Off* Movie Editing Cut (Before) / Cut (Between) / Cut (After) / Cancel* Dynamic Range...
Page 277: Display Menu Reference
Display Menu Reference The tables in this section show the items that appears on the menus that appear on the monitor screen when you press [DISP]. Most of these items are for configuring monitor screen settings. The items included on the menus depend on whether the camera is in the REC mode or PLAY mode.
Page 278: Rec Mode
■ REC Mode Operation Lamp Meaning Color Status Operational (Power on, recording enabled). / Auto Focus operation was successful. / LCD is off or in sleep state. Green Storing movie or processing image. / Image is Flashing being stored. / Cannot Auto Focus. / Card is being formatted.
Page 279: Usb Cradle Indicator Lamps
■ USB Cradle Indicator Lamps The USB cradle has two indicator lamps: a [CHARGE] lamp and a USB lamp. These lamps light and flash to indicate the current operational status of the cradle and camera. [CHARGE] lamp USB Lamp [CHARGE] Lamp USB Lamp Color Status...
Page 280: Troubleshooting Guide
Purchase a separately available CASIO NP-20 rechargeable lithium ion battery. the camera and wait until it cools down before trying to use it again.
Page 281 Problem The subject is out of focus in The image may not be focused properly. When composing the image, make sure the subject is located the recorded image. inside the focus frame. The flash does not fire. 1) If “ 2) If the battery is dead, charge it (page 36).
Page 282 Problem Though available lighting is Not enough light is reaching the subjects. Change the flash mode setting to “ bright, the faces of people in synchro flash (page 75), or use adjust EV shift to the + side (page 131). the image are dark.
Page 283 Images are not displayed. This camera cannot display non-DCF images recorded onto a memory card using another digital camera. I can’t edit images (Layout Note that you cannot edit the following types of imagess.
Page 284 If the same message appears after you turn power back on, contact your retailer or a CASIO service center.
Page 285: Display Messages
(page 196). LENS ERROR This message appears and the camera turns off whenever lens performs some unexpected operation. If the same message appears after you turn power back on, contact your retailer or a CASIO service center. APPENDIX...
Page 286 Take action to remove the obstacle, and try turning on power again. SYSTEM ERROR Your camera system is corrupted. Contact your retailer or an authorized CASIO service center. The card is The LOCK switch of the SD memory card or locked.
Page 287: Main Specifications
Specifications ■ Main Specifications Product Type Digital Camera Model EX-S880 ■ Camera Functions Image Files Snapshots: Format JPEG (Exif Version 2.2); DCF (Design Rule for Camera File System) 1.0 standard; DPOF compliant Movies: H.264/AVC MOV format Audio: WAV Recording Media Built-in Memory 10.8 MB...
Page 288 Approximate Image Approximate Image Built-in Memory Size Image File Quality (10.8 MB) (Pixels) Size Capacity Fine 1.26 MB 8 images (1600 × Normal 790 KB 13 images 1200) Economy 470 KB 23 images Fine 330 KB 33 images (640 × Normal 190 KB 56 images...
Page 289 * The number of image values are approximate and are provided for reference only. The actual number of images you may be able to record may be less than that indicated on the monitor screen. * Image files sizes are approximate and are provided for reference only.
Page 290 Sensitivity Snapshots (Standard): Auto, ISO 64, ISO 100, ISO 200, ISO 400, ISO 800 • Snapshots (When “Anti Shake” setting is “Auto”): ISO 800 (maximum) Snapshots (When BEST SHOT scene is “Anti Shake”): ISO 800 (maximum) Snapshots (When BEST SHOT scene is “High Sensitivity”): ISO 1600 (maximum) Movies: Auto Self-timer...
Page 291: Power Supply
■ Power Supply Power Requirements Rechargeable Lithium Ion Battery (NP-20) × 1 Approximate Battery Life All of the values provided below represent the approximate amount of time under normal temperature (23°C (73°F)) before the camera turns off. These values are not guaranteed. Low temperatures shorten battery life.
Page 292 Power 3.7 V DC; Approximately 4.3 W Consumption Dimensions 94.5 (W) × 60.4 (H) × 17.3 (D) mm (3.7"(W) × 2.4"(H) × 0.7"(D)) (Excluding projections; 13.7 mm (0.5") at thinnest point) Weight Approximately 128 g (4.5 oz) (excluding battery and bundled accessories) Bundled Rechargeable Lithium Ion Battery (NP-20);...
Page 293 CASIO COMPUTER CO.,LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan MA0710-C...

This manual is also suitable for:

Ex-s880bk - exilim card digital camera Ex-s880rd - exilim card digital camera Ex-s880sr

Casio Exilim EX-S880 User Manual

Unpacking

Quick Start Basics

Introduction

Getting Ready

Shooting a Snapshot

Shooting a Movie

Using Best Shot

Advanced Settings

Viewing Snapshots and Movies

Editing Images

Using Audio

Managing Your Files

Deleting Files

Other Settings

Printing

Using the Camera with Acomputer

Your Camera (Data Storage)

Transferring Documents to Your Camera (Data Storage)

Appendix

Quick Links

Digital Camera

Need help?

Questions and answers

Related Manuals for Casio Exilim EX-S880

Summary of Contents for Casio Exilim EX-S880