Others - Panasonic DMR-EX95V Operating Instructions Manual

FUNCTIONS
FUNCTIONS
To Others
Setup
Remote Control
Clock
Tuning
Power Save
Disc
Quick Start
Picture
Sound
DivX Registration
Display
System Update
Connection
Initialize
VHS
SELECT
TAB

Others

RETURN
Clock
Automatic
Time Date
10 : 52 : 04 20
Please set the clock.
CHANGE ENTER : access RETURN : leave
ENTER
RETURN
DivX Registration
DivX ( R ) Video On Demand
Your registration code is : 9X34TTKW
To learn more visit www.divx.com/vod
ENTER
RETURN
Setup SETUP
DVD 1
Others
Remote Control
Off
On
Change the code of the remote control so that you can simultaneously
operate another Panasonic DVD unit.
Clock
Clock setting
The clock will normally be set correctly during Auto-Setup however, under certain
circumstances the DVD Recorder cannot set the clock automatically. In this case follow
the operation steps below to manually set the clock.
On
Switch with
Change with
. 03 . 2006
Confirm the change with ENTER.
Don't forget to change summer time and winter time.
Activating the automatic time correction function
The correct time for the clock can be automatically maintained when the DVD Recorder
is tuned to a station that transmits a time signal.
Switch with
The automatic setting of the clock begins.
Under adverse reception conditions, etc., the Automatic time correction function may not
work. In this case the indication for Clock setting is automatically reset to [Off]. If the
reception conditions improve later on, it is possible to activate this function.
If the Clock setting is set to [On], do not set it to [Off], otherwise the automatic time
correction function is deactivated.
This DVD Recorder uses a 24-hour-clock.
In the event of a power failure an automatic back-up system maintains the clock for
approximate 60 minutes.
When the Clock setting is set to [On], the automatic time correction function checks and
if necessary adjusts the time several times every day. The automatic time correction
function only works when the DVD Recorder is in standby, it does not work in the
TimerRecording mode.
Power Save
On: Power-save feature in Standby mode.
The brightness of the display field in power-save mode cannot be changed.
The Quick Start setting is set to [Off]. If you want to connect an external unit via the
AV2 Scart terminal, the DVD Recorder must be switched back on from Standby mode.
Off: The brightness of the display field can be changed.
Quick Start
On: The unit switches on from Standby mode in approx. 1 second.
In Standby mode, more power is used and Power Save is set to [Off].
DivX Registration
In order play purchased or borrowed DivX files on this unit, you need the individual
registration code for the unit. The code is displayed here. Please write it down.
Initialize
Shipping Condition: All settings, except for the security levels with the associated
password, the time settings and the owner ID are reset to the factory-default settings.
Default Settings: All settings, except for the programmed channels, time, country,
language and disc language settings, the security levels including password, the
remote control code and the owner ID are reset to the factory-default settings.
DVD
Setting
automatic mode to [Off] and confirm with ENTER.
and Time and Date.
automatic mode to [On] and confirm with ENTER.
HDD VHS
Option
ENTER
[DVD 1] [DVD 2] [DVD 3]
[On] [Off]
[On] [Off]
[Shipping Condition] [Default Settings]
SD
ENTER
6
71